Need Help?
Call or text
Show parts
This upper chute assembly is part of a riding lawnmower bagging system. As the grass is mowed, it is pulled up and through the upper chute, where it is deposited in the grass bag. This is an OEM replacement part sourced directly from the manufacturer. If the upper chute has become damaged due to age or exposure to the elements, this part should be installed to repair the lawnmower.If the upper chute is damaged, grass clippings may not be fully bagged. Cracks in the chute can reduce efficiency, and some of the clippings may remain on the ground or eventually clog the tube. If the bag doesn't appear to be catching clippings after mowing, the upper chute assembly should be inspected. To repair the upper chute assembly, remove the machine's bagger and locate the damaged upper chute. Remove the damaged upper chute and dispose of it. Install the new upper chute and replace the mower bag. This upper chute assembly is a black plastic molded part that is sold individually. It is designed for use on lawnmowers manufactured by MTD and Craftsman.
Usually ships within 4 - 14 days
This replacement part is an upper chute. It is a genuine replacement part made by MTD. This part is used on the outside of many different lawn mowers and protects the parts inside of the machine. This part is made of durable plastic so that it lasts a long time. A new upper chute might be needed if the current one is damaged in any way including being dented, cracked, chipped, or snapped. If the previous part is damaged it is recommended that working gloves be used to prevent injury. This part should be fairly easy to replace and shouldn't require a lot of tools. Be sure the engine is powered down before replacing this part. This is a genuine OEM replacement part and is sourced directly from the manufacturer. This part is sold individually and is only intended for use in lawn mowers.
This carriage bolt is a fastener with a flat tip and a round head with threading along the shank. Also known as coach bolts and plow bolts, the item can be used with many types of lawn and garden equipment. This is a 5/16 carriage bolt that resists turning after the bolt has been tightened. Wear and tear or impact can cause damage to a carriage bolt and lead to the need to replace them.Removing a carriage bolt requires twisting the nut loose from the end of the bolt and then hitting the nut with a hammer. This will begin to move the shoulder out of the lawn equipment. Continue the process until the bolt is loose enough to remove. Installing a new carriage bolt simply requires sliding the bolt into the hole, adding the nut, and tightening things up.This carriage bolt is designed for use with Craftsman, MasterCut, Toro, Yard-Man, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines lawn and garden equipment. It can be used with lawnmowers, chainsaws, snowblowers, edgers, and tillers. This is a genuine OEM product sourced directly from the manufacturer as an individual component.
This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.
A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.
This part is a replacement handle plug. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle plug in tillers.This handle plug ensures that the opening at the end of the handle is sealed properly. This part can easily become worn, detached, or lost and thus will require replacement with a genuine part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle plug, the appropriate owner's manual and equipment diagrams should be referred to. This handle plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.
With small gasoline-powered tools that require control panels, this hex screw attaches the panel to the handles of the tools. Machined to be durable, important screws such as these take a real beating. In their locations at critical points on the handle, the hex screws are considered "wear items," and thus periodically, they must be replaced. The control panel itself is often a location of extreme forces, jostling, and abrupt movement in unpredictable directions. The constant movement, with sheet metal rubbing against the hex screws from every direction, make wear inevitable. The manufacturers recommend that spare screws of this type be kept on hand if the heavy use of the equipment is expected. Among the gasoline-powered tools that use these screws are snowblowers, yard tractors, mowers, tiller, chippers, shredders, and other tools requiring hand-maneuvered levers. These screws are compatible with a number of equipment brands and manufacturers, including MTD, Ryobi, Poulan, Yard-Man, Bolens, Troy-Bilt, and Yard Machines.
A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.
This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This bolt has many different uses and is a versatile part in lawn mowers and power tools. Bolts help other parts of the machine or appliance stay together and in place so that the entire machine is able to run smoothly. A new bolt might be needed if the current one is missing or damaged in any way. It is common for bolts to become stripped overtime due to normal wear and tear and need to be replaced. It's common for users to have some on hand so consider purchasing more than one. This repair should be simple and require no more than a screwdriver and possible pliers if the previous part is stuck. This bolt is sold individually and is a genuine OEM replacement part.
This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.
This replacement part is a ratchet fastener, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This ratchet fastener is found on most lawn mowers and is similar to a screw in that it helps keep parts of the appliance in place and secure.A new fastener might be needed if the current ones are damaged or missing. It is common for these types of fasteners to become stripped over time after years of normal wear and tear. The repair for this part should be fairly easy and will only require a screwdriver and possibly pliers if there is a fastener stuck. If there are parts of the lawn mower that are loose or falling off, a new fastener might be needed. This small part is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as some appliances require more than one.
This bagger chute adapter is a genuine MTD part, sold individually. This bagger chute adapter can be used as a replacement part in a lawnmower. The purpose of a bagger chute adapter in a lawnmower is to facilitate the function of the bagger, which catches grass clippings and assembles them in one convenient place.If the bagger chute adapter can no longer attach to the lawnmower due to damage in the form of puncturing, denting, scraping, warping, eroding, or damage of any kind, the bagger chute adapter should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This bagger chute adapter is compatible with the following outdoor appliance brands: MTD and Cub Cadet.
This is a lawn tractor grass bag attachment support bracket, and it plays an important role. This piece is attached to the tractor and is what will attach the bagger to the tractor frame. This helps to keep the bag that collects grass in place. If the bracket is damaged, it could mean that users will no longer be able to keep the grass bag attached, which will reduce the efficiency of the machine. It should be replaced if there is an issue.Made from metal, the lawn tractor grass bag attachment support bracket could still become damaged. This could occur because of an accident. It might also happen over time or if the piece becomes corroded. The replacement is easy, but owners should be sure to keep their hands safe by using gloves.The lawn tractor grass bag attachment support bracket is compatible with some models of lawn tractors from MTD, Troy-Bilt, Craftsman, and Cub Cadet. The piece is sold individually and does not come with mounting hardware. This is a genuine OEM replacement part sourced from the manufacturer.
This replacement part is a chute strap. It is a genuine replacement part made by MTD. This strap is able to connect to the chute so that the user can carry the bags of debris more easily. This allows for a safe and easy disposal of the grass clippings and mulch after work is complete.A new strap chute might be needed if the current one is damaged or missing. If the strap is unable to stay attached to the chute it is recommended that it be replaced. After years of normal use it is possible that the strap can become damaged or worn down over time and in this case, should be replaced before continuing use. This part is sold individually and is sourced directly from the manufacturer to ensure long-lasting use. This is also a genuine OEM replacement part.
The Hex Head Self-Tapping Screw is an OEM part for MTD outdoor power equipment. This screw is designed to securely fasten components of your equipment, providing reliable and durable connections. The thread size is 5/16 inches for major diameter, with 18 threads. The screw is 3/4 inches long and has a hexagonal or six-sided head.
Over time, the Hex Head Self-Tapping Screw can become damaged due to corrosion, stripping of the threads, or wear from frequent tightening and loosening. This can compromise the integrity of the connections and potentially lead to equipment malfunction.
Symptoms of a bad Hex Head Self-Tapping Screw include:
This OEM replacement part is designed for use with various models of MTD outdoor power equipment.
This is Cub Cadet foam tape. Foam tape is a strong adhesive tape with a smooth, soft surface. This product is often used instead of clips and fasteners because of its ability to withstand vibrations and frequent movement. The adhesive side has powerful bonding properties and is reliable enough for use in outdoor situations. This product fixes a variety of different issues. When the hand-grip portion of the steering wheel wears off or cracks, this adhesive tape is an acceptable replacement. The foam material on the outside of the tape is gentle on the hands. This product can also be used as a weather guard or insulation material and can be used to secure the hood of a lawn mower and protect against rain in any openings or cracks. The tape is strong enough to secure lawn and leaf bags as well. Before applying the tape, make sure the surface is clean and dry. Make sure there is no debris or dirt on the surface where the tape is being applied. Use scissors to cut a strip of tape long enough to cover the surface of the application. Peel back the paper from the adhesive side of the tape and apply it to the desired surface. Press firmly on the tape for five to ten seconds, then smooth the tape out to remove any air bubbles. Allow the tape to sit for five minutes before working with the area where the tape was applied.The item listed is sold individually and is a genuine OEM product sourced directly from the manufacturer. This product is compatible with most brands of lawn mowers.
This part is a bagger mounting bracket kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken mounting bracket in various lawn tractors. This kit includes everything required to attach the bagger securely to the back of the lawn tractor, including the brackets and the screws. If the old mounting bracket is insecure or broken, the bagger may become detached, thus this part should be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install the bagger mounting bracket, the appropriate owner's manual and equipment diagrams should be referred to. This bagger mounting bracket kit is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn tractors that have been manufactured by MTD, Troy-Bilt, and Cub Cadet.