Ge WB2X2058 Gasket OEM Part

The seal came with no clips, as video of repair showed. Also no instructions with part. After pondering the sisuation, found screw in both side of oven wall in front of oven and a clip at the top of the oven, held with screws. Took all the screws out, used a screw driver to move side and top wall enough to remove the old seal. Needle noose pliers very helpful in this process. start seal replace at top corner of oven. Easily done in less than 10 minutes, now that I know the above.

I have had this oven for 40+ years. It is an enamel oven, something that you can no longer buy. Because I did not wish to buy new, I decided to service it myself and searched for the parts I needed. AppliancePartsPros.com was the only site to offer all three parts, so many having been discontinued by other providers. I replaced the oven gasket, the broiler element & the lens without any difficulty. I have replaced the bake element previously as well. I am very grateful that I was able to keep my oven, thanks to AppliancePartsPros.com.

Removed a total of 4 screws, one on each side of the oven wall near front and 2 in a clip at top of oven. After removing screws use a screw driver to slide oven wall out; remove old gasket. Install new gasket. The tricky part was to determine exactly the orientation of the gasket before pushing the oven wall back in place. The narrow part of the gasket must be inserted in the gap between the inner and outer walls. Use a screw driver to help position the gasket as up push the oven wall back in place. Replace all screws and the installation is complete.

Just removed the old one and put on the new. it fit perfectly.

Replaced element & gasket