Parts for Echo SRM-2100SB: Gear Housing / Shield / Tools Parts

This is a cylinder head gasket that is located between the cylinder head and the engine block on lawn and garden equipment. This gasket is responsible for sealing in the internal combustion process. It also prevents oil and coolant from mixing as they move from the engine block to the cylinder head. Some signs that a new cylinder head gasket may be needed include fouled spark plugs, leaking coolant, white smoke, an overheating engine, and milky white oil. As time goes on, gaskets can deteriorate and may crack, which means a replacement is required. Some of the tools that may be needed include a nut driver, socket driver, spark plug wrench, hex bit, screwdriver, Torx screwdriver, torque wrench, and a gauge. This is an expert replacement that requires a great deal of mechanical knowledge. First, get access to the head gasket and check it for flatness. Prepare the surface, remove the old head gasket, and install the new one. This is a genuine OEM component provided directly from the manufacturer. It is designed to be used in Echo, Little Wonder, and Mantis tillers, pole pruners, string trimmers, hedge trimmers, leaf blowers, and edgers. This component is sold individually.

This is a ball bearing that is made out of durable metal and used in a variety of lawn and garden equipment types. It fits in between a washer and a spacer in a tool to prevent excessive heat and friction between different components. The ball bearing takes the load and spins to help distribute weight while preventing friction so the tool runs at its best. When the ball or bearing retainer wears out, it can cause issues with the gardening tool. If it is located in a wheel, it can make it hard to turn.Wear is constant on ball bearings whenever a tool is in use, which means they over time they will start to experience issues and can wear out. Pressure, heat, vibration, and friction will take a toll over time. It's important to maintain the ball bearings and replace them whenever needed. This ball bearing is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. The part is designed for use with string trimmers, hedge trimmers, chainsaws, tillers, and pole pruners made by Echo, Little Wonder, Mantis, and Shindaiwa.

The intake gasket is designed to act as a seal between the cylinder head and the heat dam. It keeps the engine sealed and protected during use. Not only does this reduce the risk of damage to the engine on various lawn equipment units, but it eliminates potential leaks that could reduce engine power or performance and ensures maximum flow to the engine. Gaskets can become worn or damaged over time with regular use or they can break unexpectedly. This Echo gasket is made from compound material that is durable and designed to withstand the high heat inside of an engine. Use it to replace the gasket in compatible lawn equipment. This gasket is an OEM part that is designed to fit many Echo and Little Wonder lawn and garden equipment engines. There are more than 150 compatible models in total, including blowers, pumps, reciprocating saws, cultivators, edgers, and other saws. Check your user manual for compatibility and to see if there are any special replacement instructions to consider.

This part is a genuine replacement for Echo exhaust gaskets on select lawn and garden machines. It creates a seal between the exhaust shield and exhaust pipe. Gaskets are exposed to high temperatures and constant pressure, so they may wear down over time. They can deteriorate or become compressed, which affects the quality of the seal that they create. This could impact the engine performance in various ways. Replacing the gasket is generally the best solution. This OEM exhaust gasket is compatible with a variety of machines from Echo and Little Wonder, including blowers, pruners, cultivators, pups, drills, and reciprocating saws. Replacing gaskets requires the use of multiple tools. Gloves should be worn for hand protection and the engine should always be cool before any repairs are done. This durable gasket meets all EPA requirements and is made from durable composite material. It is sold as an individual item and those who need additional gaskets will have to purchase multiple quantities.

The muffler gasket here is a replacement for use in various types of handheld outdoor equipment. The gasket will provide an airtight seal between the muffler and the exhaust guide on the equipment. Over time, the muffler gaskets could start to shrink and to become brittle. A bad muffler gasket could cause a noisier engine or a loss of power if air is getting into the engine. They may also crack. Any of these issues would require the gasket to be replaced. This is a genuine OEM replacement muffler gasket. It is made from durable material and is sold individually. It can work with many types of lawn and garden equipment including tillers, string trimmers, leaf blowers, edgers, pole pruners, and hedge trimmers. Brands that are compatible with the gasket include Mantis, Little Wonder, and Echo.

This is a genuine OEM replacement screw with attached washers sourced directly from the manufacturer. It is used in many different backpack blowers, edgers, and trimmers to attach components together. It can be used to attach the handle to the unit, for example. The attached washers are used to help distribute the load of the threaded fastener. These replacement screws are 5 x 2 Phillips head machine screws. The holes for these screws must be pre-drilled; these are not self-tapping. During scheduled maintenance, all screws should be inspected for rust and corrosion. Clean the screws if it is hard to determine if it is rusted or dirty. The screw's fit should also be checked. Regular use may have caused it to loosen. Tighten all loose screws with a Phillips head screwdriver. If there are any screws that have rusted, remove them with the Phillips head screwdriver and install new ones. Tighten the screw without overtightening, as this can strip the screw and cause the screw not to fit correctly. This screw is made from high-quality metal and sold individually with the washers attached to it. It is compatible with hedge trimmers, trimmers, chainsaws, leaf blowers, and pole saws manufactured by Shindaiwa, Echo, and other companies.

The bolt is a common piece of hardware that is used with many different types of equipment, including handheld lawn and garden machines. The bolt has a range of applications in various models. Typically, bolts are used to help fasten parts of the machine together. They can provide a strong hold when coupled with washers and nuts, for example. When used properly, the bolts will also help to reduce the amount of vibration in a machine.Bolts could need to be replaced for any number of reasons. In some cases, they might be lost. The threads could become worn down, or the edges of the bolt head could be worn away. The metal bold is durable and will require a wrench for replacement.The bolt can be used in various types of machines including trimmers and edgers from Echo and Shindaiwa. The bolt is made from high-quality metal and is sold individually. It is a genuine OEM part that has been sourced from the manufacturer.

This screw attaches to the case-starter in certain types of lawn and garden equipment. The purpose of a screw is to hold the equipment together, keeping everything intact and in the correct location. If the screw becomes stripped or broken, it should be replaced immediately before continued use of the machine. The replacement process for the screw is very straightforward and will only require a Phillips screwdriver for the removal of the faulty screw (if necessary) and the installation of the screw.This 5 x 16 screw is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this 5 x 16 screw is Echo. It designed for use with outdoor lawn and garden machines and equipment such as trimmers, hedge trimmers, engines, backpack blowers, brush cutters, lawn mowers, string trimmers, leaf blowers, and chainsaws. This screw is compatible with products made by Echo.

The manufacturers of Echo, Shindaiwa, and Little Wonder tools use this #5 nut at various points in more than 150 gasoline powered tools. Included among them are hedge trimmers, power saws, pruners, grass trimmers, edgers, leaf blowers, and chainsaws. The #5 nut is a lock nut, one that does not need a lock washer to prevent it from coming loose when it is used to bolt one piece of metal to another. Each of these devices has an engine housing and metal superstructures that call for metal parts to be joined together, which is were the #5 nut comes into play. As it is a small piece, and because it is used in so many places and for so many reasons, #5 nuts are often lost. Occasionally they are not tightly fastened after a repair. More often, they are simply set aside and forgotten. For this reason, it is a good idea for users to purchase several of these hardware pieces at a time. Like all our other products, this #5 nut is an OEM genuine replacement part. This means the original manufacturer machined this part or that it was built according the same specifications as the original so as to be a perfect match.