Need Help?
Call or text
Usually ships within 4 - 14 days
This replacement hairpin is a certified OEM part manufactured to match the exact specifications required for use with a wide range of lawn and home appliances. The range of tools that use this clip include lawn mowers, snowblowers, pressure washers, cultivators, grass baggers, and lawn tractors. This hairpin is used to secure a clip that attaches the wheel to an appliance. As this pin is located near the ground, it is easy for an operator to accidentally bash their tool into the side of a tree, rock, or wall and knock the hair pin out of the wheel pin. If this happens and the operator is unaware of it, the pin will likely be lost forever. Without a hairpin, the wheel will become loose and possibly even fall off. This is an easy repair, though, as it only requires the appliance owner to secure the wheel and then insert a replacement pin. This high-quality replacement part is sourced from its original manufacturer and is compatible with machines made by Murray, Snapper, and Craftsman. This replacement hairpin does not include any additional hardware and ships individually.
This lock pin is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, generators, and tillers. A lock pin is a small cylindrical piece that attaches to the end of a nut; the function of a lock pin is to keep the nut in place and avoid it turning and unscrewing itself. Lock pins are among other small fastening components such as screws, nuts, bolts, and washers.A lock pin might have to be replaced in the likely occurrence that it is lost or misplaced; this is a frequent problem as it is a small piece that can disappear without immediately causing some kind of mechanical failure, so it can be hard to notice if it is missing. If the lock pin is damaged, it should be removed and replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This lock pin is compatible with the following brands: MTD, Honda, Cub Cadet, Toro, and Briggs & Stratton. This part sold individually.
This screw is built specifically to secure the choke bracket on a variety of snowblowers and tillers. Screws can be used in all sorts of situations to hold two components together for protection and security. Over time, the screw can become stripped, corroded, or damaged. When this occurs, the screw will need to be replaced.A visual inspection will determine whether the screw needs to be replaced. First, make sure the equipment is turned off and the spark plug wire has been disconnected. Look at the screw and clean it off to determine whether it has been damaged or broken. Sometimes, the screws can become loose and will need to be replaced to continue securing the choke bracket. The first step is to use a screwdriver or a nut removed to take out the damaged screw. Replace it with a new screw.This is a genuine OEM replacement part that is directly sourced from the manufacturer. The screw is sold as an individual part. It is made to be compatible with snowblowers and tillers manufactured by Lawn-Boy, Toro, Cub Cadet, and Tecumseh.
This is a high-quality K adapter that is made to fit several Generac generators. It is black and gold in color and is used to add extra functionality to the generator. This adapter can experience wear and tear which can cause it to stop working properly. In some cases, it may break or become so worn that it no longer functions. If a visual inspection of the K adapter shows damage or wear, it likely will need to be replaced. To replace the K adapter, first, turn off the generator and make sure it is unplugged from the wall. A set of basic tools and work gloves may be needed to make the replacement. Disassemble the generator to reach the carburetor, which can be taken off of the tool. Next, find the location of the K adapter and use tools to remove it. Reassemble the generator before use.This is a genuine OEM replacement part that is directly sourced from the manufacturer. The K adapter is made to be used with a variety of generators from Generac. The component is sold on an individual basis.
This is an M6 G8.8 screw that has been tempered for added strength. It is made of carbon steel and is ideal for use in lawn mower engines and other pieces of equipment. It measures 28 millimeters in length with an outside diameter of six millimeters. This Generac replacement screw can be used in any application where an M6 1.0 x 28 is required as a replacement for a broken or stripped screw. Routine maintenance may reveal missing or damaged screws that need to be replaced. Removal and replacement are simple. This M6 screw requires a hex wrench for removal. If the screw is in a difficult location, a socket with a hex wrench can be used. Install the new screw and tighten firmly but not overly tight as this can strip the threads. This M6 1.0 x 28 G8.8 screw is an individually sold Generac part. It is used in lawn mowers, lawn tractors, weed eaters, and other pieces of equipment that require heavy-duty screws for assembly.
This flange hex nut is a common piece of hardware used in a range of machines and engines. The flange on the nut helps to provide a secure connection, and it can reduce the amount of strain on the pieces that are being held together. If there is damage to these parts, or any are missing, it could cause vibrations in the machine or parts could become loose. Over time, flange hex nuts can become corroded or worn. Replacement is usually easy depending on the location of the nut.This flange hex nut is typically found in certain generator models from Generac. This OEM part is high-quality and has been sourced from the manufacturer. It is sold individually.