Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Seals between crankcase and crankshaft to prevent oil leaks and contamination. Replace if you notice oil pooling or engine performance issues.
Usually ships within 4 - 14 days
Replace your blown cylinder head gasket to stop oil and coolant mixing. Prevents overheating and engine damage. Requires wrenches and screwdrivers.
The breather tube is responsible for filtering out exhaust gases from the crankcase. It has special fibers in the tube to remove contaminants as it moves the exhaust gases through the ventilation valve and out into the air. The tube also helps ensure that the engine air stays cool for optimal performance. This rubber tube can become dry and cracked over time, or it could be damaged due to an incident or impact. In any case, the tube should be fully replaced when it is not functional to ensure optimal performance at all times. This genuine OEM breather tube is manufactured to exact standards and made by Briggs and Stratton. It is compatible with select engines on more than 150 lawn mowers and generators from Toro, Briggs & Stratton, and Lawn Boy. This replacement tube is made of high-quality materials and sold as an individual part. No hardware or other parts are included with the purchase. This part should only be replaced once the engine is cool and all work should be done in a well-ventilated area. A screwdriver and socket set will be required to replace this part.
Crankcase gasket creates an airtight seal to prevent oil and air leaks. Replace when deteriorated from heat and pressure. Confirm fit with model number.
This genuine Midwest Engine screw can be used as a replacement part for a variety of outdoor lawn and garden appliances including lawn mowers, snowblowers, tillers, pressure washers, generators, leaf blowers, edgers, and wood chippers. A screw might have to be replaced within the lifespan of one of these types of outdoor appliances. Tthis is a common occurrence as screws are small components that are easily lost and misplaced. Screws can also loosen over time, necessitating a replacement. If this is the case, the screw should be replaced with this OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, Simplicity, and MasterCut.
Lower oil seal prevents engine oil leaks in small lawn and garden engines. Replace if you notice oil pooling or reduced performance. Verify fit with your engine model number.
Engine won't restart after hitting an object? A sheared flywheel key is often the cause. This small part keeps the flywheel connected to the crankshaft.
Mounting screw for washers. Secures internal components and panels. Replace if stripped, missing, or damaged during repairs or maintenance.
Fix engine knocking or loss of power with this piston pin lock. Secures the piston pin in small engines. Essential for proper piston assembly.
This screw is a genuine Midwest Engine replacement part for small engine appliances, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to tightly link materials together through rotation that pierces into the material. A screw might have to be replaced in the event that it is lost or misplaced, a common occurrence due to its size. A screw might also be replaced if it deteriorates over time, through erosion, cracking, or piercing, thereby reducing its efficacy in holding materials together. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately, as the materials held together by the screw must continue to be held together. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: Briggs & Stratton, Toro, Cub Cadet, and Lawn Boy.
Replace a worn valve retainer if your engine has compression loss or valve train noise. This washer-shaped part secures the valve spring lock on the valve.
This is a replacement fan cover that protects the refrigerator's evaporator/condenser fan assembly and helps direct airflow for efficient cooling. It restores the fan area to proper form and prevents contact with moving parts. What it does:
The intake manifold is designed to manage the combustion mixture of an engine. If it is part of a direct injection engine, it manages the air alone. The cylinder heads of the engine each have an air intake port that allow proper amounts of air, fuel, and spark to make the most of an engine's performance and efficiency. When a small motor operates poorly, it could be that the intake manifold needs replacement. This OEM replacement intake manifold works with small engine machines, lawn mowers, snowblowers, pressure washers, generators, wood chippers, and pressure washers. It works with many brands, including Briggs & Stratton, Toro, Cub Cadet, Lawn Boy, and many more. Replacing the intake manifold varies by machine and model. This kit ships individually.
Replace a frayed or broken starter rope that prevents your lawn mower engine from starting. Simple DIY repair that restores pull-start function.
Replacement mounting screw for lawn and garden engines. Secures components together during operation. Replace if stripped, missing, or damaged.
Flange screw for lawn and garden engines. Distributes connection force over a larger area. Replace if threads are stripped, head is damaged, or screw is missing.
Fix poor engine performance and hard starting with this carburetor overhaul kit. Restores proper fuel mixture for lawn mower and trimmer engines.
Fix a flooded carburetor with this float. Controls fuel flow to the carburetor bowl, preventing flooding and ensuring proper air-fuel mixture.
Seals air cleaner base to carburetor, preventing debris bypass and air leaks. Replace when worn to maintain proper fuel mixture and engine performance.
Mower won't start or runs poorly? Cracked or leaking fuel lines prevent proper fuel delivery. Simple 15-minute DIY repair restores engine performance.
The bell crank link is a genuine OEM replacement part designed for use with certain small engines in lawn and garden equipment. Also commonly used in automotive engines, this metal link is used to connect the throttle to the carburetor and assist in controlling the speed of the engine. Over time, the link can become worn or break entirely with regular use, since it is exposed to constant vibrations and repetitive motion. When the link breaks or malfunctions, the engine will not run properly and there will be no throttle control. That requires a full replacement, which is easier than attempting a repair on a bell crank link. This genuine bell crank link is manufactured by Briggs & Stratton and designed for use on hundreds of engines for lawn and garden equipment. It can be used on lawn tractors, mowers, and other compatible units. The item is made from premium metal and requires a wrench, pliers, and a hex key to replace. Be sure the engine is cool and wear gloves during repairs to protect the hands. This unit is sold as a single item and does not include any additional components or hardware.
Engine racing or won't maintain steady speed? This governor spring controls fuel flow and throttle tension. Common fix for acceleration issues. DIY repair.
Sealing washer creates a leak-proof seal in your lawn and garden engine. Replace when worn or cracked to prevent oil or fuel leaks. Confirm fit.
Metal mounting screw for lawn and garden engines. Secures components together throughout the equipment. Replace when stripped, rusted, or missing.
Engine won't start or runs rough? A worn spark plug prevents proper ignition. Test with a multimeter and replace to restore reliable starting and performance.
Engine won't start? A worn pawl friction plate in the starter assembly prevents cranking. This small engine part transfers power to the starter cup.
Secures engine components on gas line trimmers. Replace this mounting nut if it's stripped, corroded, missing, or no longer holds parts firmly in place.
Replacement screw that secures the pawl friction plate in lawn and garden engines. Replaces lost, stripped, or damaged flange bolts on the recoil assembly.
Seals the intake manifold to maintain proper pressure in your engine. Replace if cracked, worn, or causing air leaks. Verify fit with your model number.
Engine won't shut off when you turn the key? Replace your lawn mower's stop switch to restore safe engine control. Simple safety repair.
Replace your engine's choke and throttle shaft seal to prevent air leaks and maintain proper engine performance. Verify fit with your model number.
Engine won't start or runs rough? A cracked or missing spark plug boot causes misfiring and prevents proper ignition. Easy DIY replacement part.
Fix a stretched or broken starter rope spring with this friction spring. Prevents pulley damage and overstretching. Fits small engines on snow throwers, pressure washers, and generators. Easy DIY repair.
If your small engine won't start or has no spark, a faulty spark plug terminal may be the cause. This terminal connects the ignition coil to the plug.
This exhaust gasket is a genuine Midwest Engine replacement part for appliances operated by small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. An exhaust gasket's purpose in the engine is to create a sealed layer between the carburetor and the exhaust tube to keep dirt and debris out of the infrastructure of the engine. A malfunctioning or broken exhaust gasket could compromise the seal between the carburetor and the exhaust tube, meaning that dirt and debris could get into the engine and cause damage. An exhaust gasket could be subject to damage from overuse and is generally known to require replacement over time from general wear and tear. If the exhaust gasket seal is compromised, it should be replaced immediately. Evidence of dirt and debris compromising an engine could take the form of oil leaking from the carburetor, black smoke pluming from the exhaust tube, and lower engine pressure than usual. This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, and Toro. This part sold individually.
This spring brake is a genuine Midwest Engine part that can be used as a replacement part for outdoor appliances with small engines, including lawn mowers, chipper shredders, snowblowers, and other such appliances. Spring brakes are a braking system employed a large, coiled spring that is kept under high tension; the control valves attached to the spring brake are the mechanism by which the spring brake is released.If the spring brake has been damaged, is malfunctioning, or is in a state of disrepair, this will manifest in the form of a sudden, volatile eruption from the air brake chamber. This is a dangerous state for a small engine, so repair should be conducted immediately. Additionally, a new spring brake part should be ordered before any attempt to use the appliance without a proper repair. Remember to always wear gloves when handling, repairing, and operating outdoor equipment, and stay safe around the small engine of the appliance if the spring brake has malfunctioned and caused a dangerous situation.This spring brake is compatible with the brands Briggs and Stratton, Cub Cadet, and Toro.
This is a genuine OEM replacement air cleaner primer base for select Briggs & Stratton engines. The air cleaner base is installed on the engine to secure the air filter, which cleans debris from the air as it goes into the engine. Along with the cover, the air cleaner base provides a secure location and protection from the elements. Over time or during the course of other repairs, the base may become cracked or damaged, which could affect the operation of the air filter and the engine performance overall. This needs replaced as soon as possible to prevent further damage. This OEM air cleaner base is compatible with select engines manufactured by Briggs & Stratton, including those found on generators and lawn mowers. There are more than 150 machines that use this part from Toro, Simplicity, and Briggs & Stratton. This air cleaner primer base assembly includes the primer bulb and is sold as an individual unit. Allow the engine to cool completely and wear gloves when doing engine repairs.
This OEM air cleaner cover from Briggs & Stratton fits over the air cleaner and filter system, protecting the filters from excess dirt, debris, and other potential damage. This cover is also designed to help hold the air filter in place. The plastic housing is durable, but it can be subject to damage over time. This replacement is a snap-on cover, so no tools are required. Be sure to wear gloves when performing any kind of work on lawn and garden equipment. This air cleaner cover is designed to work with multiple types of lawn and garden equipment from Briggs & Stratton, Lawn-Boy, and Toro. It works with various engines on generators and lawnmowers, including hundreds of different specific models. It is sold individually and does not include the actual air filter or the bottom part of the housing.
This genuine Midwest Enginescrew can be used as a replacement part for appliances operated by small engines, including lawn tractors, lawnmowers, snowblowers, leaf blowers, vacuums, tillers, and pressure washers. The function of a screw on a small engine appliance is to fasten materials together through rotating such that the screw pierces into the materials to attach them. There are several reasons why a screw might have to be replaced. As they are a small part, screws might have to be replaced if they are lost or misplaced. These misplacements are a common occurrence for owners of small engine appliances while they do repairs. Additionally, screws may suffer damage over time in the form of rusting, stripping, erosion, or other deterioration and should be replaced if the damage hampers their ability to keep materials fastened to each other. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This OEM screw is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Snapper. This part is sold individually.
Fix engine misfires and stalling issues with a new carburetor float bowl. Controls fuel flow from tank to motor. Direct fit for Briggs & Stratton models.
This authentic replacement item is a user's repair manual for Briggs & Stratton appliance engines. Whenever an operator has a problem with their appliance's engine, it's standard that they check the user's manual. It includes step-by-step directions for how to diagnose and then repair faulty parts. Many appliances use the same type of engine, so this manual is compatible with a wide variety of Briggs & Stratton products. It can also be used with some Toro and Lawn Boy engines as well. This product is sourced from the original manufacturer and ships individually. Any parts needed to make the repairs included in this manual will have to be purchased separately.