Gaggenau Range / Cooktop / Oven Parts

Spring for knob that restores proper tension and return action to a control knob, helping knobs operate smoothly and stay in position. Use this small replacement when a knob feels loose, won't center, or won't return. What it does:

• Provides tension and return action for a control knob so it centers and responds correctly.
• Replaces worn or broken knob springs that cause loose, wobbly, or non-returning knobs.
• Works as the mechanical spring behind the knob's rotation and detent action.
• Small, straightforward part used wherever a control knob needs restored tension.

• Disconnect power to the appliance (unplug or switch off circuit breaker) before servicing.
• Remove the knob and any bezels per the appliance's service instructions to access the spring.
• Handle small parts carefully; keep orientation noted for correct reassembly.

This oven temperature probe is the internal sensor that monitors cooking cavity temperature so the oven control can regulate heat for accurate cooking and bake results. It's a direct-replacement sensing probe for compatible Bosch ovens. What it does:

• Measures internal oven temperature and sends readings to the control board
• Allows the oven to maintain set temperatures for consistent cooking
• Common symptoms of a failing probe: inaccurate oven temps, oven not reaching set temperature, or temperature-related error codes
• Works with the oven's control system to help cycle heating elements or gas valve

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle the probe and its wiring gently; avoid sharp bends or pulling on connectors
• Verify connector orientation and secure connections to the control board per OEM diagram

This replacement temperature control knob restores a worn or broken dial so you can set oven or range temperatures accurately and safely. It provides a simple push-on fit for straightforward control panel operation. What it does:

• Replaces a cracked, stripped, or missing temperature control knob to restore user control
• Allows precise selection of temperature settings via the control shaft
• Improves grip and visibility of setpoint compared to damaged knobs
• Prevents slipping on the control shaft for consistent temperature adjustments

• One (1) temperature control knob

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the old knob by pulling straight off the control shaft; push the new knob onto the shaft until fully seated
• If the knob does not fit, verify you have the correct shaft style and part number before forcing installation

Replace a bent, warped, or missing oven rack. This wire shelf installs inside your oven to provide stable support for cookware and bakeware at the correct height.

This fast radiant cooktop element replaces a damaged or non-working surface burner to restore even, reliable heating on compatible electric glass-ceramic ranges. It's a direct-fit heating element designed for 4-wire connections. What it does:

• Heats cookware quickly via the radiant heating surface for stovetop cooking
• Replaces cracked, non-heating, or intermittently heating burners
• Restores consistent temperature response and even heat distribution
• Works with 4-wire cooktop wiring; matches OEM element size and mounting

• One fast radiant cooktop element (180 mm / 7 in., 4-wire)

• Disconnect power at the breaker before servicing the cooktop to avoid shock
• Handle glass-ceramic surfaces carefully to prevent cracking; lift element per your model's service instructions
• Match wire colors/terminals exactly and secure connections;
• Test cooktop function after installation and re-seat any trim or retainers per the manufacturer guide

This is a control knob designed for use on a gas range cooktop or oven. It attaches to the control shaft and allows you to select burner or oven temperature settings. Replace this knob if it is cracked, broken, or if the printed markings have worn off, making it difficult to set the correct heat level.

The grill heating element is a 230-volt, 1500-watt radiant coil or surface element that generates intense direct heat for grilling or broiling food in your range or cooktop. It glows red-hot to sear and brown food from above or below depending on its position. Replace this element if it no longer heats up, heats unevenly, has visible breaks or burn spots, or causes your circuit to trip when in use.

This is a replacement mounting nut for VG 230 assemblies. It provides a secure threaded connection to help keep the VG 230 component fastened and stable, restoring proper fit and reducing vibration-related looseness. What it does:

• Secures the VG 230 component to its mounting or mating hardware
• Maintains a tight threaded connection to prevent part movement or loosening
• Helps preserve alignment and stable operation of the connected assembly
• Can be used during routine repairs or when replacing stripped or damaged fasteners

• Disconnect power and any supply lines before starting repairs; follow appliance safety procedures
• Use the correct socket or wrench to avoid rounding the nut; hand-start the threads to prevent cross-threading
• Tighten to a snug fit—do not overtighten to avoid damaging mating threads or components
• If threads are damaged or corroded, replace mating hardware.

A replacement door switch that lets the appliance detect door open/close and enables normal operation and lighting. Restores reliable door sensing so cycles start and interior lights respond when the door opens. What it does:

• Detects when the door is opened or closed so the appliance can start or stop cycles safely
• Enables or disables the interior light based on door position
• Commonly replaces a faulty or intermittent switch that prevents the unit from starting or the light from working
• Simple electrical/mechanical switching — designed to match original function

• Disconnect power before inspecting or replacing the switch to avoid shock risk
• Access may require removing the control panel or inner door trim depending on model
• Handle the switch and connectors carefully to avoid damaging terminals or wiring

This insert or lining fits inside the oven door, serving as a protective overlay between the inner and outer door panels. It helps with insulation and provides a finished interior surface on the door. Replace this part if the door liner is warped, discolored, cracked, or if heat is escaping excessively from the oven door.

This bulb-frame gasket seals the appliance door to prevent water and heat leaks and help the door close evenly. It restores a tight seal for better performance and reduces noise from a loose or damaged seal. What it does:

• Creates a watertight/airtight seal around the door frame to prevent leaks and heat loss
• Cushions the door edge so it closes smoothly and stays aligned
• Helps reduce vibration and rattling caused by a worn or compressed seal
• Common symptom: visible leaks at the door, steam or heat escaping, or a door that doesn't sit flush

• Disconnect power and water before starting any repair
• Remove the door or access panel for easier gasket replacement
• Work the gasket bead evenly into the door channel, ensuring the bulb is fully seated all the way around

Directs gas flow to the burner ports on your gas range. Replace if your burner tip is clogged, damaged, or corroded to restore proper gas distribution.

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly