Parts for Electrolux EIED5CHIW0: 05 - Front Panel / Lint Filter Parts

This door gasket is the flexible sealing strip that helps keep cold air inside your refrigerator, improving temperature stability and efficiency. It replaces worn or torn seals to reduce drafts and moisture intrusion. What it does:

• Creates an airtight seal around the refrigerator door to help maintain proper internal temperature
• Helps prevent frost buildup and condensation by keeping warm, humid air out
• Reduces energy waste caused by cool-air leaks around the door
• Can fix common symptoms like warm spots near the door, excessive frost, or an overworking compressor

• High-level replacement: usually removed from the door channel and pressed into place; may require loosening door hinges for full removal on some models
• Check that the gasket sits evenly in the channel and that the door closes flush to ensure a proper seal
• Clean the door channel and mating surface before installing to ensure good adhesion and sealing

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

This outer cabinet trim frame secures and finishes the appliance front, restoring a clean appearance and proper alignment of the control and door areas. It's a straightforward replacement for damaged or bent front trim. What it does:

• Replaces a worn, cracked, or dented outer cabinet frame to restore fit and finish
• Helps align adjoining panels and maintains a flush front appearance
• Keeps internal components protected by providing structural support at the front
• Addresses visible cosmetic damage and reduces gaps that can collect dirt

• One outer cabinet trim frame

• Disconnect power before beginning any repair to reduce risk of shock or injury
• Remove adjacent trim pieces and fasteners as needed; handle painted surfaces carefully to avoid scratches
• Use proper fasteners and torque to avoid warping the frame; some shifts may require minor realignment

This hinge secures and lets a refrigerator door pivot smoothly, restoring proper door alignment and sealing for consistent cooling. Replace a worn or bent hinge to fix sagging doors and uneven gaps that stop the door from closing correctly. What it does

• Provides the pivot point that lets the refrigerator door open and close
• Restores proper door alignment and a tight seal to help maintain interior temperature
• Stops sagging or tilted doors that catch or don't latch fully
• Replaces damaged, bent, or worn hinge hardware that causes noisy or uneven movement

• Disconnect power and empty the door before starting to reduce weight and risk of tipping
• Support the door during removal and installation to prevent damage or personal injury
• Use correct fasteners and torque to factory specification; do not overtighten
• Check striker/closer components and gasket condition

This is a genuine replacement screw used to secure internal or external appliance components. It restores proper fastening so panels, brackets, or small parts stay firmly in place and reduces rattling or loose-fit issues. What it does

• Fastens appliance parts and panels to maintain structural fit and alignment.
• Prevents movement or vibration that can cause noise or wear.
• Replaces missing, stripped, or corroded screws to restore secure connections.
• Compatible with common mounting locations where the OEM screw is specified.

• Disconnect power to the appliance before beginning any repair.
• Use the correct screwdriver or bit to avoid stripping the head.
• Thread carefully and do not overtighten to prevent damage to threads or plastic components.
• Keep small parts away from children and pets.

This insulator is a small foam/trim piece that cushions and thermally isolates appliance panels to help maintain proper airflow and reduce vibration. It preserves fit between cabinet components for quiet, efficient operation. What it does:

• Cushions panels and components to reduce rattling or vibration noise
• Creates a thermal barrier that helps limit heat transfer between parts
• Keeps panels aligned and spaced to prevent rubbing or abrasion
• Worn or missing insulators can cause noise, vibration, or poor panel fit

• One insulator as shown

• Disconnect power before accessing panels or internal components
• Replace only the worn or damaged insulator; trim or adhesive may be needed to position some styles
• Remove surrounding trim or panels as required to reach the mounting location

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

This is a genuine OEM screw used to secure appliance components. It replaces a missing or damaged fastener so panels, brackets, or assemblies stay properly attached and the appliance operates safely. What it does:

• Secures panels, brackets, or small assemblies to the appliance frame
• Restores proper fit and alignment where a screw was lost or damaged
• Helps prevent rattling, vibration, or parts coming loose during use
• Matches original thread and length for a correct fit when replacing worn hardware

• One OEM screw as shown

• Turn power off and unplug the appliance before servicing
• Use the matching screwdriver or bit to avoid stripping the head
• Tighten snugly but avoid over-torquing to prevent thread or part damage
• Keep removed hardware organized so all original screws are replaced

This gasket forms a tight seal between mating components in your appliance, helping contain water, air, or heat as designed. Replacing a worn gasket restores proper sealing and helps prevent leaks, performance loss, and residue buildup. What it does:

• Creates a compressible seal between two parts to prevent leakage and maintain proper airflow or water containment
• Helps reduce rattles and wear at the joint by cushioning the connection
• Supports efficiency and consistent performance by keeping the system properly sealed
• Common symptoms of failure: visible cracks/tears or flattening, leakage at the joint, heat or moisture escaping, or persistent odors near the seal

• 1 gasket

• Disconnect power; shut off water supply before servicing
• Note the gasket's orientation and take reference photos during disassembly
• Remove the old gasket and thoroughly clean mating surfaces of residue or debris
• Seat the new gasket evenly without stretching; reassemble and test for a proper seal

This replacement latch secures an appliance door or drawer by engaging its mating strike so it stays closed during use. Restoring a worn latch helps ensure reliable closure and proper operation when the control checks for a closed position. What it does:

• Mechanically holds the door/drawer shut by engaging the strike/catch
• Helps the appliance recognize a closed condition for starting or continuing a cycle
• Addresses issues where the door/drawer won't stay closed or pops open
• Common symptoms include "door open" messages or cycles that won't start

• 1 latch

• Disconnect power before servicing; turn off water supply if working on a washer
• Use basic hand tools to remove the old latch and transfer any reusable screws/clips
• Align the new latch with the strike/catch for smooth engagement
• Close and test the door/drawer several times before running a cycle

This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:

• Detects door position and allows operation only when the door is fully closed
• Interrupts operation when the door opens for safety
• Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
• Intermittent starts due to worn actuator or internal switch contacts

• 1 door switch

• Disconnect power before servicing
• Access the switch from the front or top panel; release mounting screws or tabs
• Move wires to the new switch one at a time to maintain correct positions, then secure the switch
• Test operation before reassembly

This is a genuine replacement screw used to secure appliance panels and components. It provides a simple, reliable fix for loose or missing fasteners so panels and parts stay properly attached. What it does:

• Fastens panels, brackets, or components in place to restore original fit
• Replaces missing or stripped screws that cause rattling or loose parts
• Matches OEM thread and head style for correct seating and torque
• Helps eliminate vibration-related noise by securing loose pieces

• One replacement screw as shown

• Inspect mating threads and clear any debris before installing the new screw
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or parts
• Disconnect power and follow appliance safety guidelines before servicing

The Lint Filter is an OEM part for Frigidaire dryers. This component is crucial for trapping lint and debris that come off clothes during the drying process. By capturing this lint, the filter prevents it from clogging the dryer’s internal mechanisms and vent, thereby enhancing the efficiency of the dryer and reducing the risk of fires. 

Symptoms of a bad Lint Filter include:

• Excessive lint escaping back into the dryer drum or venting system.
• Tears or holes in the filter mesh that fail to trap lint.
• Difficulty fitting the filter into its slot due to warping or damage.
• Longer drying times or overheating, indicating poor air flow.

Causes of a bad lint filter can include normal wear and tear from regular cleaning and use, accidental damage during removal or cleaning, or degradation from exposure to high heat.

The Lint Filter is an OEM replacement part for Frigidaire, Electrolux, Gibson, and Kenmore dryers.

This clip is a hose clamp used in select laundry appliances. It secures a hose connection to prevent leaks and keep water or air moving where it should, helping maintain reliable washer or dryer performance.

• Secures hose to its fitting to prevent leaks or disconnections
• Helps resolve issues like leaking at a hose joint, loose hose, or poor draining/airflow related to a slipped hose
• Durable spring-style clamp designed for repeatable tension
• Commonly used on internal washer or dryer hose connections

• Unplug the appliance and turn off water supply before service
• Have a towel or pan ready for residual water when removing hoses
• Use pliers to compress and slide the clamp; note original clamp position for reassembly
• Inspect hose ends for cracks; replace the hose if damaged before reinstalling the clamp

The Support Roller Washer is an OEM part for Frigidaire dryers, designed to ensure the smooth and stable operation of the dryer drum. Positioned between the support roller and the shaft, this washer plays a critical role in reducing friction and wear, allowing the drum to rotate smoothly and quietly.

Causes of these symptoms often stem from normal wear and tear, which can lead to the degradation of the washer over time.  

Symptoms of a bad Dryer Support Roller Washer include:

• Unusual noises, such as squeaking or grinding, indicating increased friction during drum rotation
• The dryer drum appears to wobble or is misaligned during operation
• Increased vibration of the dryer, which can lead to wear on other components

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Roller Assembly is an OEM replacement part specific to Frigidaire-brand clothes dryers. It contains multiple smooth-rolling cylinders that guide the dryer drum assembly as it turns. 

Symptoms of a faulty dryer roller assembly include: 

• Noisy or rumbling sounds from the dryer cabinet during cycles 
• Vibrating of the dryer body instead of steady drum rotation
• Physical signs like cracked rollers or worn tracks that hold them  

Causes can be seized or corroded rollers failing to spin freely. Dented tracks prevent proper alignment. Over decades, components have worn down from continuous operation.

The part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This OEM fastener replaces a worn, stripped, or missing nut to securely hold components in place inside compatible laundry appliances. Restores proper clamping force to reduce vibration, rattling, and loosening during operation. What it does:

• Secures a mating bolt or stud to keep brackets, panels, or rotating parts firmly mounted
• Restores proper tension after the original nut is lost, corroded, or damaged
• Helps address symptoms like excessive vibration, rattling, or loose assemblies
• Maintains a tight connection in high-vibration environments when properly tightened

• 1 nut

• Disconnect power (and water to a washer) before servicing
• Support the component being fastened; hold the bolt head while loosening/tightening the nut
• Start threads by hand to avoid cross-threading; tighten to manufacturer guidance
• Replace any damaged bolts or hardware it mates with for a secure repair

This trim ring is a replacement surface trim piece that restores the finished look and edge around the appliance opening. It provides a clean, secure edge and replaces bent, cracked, or missing trim to improve appearance and fit. What it does

• Covers and finishes the exposed edge of the appliance opening for a clean appearance
• Secures and aligns adjacent components by providing a stable mounting edge
• Addresses cosmetic damage such as dents, cracks, or paint loss around the opening
• Helps prevent small items from getting caught in the exposed edge

• One trim ring

• Disconnect power to the appliance before starting any repair
• Removal typically requires loosening mounting screws or clips; keep hardware for re-use unless damaged
• Handle edges carefully; part and surrounding metal may be sharp
• If the trim mounts to or around other components (elements, panels), support those parts during removal and reinstallation

This retainer secures appliance panels and components to keep assemblies aligned and stable, restoring proper fit and reducing noise or vibration. Use when a clip or bracket has broken, come loose, or no longer holds parts in place. What it does:

• Holds trim, panels or internal components in position to prevent rattling and misalignment
• Replaces worn or broken clips that allow gaps or loose parts
• Helps restore a snug fit after service or component replacement
• Works as a simple fastener to maintain proper assembly alignment

• Disconnect power to the appliance before beginning any repair
• Installation typically requires basic hand tools; handle small clips carefully to avoid losing them
• Inspect surrounding clips and mounting points and replace any damaged hardware

Replacement striker for the refrigerator door latch that provides the catch point for the door to close securely. Restores proper door engagement to help maintain a tight seal and consistent internal temperature. What it does:

• Provides the catch point for the door latch so the door closes and stays latched
• Helps maintain an effective door seal to preserve cooling performance
• Common symptom: door won't stay closed, pops open, or fails to latch
• Also helps reduce drafts and noise caused by a misaligned latch

• Turn off power to the appliance before starting work
• Access the striker area, remove mounting fasteners, and replace with the new striker
• Align the striker so the latch engages smoothly; tighten screws securely
• Use care not to overtighten or strip mounting holes; replace damaged hardware as needed

This inner oven door glass panel replaces damaged or broken oven door glass to restore safe viewing and help the door seal properly. It's the interior glass used behind the outer door for protection and visibility. What it does:

• Replaces cracked, chipped, or shattered inner oven door glass
• Restores clear view into the oven cavity for safe cooking checks
• Helps maintain the oven door's sealing surface and inner insulation
• Prevents loose glass pieces from falling into the oven cavity

• Wear cut-resistant gloves and eye protection; broken glass is sharp
• Remove the oven door per the manufacturer's instructions before disassembly
• Handle with care to avoid scratches or chipping the edges
• Keep track of all fasteners and orientations for reassembly

Replace a cracked or cloudy door window with this outer lens. It forms the transparent exterior panel of the door, protecting the inner window and restoring a clean look and clear view into the drum during cycles.

• Forms the exterior, see-through panel of the door window
• Shields the inner window and helps the door close evenly against its trim
• Replace if the outer window is cracked, chipped, warped, loose, or discolored/cloudy
• Damage may cause poor visibility or sharp edges around the door opening

• Disconnect power before servicing the appliance
• Remove the door and place it on a padded surface
• Separate inner/outer door panels, note screw locations, and lift out the old lens
• Clean mating surfaces; set the new lens in place and reassemble without over-tightening screws

Replace a cracked or cloudy door window with this outer lens. It forms the transparent exterior panel of the door, protecting the inner window and restoring a clean look and clear view into the drum during cycles.

• Forms the exterior, see-through panel of the door window
• Shields the inner window and helps the door close evenly against its trim
• Replace if the outer window is cracked, chipped, warped, loose, or discolored/cloudy
• Damage may cause poor visibility or sharp edges around the door opening

• Disconnect power before servicing the appliance
• Remove the door and place it on a padded surface
• Separate inner/outer door panels, note screw locations, and lift out the old lens
• Clean mating surfaces; set the new lens in place and reassemble without over-tightening screws

This cover is a replacement access panel that protects internal components and helps maintain appliance appearance. It restores the appliance's finished look and keeps wiring and parts shielded from debris. What it does:

• Shields internal components and wiring from dust, moisture, and accidental contact
• Restores the appliance's exterior appearance after service or damage
• Helps maintain proper airflow routing around covered components
• Useful when replacing or servicing internal modules that require a protective panel

• Remove power to the appliance before attempting installation to avoid shock or injury
• Installation typically requires removing nearby trim or fasteners; keep screws and clips for reuse
• Handle carefully to avoid scratching the finish or bending mounting tabs
• If mounting holes or clips don't align, recheck part number.

This factory fastener secures appliance components and cabinet panels. Replacing a stripped, rusted, or missing screw restores a tight fit, reduces rattles and vibration, and keeps parts aligned for reliable operation. What it does:

• Fastens brackets, panels, and internal components to the cabinet/frame
• Helps maintain alignment and stability under vibration
• Direct replacement when the original is lost, corroded, or threads are damaged
• Common symptoms: loose or rattling panels, gaps/misalignment, or visibly missing hardware

• 1 screw

• Disconnect power; shut off gas/water if applicable before servicing
• Support the panel or component while removing/starting screws
• Match location and length to the original; start threads by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent stripping

This LED interior lamp assembly replaces a failed fridge light to restore bright, efficient illumination inside the appliance. Designed as a direct-fit replacement for the OEM lamp module, it improves visibility for food storage areas. What it does

• Provides bright, energy-efficient interior lighting for refrigerator compartments
• Replaces a non-working, flickering, or dim fridge light
• Fits into the existing light housing or module to restore normal illumination
• Helps you see contents clearly so you can find items faster

• One LED interior lamp assembly (single)

• Disconnect power to the appliance before starting any work
• Remove the light cover/diffuser per appliance instructions to access the lamp assembly
• Handle the lamp carefully and avoid forcing connectors; align and seat the module fully

This retainer is a small fastener that secures a component inside your appliance, keeping it correctly positioned during operation. Replacing a damaged or missing retainer helps eliminate looseness and noise while preventing wear from parts shifting.

• Holds a mating part or assembly firmly in place
• Restores proper fit when the original retainer is cracked, warped, or missing
• Common symptoms: loose or misaligned parts, rattling/vibration, rubbing noises
• Helps prevent premature wear from movement or chafing

• Disconnect power; shut off gas and water supplies if applicable
• Use your model's diagram to locate the retainer and match its orientation
• Transfer any reusable hardware and ensure the retainer is fully seated
• Reassemble and run a short test to check for proper operation

This metric machine screw features an M5 x 0.8 thread used to secure panels and assemblies inside your appliance. Replacing missing or damaged hardware restores a tight, rattle-free fit and helps maintain proper alignment of parts.

• Fastens appliance components using an M5 x 0.8 machine-thread
• Replaces missing, loose, or stripped screws
• Helps reduce vibration and rattling noises
• Maintains correct alignment of brackets, panels, or internal assemblies

• Disconnect power before servicing; if working near water connections, shut off the supply.
• Match thread and length to the original screw and replace in the same location.
• Start threading by hand to avoid cross-threading; use the correct driver and do not overtighten.
• Reinstall any original washers or lock hardware used with the screw.

The High Temperature Adhesive is an OEM part for Frigidaire appliances. This adhesive is specifically formulated to withstand high temperatures and is used in various repair applications within appliances such as ovens, ranges, and dryers.The 1-ounce tube contains adhesive formulated to withstand the extreme heat inside dryer drums and cabinets

Causes of a bad adhesive can include exposure to extremely high temperatures over extended periods, contamination by dirt or grease, or the natural aging and drying out of the adhesive.

Symptoms of a bad high temperature adhesive include:

• Components or parts becoming loose or detached
• The adhesive becoming brittle or cracked
• Inability to properly bond surfaces exposed to high heat
• Visible deterioration or peeling of the adhesive

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.