Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
The Drain Pump is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine, preventing water from remaining in the tub after a wash cycle, which is crucial for the appliance's proper operation and the cleanliness of your laundry.
You should replace the drain pump if it becomes faulty or stops working. Common causes of a bad drain pump include blockages from debris or lint, wear and tear over time, or electrical malfunctions. These issues can prevent the pump from effectively draining water.
Symptoms of a bad drain pump include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.
The Internal Drain Hose is an OEM replacement part for Whirlpool washing machines. It routes used wash water from the tub to an external drain source.
Causes of a faulty internal drain hose can include cracks developing from constant use or obstructions blocking effective drainage.
Symptoms of a bad internal drain hose include:
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
The Gearcase is an OEM part for Whirlpool washing machines. It houses key transmission components such as gears, shafts, and pulleys that work together to propel the wash basket and spin it during the cycle. As a result, it plays a crucial role in agitating clothes to wash and spin water out of them.
Causes of a bad gearcase can include wear and tear of internal parts over time and prolonged use, gear cracking or sheering, lubrication issues, or seal leaks.
Symptoms of a bad gearcase include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replace yours today to keep your washer running smoothly.
This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does
The Drive Motor is an OEM part for Whirlpool washing machines. The drive motor is responsible for powering the agitator or impeller as well as drum rotation during all cycles. It converts electrical energy into mechanical motion needed for washing and spinning laundry.
Causes of a bad drive motor can include failure to start, inconsistent speeds or intermittent operation which are tell-tale signs of normal wear and tear over time.
Symptoms of a failed drive motor include:
This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
The Belt is an OEM part for Whirlpool washing machines. It is a crucial transmission component that connects the motor to the drive system transmitting power to the tub. During rotation, the belt spins the tub and agitates or extracts water as needed.
Causes of a bad belt include general wear and tear over time, exposure to abrasive debris, or damage due to seizing components.
Symptoms of a failed or slipping belt include:
Replacing with a new OEM belt restores lost power ensuring efficient, balanced operation. Extend the life of your washer with this genuine Whirlpool part.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
The Actuator is an OEM part for Whirlpool washing machines. This component plays a crucial role in engaging the washer's gear case, enabling the transition between the agitation and spin cycles during a wash. The actuator ensures that the washer drum operates correctly by controlling these mechanical movements.
Over time, the actuator can wear out or fail due to continuous use, mechanical stress, or electrical issues. Replacing a faulty actuator is essential to maintain the proper functioning of the washing machine.
Symptoms of a bad actuator include:
This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:
The Capacitor is an OEM part for Whirlpool washers. It is responsible for starting the motor and keeping it running smoothly during the washing cycle. It stores electrical energy and delivers it to the motor when needed, providing the necessary power for the washer to function properly.
A bad washer capacitor can occur due to electrical malfunctions, wear and tear, or damage to the capacitor itself. If you notice symptoms such as the washer not starting or spinning, the motor making unusual noises, or the washer not completing cycles, it may be time to replace the washer capacitor.
Symptoms of a bad washer capacitor include:
Repair your washer by replacing the faulty or worn-out washer capacitor with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This pulley cover encloses the drive belt and motor pulley at the base of the appliance. It protects moving parts from debris and contact, helping reduce noise and wear when the original cover is cracked, warped, or missing.
The Drive Clutch Kit is an OEM replacement part for Whirlpool washing machines. As an integral transmission component, it includes the clutch that engages the drive motor to rotate the central agitator or impeller.
Causes of a bad clutch kit include worn parts that have aged from repeated use. Signs include slipping, grinding, or clicking noises from the transmission area.
Symptoms of a faulty clutch kit are:
This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.