Parts for Viking Range VGIS36: Gas / Electrical Components Parts

Light bulb socket assembly includes: Light bulb socket, light bulb and light lens.

Fix uneven heating or burner flame issues with this gas range infrared burner orifice. Precision gas flow control part for professional ranges.

Infrared burner won't heat properly or flame is uneven? This gas orifice controls gas flow to restore correct flame size and consistent searing performance.

This broil safety tubing connects the broiler burner to the appliance's safety valve, maintaining a secure gas pathway for safe broil operation. It helps ensure consistent broiler ignition and proper gas flow for baking and broiling. What it does:

• Routes gas between the broil burner and the safety/relief valve to support safe operation
• Helps maintain steady ignition and flame for the broiler burner
• Worn or damaged tubing can cause broiler failure, weak or uneven flames, or a gas odor near the appliance
• Replacing damaged tubing restores a secure, leak-free gas connection when the rest of the valve assembly is serviceable

• Turn off gas supply and disconnect power before servicing; test for leaks after installation
• Only install if tubing matches the original shape and fittings; improper routing can cause kinks or abrasion
• If other valve or burner components are damaged, replace the entire valve/burner assembly per OEM guidance

Fix weak or uneven broiling with this infrared broil burner kit. Restores high-heat searing performance. Moderate difficulty, 1-2 hour installation.

Oven won't heat but igniter glows? This flat hot surface ignitor restores reliable gas ignition. DIY repair takes 45 minutes with basic tools.

If your gas oven won't heat or ignite properly, this bake safety valve controls gas flow to the bake burner. Restores safe ignition and heat control.

Oven won't heat or heats unevenly? This bake safety valve controls gas flow to the bake burner and provides safety shutoff during flame issues.

Oven not heating or heating unevenly? A faulty oven burner is often the cause. This gas range burner generates the flame that heats your oven chamber.

This bimetal gas control valve regulates gas flow to the oven burner as part of the ignition circuit, helping ensure safe light-off and steady, reliable heat so your range reaches and maintains the set temperature.

• Regulates gas to the burner in response to the igniter/thermostat signal
• Bimetal safety design keeps gas closed until proper ignition heat is present
• Helps maintain consistent heating once the burner is lit
• Can address cases where the igniter glows but the burner won't light
• Resolve ovens that heat intermittently or take unusually long to preheat

• Disconnect power and shut off gas supply before servicing.
• Note valve orientation; transfer any required fittings/orifices from the original.
• Use approved gas-rated thread sealant on NPT threads only; never on flare connections.
• After installation, leak-test all joints and verify proper ignition and burner operation.

22-inch pipe nipple for gas range installations. Connects gas supply lines in professional-style ranges. Replace if damaged, corroded, or missing.

Uneven flames or weak burner heat? This burner orifice hood centers fuel flow for proper combustion. Restores consistent flame performance on your range.

Uneven flame or incorrect burner output? This #50 orifice hood regulates gas flow to your burner. Common repair for flame issues. Moderate difficulty.

Uneven flame or poor burner performance? This orifice hood centers and protects the gas orifice for steady flame control. Simple DIY repair part.

This 1/2" x 1/4" rubber bumper cushions contact points to reduce noise and prevent damage on appliance doors, drawers, and panels. It restores proper cushioning for smoother, quieter operation and helps maintain a snug fit. What it does:

• Absorbs shock where panels or doors meet to reduce rattling and clapping noises
• Prevents metal-to-metal contact that can cause chipping, scratching, or wear
• Helps doors and drawers close more evenly by restoring original spacing
• Commonly used where small, press-fit bumpers have worn, flattened, or fallen off

• One 1/2" x 1/4" rubber bumper

• Press-fit replacement; remove old bumper and press new bumper into the same hole until flush
• No special tools required; use a flat pick or small screwdriver to remove old bumper if needed
• Avoid installing on hot surfaces or near heating elements; let appliance cool before service
• Replace matching bumpers in the same area if others show wear for even performance

Clicking but not lighting? This spark ignitor wire assembly restores reliable ignition on gas cooktops. Moderate DIY repair in 30-45 minutes.

The Spark Module Wire is an OEM part for Viking ranges and cooktops. It is responsible for transmitting the electrical signal from the spark module to the burner igniters, enabling the burners to ignite when the control knob is turned on. This wire is crucial for the proper functioning of the ignition system, ensuring that the gas ignites quickly and efficiently.

Over time, the spark module wire can become worn or damaged due to heat exposure, accidental pinching during maintenance, or normal wear and tear. When the wire is compromised, it can lead to issues with the burner ignition process, affecting the overall performance of the appliance.

Symptoms of a bad spark module wire include:

• Burners not igniting or taking longer to ignite
• Intermittent sparking or no sparking at all
• Clicking sound without ignition

This OEM part is specifically designed for Viking appliances, ensuring compatibility and reliable performance.

41-inch stainless steel flexible gas line for gas ranges. Replace if damaged, kinked, or during installation. Verify length and fitting size match your model.

70-inch stainless steel flexible gas supply tubing for gas ranges. Connects your range to the gas line. Replace if kinked, cracked, or damaged.