Parts for Ge PGP976SET1SS: 02 - Gas & Burner Parts

This orifice spud controls propane gas flow to a single range burner, allowing correct LP burner performance and flame size. It's a direct-fit replacement used when the burner needs the LP-specific orifice. What it does:

• Metering point that regulates propane (LP) gas to the burner so the flame burns correctly
• Required when converting a natural gas appliance to LP or replacing a worn LP orifice
• Sized for 9.1K (LP) flow rating to match the burner's designed output

• One orifice spud (LP 9.1K)

• Turn off gas supply and disconnect power before servicing
• Replace only with the exact LP orifice specified for the burner
• Hand-start the part, then tighten to manufacturer torque if provided; avoid over-tightening
• After installation, check all gas connections for leaks with a soap solution or a gas leak detector

This economic nut is a small replacement fastening nut that restores secure connections for appliance components. It replaces worn or missing hardware so panels and internal parts stay firmly seated and reduce vibration. What it does:

• Secures components and panels by threading onto the matching stud or bolt to hold assemblies in place
• Prevents loose or rattling panels and hardware caused by a missing or damaged nut
• Restores proper fit for user-accessible panels and internal brackets where this nut is specified
• Simple hardware replacement to regain stable mechanical connections

• Disconnect power and water (if applicable) and follow basic electrical safety before servicing the appliance
• Use the matching size wrench or socket; thread-on by hand first to avoid cross-threading, then snug—do not overtighten
• Inspect mating stud or bolt for damage; replace hardware that is stripped, corroded, or deformed

This orifice spud controls LP gas flow to a cooktop burner, restoring proper flame size and reliable ignition. It's a direct-fit replacement designed for safe operation of the burner when the original spud is damaged or missing. What it does:

• Directs and meters liquid propane (LP) to the burner for correct flame characteristics
• Helps restore steady ignition and consistent, even flame distribution
• Common fix for weak, uneven, or no-flame burner symptoms
• Matches factory orifice sizing to maintain designed burner performance

• One orifice spud (LP, 5K)

• Turn off gas supply and power before servicing the appliance
• Only install on compatible burners using the correct LP orifice size for your appliance
• Use proper tools; do not force or cross-thread the spud
• After installation, check for gas leaks per local codes and manufacturer instructions

This 120V appliance buzzer provides the audible alert for cycle completion and user notifications, restoring clear beeps when your appliance's buzzer has failed or gone silent. Ideal for ovens, ranges, and similar appliances that use a 120V signal. What it does:

• Produces audible alerts for cycle end, error notifications, and timer signals
• Commonly replaces units that are silent, intermittently loud, or emit distorted/weak tones
• Matches the OEM electrical rating to ensure proper signalling at 120 volts
• Designed for direct replacement of the original buzzer assembly

• Disconnect power to the appliance before servicing to avoid shock hazard
• Minimal tools typically required; handle the part and wiring carefully to avoid damage

This hold-down bracket secures a designated component inside your appliance, keeping it firmly anchored during use. Replace a bent, broken, or missing bracket to stop movement and rattling and restore proper alignment and a stable, factory fit. What it does:

• Anchors the specified part to the appliance frame/cabinet to prevent shifting
• Reduces vibration and rattling noises during operation
• Helps maintain correct alignment and spacing for reliable performance
• Replace if the bracket is bent, cracked, corroded, or missing

• 1 hold-down bracket

• Disconnect electrical power; for gas appliances, also shut off the gas supply
• Note the original orientation and screw locations before removal (a quick photo helps)
• Reuse existing mounting hardware unless your model specifies new fasteners
• Do not overtighten; verify the secured component is aligned and stable before restoring power

This gas pressure regulator controls and stabilizes incoming gas pressure to your appliance. A properly regulated supply helps ensure steady flames and consistent heating performance when cooking or baking.

• Regulates and maintains correct gas pressure to the range/oven
• Convertible design for Natural Gas or LP setups
• Issues may include weak or uneven flames, burners not lighting, or oven temperature problems
• Can help address gas odor concerns when the source is an internal regulation fault

• Disconnect power and shut off gas before service; verify no leaks after installation
• Follow the appliance's conversion/installation instructions for NG/LP configuration
• Use approved thread sealant on threaded fittings as directed by the manufacturer
• After installation, perform a leak test and verify proper burner operation and flame quality

The Single Valve is an OEM part for GE ranges. This part controls the flow of gas to the burners on the cooktop, ensuring precise and safe operation during cooking.

Causes of a bad valve can include wear and tear over time, exposure to high heat, or damage from improper handling or installation. 

Symptoms of a bad Single Valve include:

• Burners not igniting or having a weak flame
• Gas smell near the valve or cooktop
• Inconsistent burner performance
• No gas flow to the burners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Valve Gas is an OEM part for GE ovens and ranges. This valve controls the flow of gas to the oven or range burners, ensuring that the appliance can ignite and maintain a stable flame for cooking. It is a critical component for the safe and efficient operation of gas-powered cooking appliances.

You should replace the valve gas if it becomes faulty. Causes of a bad gas valve can include wear and tear over time, corrosion from exposure to gas, or damage from electrical surges. A malfunctioning gas valve can prevent the appliance from igniting, result in irregular flame patterns, or pose a safety hazard due to gas leaks.

Symptoms of a bad Valve Gas include:

• The oven or burners not igniting
• Irregular or unstable flame patterns
• The smell of gas near the appliance
• The appliance turning off unexpectedly during use

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Spark Module is an OEM part for GE cooktops. Located within the cooktop's control unit, this module is responsible for generating electric sparks to ignite the burners. Consisting of electronic components and wiring, the spark module works with other systems to reliably and safely light the gas or electric burners.  

Symptoms of a bad spark module include:

• Burners not lighting or lighting intermittently  
• Repeated flashing of the burner indicator lights  
• Clicking or buzzing sounds coming from the control unit

Causes of a failed spark module can be exposure to moisture, dust or debris accumulating inside the control unit over time as well as mechanical or electrical degradation of the ignition components.

This genuine OEM GE replacement part is also compatible with some Kenmore cooktop models that use GE's control systems.

LED board assembly that powers and controls the appliance's LED status lights and display backlighting, restoring readable indicators and panel illumination. Replaces a failed LED module on compatible control panels. What it does:

• Supplies power and signal control to LED status lights and display backlighting.
• Restores dim, flickering, or non-functioning LEDs and panel illumination.
• Helps recover visible control indicators used for status and user feedback.
• Matches standard connector locations and mounting points on the console.

• Disconnect power to the appliance before servicing to avoid shock.
• Remove the console or control panel to access the board; keep screws and small parts organized.
• Handle the board by the edges and avoid touching LED lenses or circuit components.
• Verify connector orientation and secure all wire harnesses.

Right angle

This tube burner supplies and shapes the gas flame for the right-front cooktop burner, restoring proper heating and even flame distribution. It's a direct-replacement cooktop component used on compatible GE gas ranges. What it does:

• Channels gas from the valve to the burner ports to produce the cooking flame
• Restores an even, stable flame when the original tube is cracked, clogged, or damaged
• Can correct weak or irregular flames and ignition failures at the right-front burner
• Works with the burner head/cap and ignition system to ensure consistent ignition

• One right-front tube burner

• Turn off gas supply and disconnect power to the appliance before servicing
• Remove burner cap and head to access the tube; inspect and clean mating surfaces before installing
• Replace only with the correct tube orientation and secure any retaining hardware; test for proper ignition and flame pattern after reassembly

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.

This factory screw secures components on GE cooking appliances. Replacing a lost or stripped fastener helps keep parts tight and aligned for safer, rattle-free operation.

• Fastens brackets, panels, trim, or burner components on a range, cooktop, or wall oven
• Replaces missing, corroded, or stripped hardware
• Helps reduce looseness, vibration, or rattling noises
• Restores proper alignment after service or cleaning

• Disconnect power and shut off gas supply. Allow the appliance to cool completely.
• Match this screw to the original and install in the same location.
• Use the correct driver; hand-tighten and avoid overtightening to prevent stripped threads or cracked parts.
• If mating threads are damaged, repair or replace the affected component before reassembly.

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

Replacement fastener used to secure appliance components. If a screw is missing or damaged, panels and brackets can loosen or rattle. Installing a new screw restores a tight fit and helps keep parts properly aligned.

• Fastens panels, brackets, or internal components as designed for the model
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration/rattling and restores proper fit
• Maintains alignment and a secure assembly after service

• Disconnect power; shut off gas if applicable before servicing
• Support components while removing/installing fasteners
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace all required screws in a location for even clamping and proper fit

This replacement screw secures appliance components and helps keep panels, brackets, and controls firmly attached for reliable operation. It's a simple, direct fix when a mounting screw is missing, loose, or stripped. What it does:

• Fastens panels, trim, brackets or electrical components to reduce movement and rattling.
• Restores proper alignment of parts that shift when a screw is missing or worn.
• Helps maintain electrical and mechanical connections by keeping components seated.
• Common symptom: loose or vibrating panels, trim gaps, or visibly missing hardware.

• Disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Thread gently and avoid overtightening to prevent stripping the mating threads or cracking surrounding parts.
• Keep any removed hardware organized to ensure placement of all required fasteners during reassembly.

Black. 8-18 AB HXW 3/8