Parts for Craftsman 12A-A2BR799 / 2014: .Quick Reference Parts

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This grass catcher bag is a genuine OEM factory-built replacement part. This is the fabric container into which grass discharges as it is ejected from beneath the mowing deck so it can be discarded or composted. If your current bag is torn or does not fit closely against the mower housing, the bag should be replaced. Replacing the bag is a simple proposition. After removing the original bag from the metal frame and discarding it, make certain that the replacement bag is right side out with the plastic side on the bottom. In pulling the bag over the frame, make certain that the fit is snug and that it fits without bowing the frame or being excessively loose. Next, notice there is a channel on the bag. It fits over the hooks on the frame. Once this is completed, simply lift the rear discharge door of the mower and slide the grass catcher into place. This grass catcher fits most Craftsman and MTD walk-behind lawnmowers. This OEM part is sold individually.

This is a Briggs and Stratton air filter for walk behind mowers. It protects the engine from dirt and other debris, keeping equipment running at peak performance. Air filters should be replaced annually at minimum, and should be checked as part of routine maintenance on a mower. A dirty or damaged air filter can potentially cause a host of issues in the mower, from overheating to engine damage. A visual inspection should be enough to tell if the air filter needs to be replaced.To install this part, remove the knobs and cover from the filter's housing. If necessary, remove the foam pre-cleaner, and then the filter, itself. Clean the area of any dirt or debris, then slot the new filter into place. To complete the install, replace the cover.This is a genuine OEM part sourced directly from the manufacturer. It is compatible with mowers from MTD, Troy-Bilt, and Yard Machine. No other hardware is included in this purchase.

This is a replacement wheel. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or faulty wheel on a variety of lawnmower models. This particular part is an 8 x 1.8 rear wheel Wheels can easily become damaged or broken with regular equipment use. When worn out, a wheel should be replaced in order to continue using the lawnmower safely. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this wheel, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this wheel is suitable for use on several different lawnmower models manufactured by MTD, Bolen, Yard Man, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This is a replacement lawn mower wheel that can be used with select walk-behind lawn mowers. The lawn mower wheel helps keep the deck off of the ground and provide an easy way to maneuver the machine. Wheels are made of durable plastic, but they can wear or become dented or otherwise damaged from impacts with rocks and stumps, or even just with regular use. A broken, crooked, or otherwise damaged wheel is going to affect the ability to maneuver the mower. In some cases, it may prevent operation completely. Replacing the wheel with a genuine part like this will resolve the issue. This OEM lawn mower wheel is manufactured by MTD. It can be used with lawn mowers from MTD, Craftsman, Huskee, Yard Machines, and Yard Man. The wheel is made of durable plastic and attaches to the axle on the lawn mower. This unit is just the wheel and the hardware required to secure it will be sold separately. Those who need multiple wheels will have to purchase additional quantities. Always be sure to disconnect the spark plug before working on the deck of the lawn mower and wear gloves for hand safety.

This fuel cap is a genuine MTD a part, sold individually. This fuel cap can be used as a replacement part for lawnmowers. This fuel cap protects the fuel line from accumulating external materials such as dirt, debris, and pebbles while the appliance is in operation. Additionally, the fuel cap prevents fuel from leaking out of the small engine of the lawnmower.The fuel cap might have to be replaced at some point in the standard lifespan if the component suffers damage that prevents it from functioning as a safeguard. Signs of damage include fuel leakages from the area of the fuel cap or the accumulation of external materials inside the engine of the lawnmower. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel cap is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Cub Cadet, Yard Machines, Bolens, and Troy-Bilt.

This part is a replacement drive cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or malfunctioning drive cable in a variety of different lawnmower models.The drive cable is important for proper equipment control, as it stops the engine when the operator presence handle is released. Over time, drive cables can become stretched, worn, broken, or detached, which can be dangerous and thus they should be immediately replaced. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this drive cable, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this drive cable is suitable for use on several different models of lawnmowers manufactured by MTD, Yard Man, Yard Machines, Troy-Bilt, and Husky. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

Designed for comfortable mowing, this trail shield attaches to walk-behind lawnmowers. It secures to the back of the deck on the lawnmower and prevents grass and other debris from reaching the person using the mower. This trail shield is made of durable plastic but can become damaged use. If it is broken, it will not be able to keep grass from collecting behind the mower deck, so it will need to be replaced.To replace the part with a new shield, put the lawnmower on a stable surface and ensure it is powered off. On the original trail shield, find the metal clasps that hold it secure. Unclasp each of these and remove the trail shield from the lawnmower. The new replacement part can be attached and the lawnmower will operate correctly.This trail shield is an authentic OEM replacement part that is directly sourced from the manufacturer. It is an individual component and does not come with hardware. The part is compatible with lawnmowers by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, Huskee, Murray, MTC, and Yard Machines.

This replacement part is a hex bolt. It is a genuine replacement part made by MTD. Hex bolts are named because they are shaped like a hexagon and are different from the regular circle-shaped bolts. These parts are able to hold other parts secure and in place so that everything can operate as needed. A new hex bolt might be needed if the current ones are damaged in any way. It is possible that these bolts become stripped or lodged in place over time due to normal wear and tear and should be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous part is stuck. Be sure the engine is completely powered down before beginning this repair. This bolt is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

A side discharge chute is engineered to move the debris away from the machine's underside. This is because grass that is not only long and thick but also moist can get trapped and clog the deck and the blades. When this happens, you will have to stop to clear the accumulated clippings periodically. To mitigate clogging and maximize cutting, using a side discharge chute is ideal. When a side discharge chute is installed, but clogging still occurs, there might be a problem with the chute itself. It can be torn or already loose. Luckily, installing a brand-new side discharge chute is easy and will take less than 5 minutes. Start the installation by removing the spark plug. The engine should be cool to the touch. Then, lift and hold the mulch cover up. Take the brand-new side discharge chute and hook the tabs on to the hinge pins. Then, release the mulch cover. MTD manufactures this brand-new side discharge chute. It is an original replacement with Craftsman, MTD, Murray, Yard-Man, Yard Machines, Bolens, Huskee, and Mastercut lawnmowers. It comes in solid plastic material with a black finish. This side chute is sold individually.

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.