Parts for Craftsman 12A-A2BR799 / 2014: General Assembly Parts

This is a genuine replacement bail bar that is designed for walk-behind lawn mowers. The bail bar is installed on the upper handle. The bar is engaged before the starter rope is pulled, allowing the engine to operate. This bar is responsible for stopping the mower's operation when released. Due to the repetitive motion and exposure to the elements, this bar can become worn or damaged and require a replacement. This part is also known as the blade control because it controls the engine power and blade rotation simultaneously. If the bail bar is broken or damaged, the engine and blade will not be able to stay engaged. A replacement will be necessary to continue using the mower. This OEM replacement bail bar is manufactured by MTD and designed to serve as an identical part replacement as what came with the machine. This metal handle is durable and sold as an individual unit. Additional parts and hardware will require a separate purchase. The part can be used with more than 150 models of lawn mowers from MTD, Bolens, Huskee, Yard Machines, and Yard Man. Always watch for pinch injuries when replacing pressure-held parts like this bail bar and wear gloves for hand protection.

This is a replacement handle. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken, detached, or defective handle on various lawn mower models.A broken or detached handle can make operating and handling a lawnmower difficult and potentially dangerous. Over time, handles can become subject to significant amounts of wear and tear which can cause them to loosen or break. Proper tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this handle, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this handle is suitable for use on several different models of lawnmowers manufactured by MTD and Craftsman. This part may fit equipment made by other manufacturers. For proper accuracy when checking a part, please check the specific model number. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This is a genuine replacement lower handle part. The lower handle is used on push lawn mowers. This handle connects the upper handle to the mower. This part should be replaced when there is damage to the bolt holes or if it is bent. It is not easily worn, and therefore does not have to be replaced often.To replace this part, a 7/16th inch wrench or a 9/16th inch socket wrench is needed. Remove the upper shoulder bolt to detach the upper handle. Remove the lower handle and place the new replacement part. Bolt the upper handle to the lower handle. On occasion, the bolt connecting the handles may need replacement if worn. Any new bolts will need to be purchased separately. Otherwise, previous bolts used on the worn lower handle can be reused. If the part is bent, replacement may require a mallet to dislodge or remove the damaged part. This is a genuine MTD replacement part. This part is compatible with most lawn mowers. This part is sold separately.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

A rope guide eyebolt is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers. It is compatible with products by brands such as Craftsman, Bolens, Husky, Yard Machines, Yard Man, MTD, and Troy-Bilt.The rope guide eyebolt part plays a valuable role in making the lawn mower easier to operate. The metal rope guide eyebolt is to be mounted to the side rail of the handle, which then keeps it secured with a handle knob. The rope guide eyebolt keeps the starter rope on the upper handle for ease of access. The purpose of all of this is simply to keep the rope out of the way while operating. The replacement or repair process of the rope guide eyebolt should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes.The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This part is made out of metal. This rope guide eyebolt is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This is a genuine replacement part designed for select lawn mowers and snowblowers. The carriage screw is responsible for securing various components on lawn tractors and snowblowers and has multiple locations and applications on different models. There is a square piece under the head that will fit into a square hole to secure the screw so that the nut can be tightened. This screw can become damaged over time or the threads can wear down with regular use. In some cases, these small screws are lost in the process of performing other repairs. A replacement with this genuine OEM carriage screw can get equipment back in working order. This OEM replacement screw is manufactured to exact standards by MTD. It can be used on hundreds of lawn mowers and snowblowers, including those from MTD, Craftsman, Yard Man, Troy-Bilt, Bolens, Yard Machines, Husky, and Cub Cadet. Since this part has multiple applications, users should refer to parts diagrams for exact location and replacement procedure. This durable screw is made of high-quality metal and sold as an individual unit. Those who need more than one will have to purchase multiple quantities.

A star knob connects the upper and lower handles on an outdoor appliance, and if removed, the upper and lower handles are quick-released. This part is made of black heavy-duty black plastic, and the threads are made of steel. Over time, the threading can become worn out, making the connection loose, and causing the two handles to no longer stay in place. Star knobs are a straightforward repair that can be done in a matter of minutes. Just unscrew the original, damaged knob and screw in the new knob. The knob is designed to be unscrewed by hand, so there is no need for additional tools to make this repair. This genuine OEM replacement part is designed for a variety of outdoor appliances, including lawnmowers, edgers, chippers, tractors, trimmers, and cultivators. This star knob is compatible with Yard Machines, Yard-Man, Cub Cadet, Bolens, Craftsmen, and Ryobi products. This part ships individually.

A side discharge chute is engineered to move the debris away from the machine's underside. This is because grass that is not only long and thick but also moist can get trapped and clog the deck and the blades. When this happens, you will have to stop to clear the accumulated clippings periodically. To mitigate clogging and maximize cutting, using a side discharge chute is ideal. When a side discharge chute is installed, but clogging still occurs, there might be a problem with the chute itself. It can be torn or already loose. Luckily, installing a brand-new side discharge chute is easy and will take less than 5 minutes. Start the installation by removing the spark plug. The engine should be cool to the touch. Then, lift and hold the mulch cover up. Take the brand-new side discharge chute and hook the tabs on to the hinge pins. Then, release the mulch cover. MTD manufactures this brand-new side discharge chute. It is an original replacement with Craftsman, MTD, Murray, Yard-Man, Yard Machines, Bolens, Huskee, and Mastercut lawnmowers. It comes in solid plastic material with a black finish. This side chute is sold individually.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This is a replacement front axle assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broke, damaged, or malfunctioning front axle assembly on a variety of different lawnmower models. The front axle attaches to the front wheels of the lawnmower and helps transfer power from the transmission to the wheels to drive it forward. The axle is essential to proper functionality and should be replaced if damaged. Access to proper tools is required to install this part, including a flat-head screwdriver and a nut driver. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this front axle assembly, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this front axle assembly is suitable for use on several different lawnmower models manufactured by MTD, Yard Man, Yard Machines, Cub Cadet, Troy-Bilt, and Husky. This is a genuine part made of high-quality, durable materials and is sold individually.

This chute deflector bracket is a genuine MTD part, sold individually. This chute deflector bracket can be used as a replacement part for a lawn mower. The purpose of the chute deflector bracket is to secure the placement of the chute deflector, which protects the operator of the lawn mower from flying external materials flung up by the appliance, including dirt, debris, and pebbles. The chute deflector bracket might have to be replaced in the event that it can no longer serve its vital function of maintaining the secure placement of the chute deflector of a lawn mower. This could occur if the component is coming loose. If this is the case, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This chute deflector bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This is a replacement lawn mower wheel that can be used with select walk-behind lawn mowers. The lawn mower wheel helps keep the deck off of the ground and provide an easy way to maneuver the machine. Wheels are made of durable plastic, but they can wear or become dented or otherwise damaged from impacts with rocks and stumps, or even just with regular use. A broken, crooked, or otherwise damaged wheel is going to affect the ability to maneuver the mower. In some cases, it may prevent operation completely. Replacing the wheel with a genuine part like this will resolve the issue. This OEM lawn mower wheel is manufactured by MTD. It can be used with lawn mowers from MTD, Craftsman, Huskee, Yard Machines, and Yard Man. The wheel is made of durable plastic and attaches to the axle on the lawn mower. This unit is just the wheel and the hardware required to secure it will be sold separately. Those who need multiple wheels will have to purchase additional quantities. Always be sure to disconnect the spark plug before working on the deck of the lawn mower and wear gloves for hand safety.

This part is a replacement rear discharge chute assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current rear discharge chute assembly is broken or ineffective, this part can be used for repair or replacement. It is intended for use with a variety of lawn mower models.The rear discharge chute assembly ensures that grass clippings are transported from the deck to the mower's grass collection bag. This part may become worn or broken over time or with regular equipment usage and will thus require replacement with a genuine OEM part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this rear discharge chute assembly, the appropriate owner's manual and equipment diagrams should be referred to. This rear discharge chute assembly is suitable for use on a variety of lawn mower models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This replacement part is a screw. This is a genuine replacement part made by MTD. A screw is a small part but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts in place and secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear or an isolated incident. Screws endure friction over time and can become worn down.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

This replacement part is a baffle assembly kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This baffle kit is made for different kinds of lawn mowers and helps to enhance the air flow underneath the mowing deck during use. Once installed, the baffle assembly allows grass clippings and other debris to be better directed into the bag or discharge chute. A new baffle assembly kit might be needed if the air flow underneath the deck of the lawn mower is not working as properly as during prior uses. This can be because the baffle kit is not working properly and air flow is not distributed as well as before. This part should require only common household tools and will most likely be an easy repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.

This replacement part is a hex bolt. It is a genuine replacement part made by MTD. Hex bolts are named because they are shaped like a hexagon and are different from the regular circle-shaped bolts. These parts are able to hold other parts secure and in place so that everything can operate as needed. A new hex bolt might be needed if the current ones are damaged in any way. It is possible that these bolts become stripped or lodged in place over time due to normal wear and tear and should be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous part is stuck. Be sure the engine is completely powered down before beginning this repair. This bolt is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This is a shoulder screw that is used to secure the handles of yard equipment. Typically, this screw is used with a matching wing nut, which is sold separately. Many different varieties of push lawn mowers have handles that fold downward for ease of storage. This is one of the locations on a mower where one will find shoulder bolts and the point at which these bolts are most likely wear out. While they are made of durable machined metal, shoulder bolts receive a great deal of wear, particularly from the handles being raised and lowered each time the mower is used. When pushing down on the mower to clear wet grass clippings or to make sharp turns with the mower, the entire weight of the mower is put on the two shoulder screws where they intersect. Since the metal of the handles can turn at that juncture, extra shearing action is put on the shoulder bolts, which can wear out. It is actually advantageous that the bolts wear out since otherwise, the handles themselves would warp and break apart. These OEM genuine replacement parts fit a number of different lawn and garden machines, including many made by Cub Cadets, Husky, Troy-Bilt, Craftsman, Yard-Man, Bolens, MTD, and Yard-Machines.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

The blade support is found between the blade and the bolt. As its name suggests, it is designed to provide support for the blade to ensure it is secured to the base of the mower deck. It is made of metal and it will need a replacement if it becomes worn or damaged. To replace a blade support or blade spacer, first, the engine needs to be cool. Remove the wire and boot from the spark plug. Tip the mower back on its handle assembly and use a piece of wood or sturdy object to hold the cutting blade in place. Remove the old blade support and blade. When installing the new one, ensure that the blade's sharp edge faces away from the mower deck. Re-thread and torque the bolt between 40 and 50 ft-lbs. This is an original OEM replacement part for lawnmower blade support made by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, MasterCut. It is sold individually.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This is a replacement wheel. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or faulty wheel on a variety of lawnmower models. This particular part is an 8 x 1.8 rear wheel Wheels can easily become damaged or broken with regular equipment use. When worn out, a wheel should be replaced in order to continue using the lawnmower safely. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this wheel, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this wheel is suitable for use on several different lawnmower models manufactured by MTD, Bolen, Yard Man, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

Designed for comfortable mowing, this trail shield attaches to walk-behind lawnmowers. It secures to the back of the deck on the lawnmower and prevents grass and other debris from reaching the person using the mower. This trail shield is made of durable plastic but can become damaged use. If it is broken, it will not be able to keep grass from collecting behind the mower deck, so it will need to be replaced.To replace the part with a new shield, put the lawnmower on a stable surface and ensure it is powered off. On the original trail shield, find the metal clasps that hold it secure. Unclasp each of these and remove the trail shield from the lawnmower. The new replacement part can be attached and the lawnmower will operate correctly.This trail shield is an authentic OEM replacement part that is directly sourced from the manufacturer. It is an individual component and does not come with hardware. The part is compatible with lawnmowers by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, Huskee, Murray, MTC, and Yard Machines.

This part is a replacement front cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or defective front cover in a variety of lawnmower models.The front cover is designed to protect the equipment's drive components and transmission from damage due to dirt or debris, which can damage the engine and transmission and prevent proper functionality. To stop this occurring, the front cover should be replaced if cracked, worn, broken, or missing. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. For more accurate information on how and where to install this front cover, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this front cover is suitable for use on several different models of lawnmowers manufactured by MTD, Yard Man, Yard Machines, and Husky. This is a genuine part made of high-quality, durable plastic and is sold individually.

This grass catcher bag is a genuine OEM factory-built replacement part. This is the fabric container into which grass discharges as it is ejected from beneath the mowing deck so it can be discarded or composted. If your current bag is torn or does not fit closely against the mower housing, the bag should be replaced. Replacing the bag is a simple proposition. After removing the original bag from the metal frame and discarding it, make certain that the replacement bag is right side out with the plastic side on the bottom. In pulling the bag over the frame, make certain that the fit is snug and that it fits without bowing the frame or being excessively loose. Next, notice there is a channel on the bag. It fits over the hooks on the frame. Once this is completed, simply lift the rear discharge door of the mower and slide the grass catcher into place. This grass catcher fits most Craftsman and MTD walk-behind lawnmowers. This OEM part is sold individually.

This replacement part is a drive control bar intended for use in different lawn mowers. This is a genuine replacement part made by MTD. Drive control bars are used to pull the cable drive and engage the engine. The drive bar is situated at the top of the mowing handle so that it is easily accessible to the user. A new drive control bar might be needed if the current one is damaged or broken in any way. It is common for this part to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This part is a replacement drive cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or malfunctioning drive cable in a variety of different lawnmower models.The drive cable is important for proper equipment control, as it stops the engine when the operator presence handle is released. Over time, drive cables can become stretched, worn, broken, or detached, which can be dangerous and thus they should be immediately replaced. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this drive cable, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this drive cable is suitable for use on several different models of lawnmowers manufactured by MTD, Yard Man, Yard Machines, Troy-Bilt, and Husky. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement sphere bearing assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a worn out, damaged, or defective sphere bearing in a variety of outdoor power equipment.Sphere bearings have a variety of uses. They are particularly useful for equipment with a high load capacity that also requires high tolerance and self-aligning ability. They can be found in a wheel assembly, transmissions, or other machinery parts. Sphere bearings are subject to significant wear and tear, requiring replacement. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this sphere bearing assembly, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this sphere bearing assembly is suitable for use on several different models of small engine outdoor power equipment manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, Bolens, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This dowel pin is a genuine MTD part, sold individually. A dowel pin can be used as a replacement part in a lawn mower. This genuine OEM part is a fastening component that operates within the internal or external machinery of a lawn mower, and it is made out of durable, high quality metal material.If damaged, the dowel pin should be removed and replaced by this genuine OEM replacement part. The dowel pin is a small fastening component that can also be easily lost or misplaced, necessitating a complete replacement as well. This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This dowel pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Yard Man, Yard Machines, Huskee, and MasterCut.

This spur gear is a genuine MTD part, sold individually. This spur gear can be used as a replacement part for a lawn mower. The purpose of a spur gear is to facilitate and transfer the rotation and power of the torque so the appliance can be operated over a variety of surfaces and controlled by the operator.If the teeth of the spur gear or the entire component is cracked, punctured, scraped, or warped to the point that it cannot transfer rotational power, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spur gear is compatible with the following outdoor appliance brands: MTD and Craftsman.

This part is a replacement transmission tension spring pin. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current spring pin is defective, this part can be used as a replacement. It is intended for use with a variety of lawn mower models.This spring pin is critical as it securely fastens the transmission to the mower's front deck tray. This part will need to be replaced if lost, broken, or otherwise ineffective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this transmission tension spring pin, the appropriate owner's manual and equipment diagrams should be referred to. This spring pin is suitable for use on a variety of lawn mower models manufactured by MTD, Craftsman, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This replacement part is a lower tray and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A lower tray is found in lawn mowers to help protect the user from any dangerous parts of the lower level of the appliance. A new lower tray might be needed if the current one is visibly damaged or broken including being dented, cracked, snapped, or chipped. It is not unusual for this part to become damaged as it is close to debris during use. Be sure to reference the specific user manual for more detailed instructions on how to replace this part. This repair is fairly easy and should only require common household tools. It is recommended that the user wear work gloves during this repair to minimize injury. This lower tray is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit in many different appliances.

This replacement part is a transmission wire. This is a genuine replacement part made by MTD. This wire allows for the overall functioning of the transmission in many different lawnmowers. A new transmission wire might be needed if the current one is visibly damaged or worn down. After years of normal use is it possible that the wire can become stripped down and need to be replaced. If the transmission in the lawnmower is not working properly, it might be because of a faulty transmission wire. Be sure the engine is completely powered down before attempting to repair this part. Work gloves are recommended when working with wires as they can be dangerous.This transmission wire is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This replacement part is a compression spring. This is a genuine replacement part made by MTD. Springs are found in different types of machinery and are responsible for returning other parts to their original position. On top of this, they are also meant to absorb energy so that the engine can operate smoothly. A new compression spring might be needed if the current one has been stretched out over time or snapped. This can happen as springs are typically put under a lot of pressure during use. If this is the case, be sure to replace it right away. Be sure to wear work gloves during this repair to ensure safety to the user and those around them. This is a genuine OEM replacement part which ensures proper fit. This compression spring is sold individually and is sourced directly from the manufacturer.