Parts for Oem-Attachments 19A30002000 / 2015: General Assembly Parts

This is the upper chute support bracket used on a lawn tractor bagger attachment. It provides structural support to hold the upper discharge chute in the correct position so grass clippings are directed into the collection bag. Replace this bracket if it is bent, broken, or missing, causing the chute to sag or disconnect during mowing.

Replace your grass catcher bagger cover screen when damaged or clogged to restore proper airflow and clipping collection. Verify fit with your model number.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

Hex cap screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if stripped, rusted, or missing hardware.

Clevis pin for lawn tractors and zero-turn mowers. Secures linkage connections in steering, deck lift, or control systems. Replace if bent, worn, or missing.

Secures components on grass catchers and lawn equipment. Replace if pin is bent, broken, or missing to restore proper attachment and safe operation.

Wing knob for lawn mowers and snow blowers. Secures chutes, bagger frames, and adjustable components. Replace if cracked, broken, or missing.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.

Secures the chute assembly on your grass catcher attachment. Replace if the strap is cracked, broken, or missing to properly hold the chute in place.

Ratchet fastener for lawn mowers and tractors. Secures components in place. Replace if broken, stripped, or missing to properly fasten parts together.

Replace a cracked, broken, or missing discharge chute on your lawn mower. Mounts to the side or rear deck to expel grass clippings during cutting.

Bagger adapter that attaches the collection chute to your mower frame. Replace if cracked, broken, or missing to restore proper grass catcher function.

Flat washer flange for lawn mowers, snow throwers, tillers, and edgers. Replace when washer is missing, damaged, or worn to ensure proper assembly.

Hitch bracket that secures and supports the grass bag attachment on lawn tractors. Replace if cracked, bent, or broken to restore proper bag mounting.

This part is a replacement handle plug. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle plug in tillers.This handle plug ensures that the opening at the end of the handle is sealed properly. This part can easily become worn, detached, or lost and thus will require replacement with a genuine part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle plug, the appropriate owner's manual and equipment diagrams should be referred to. This handle plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

Replacement shoulder screw for walk-behind mowers. Secures components and maintains proper spacing. Needed when original is stripped, missing, or damaged.

Adhesive foam tape for grass catcher assembly on lawn tractors. Replaces worn, cracked, or missing tape that secures components and dampens vibrations.