Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Fastener

Best Seller
Screw, 1 Piece
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY014874

This factory fastener secures appliance components such as panels, brackets, and trim. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and helps keep assemblies aligned for reliable performance.

  • Fastens appliance parts to maintain structural integrity and alignment
  • Helps address symptoms like loose or vibrating panels, gaps, or hardware that won't stay tight
  • Replaces lost, damaged, or corroded fasteners during repairs or reassembly
  • OEM-matched thread and fit for the specified location
What's included: 1 screw Install notes:
  • Disconnect power; shut off gas or water supplies before servicing
  • Replace one screw at a time to preserve alignment of parts
  • Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
  • Use the correct driver size/type specified for your model

Do-It-Yourself Stories from Customers like You Loud squealing noise   William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

More
$5.95
Compare At:
$7.14
You Save:
$1.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478

Size: 8 x 1/2 ab.

Do-It-Yourself Stories from Customers like You Wanted to update wood paneled compactor   Julie S. • San Antonio , TX • December 09, 2014

Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4159193

Size: 10-24X5/16-NI

Do-It-Yourself Stories from Customers like You Hinges were weak   Don M. • Colchester , VT • December 31, 2016

Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more

More
$8.95
Compare At:
$10.56
You Save:
$1.61

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw (Black)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7101P126-60

This factory fastener secures panels, trim, or brackets on your appliance. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned for proper operation and a clean, finished appearance.

  • Fastens exterior panels, trim pieces, or internal brackets to the appliance chassis
  • Replaces lost, damaged, or stripped hardware
  • Helps prevent vibration, rattling, and gaps between parts
  • Common signs you need this screw: missing hardware, loose or misaligned panel/trim, stripped head or threads
What's included: One screw Install notes:
  • Disconnect power before servicing; also shut off the gas supply
  • Use the correct driver; start the screw by hand to avoid cross-threading
  • Tighten snugly—do not overtighten to prevent stripping or cracking adjacent parts
  • Repair or replace the mounting point before installing

Do-It-Yourself Stories from Customers like You Oven element was burnedout   Robert J. • Hope , ME • February 08, 2015

Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Flange Lock Nut
Genuine Mtd part
By: Mtd
Part Number: 712-04063

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

Do-It-Yourself Stories from Customers like You Scraper blade on my craftsman snow blower was worn to the point the bolts were gone and the blade was catching the augers   Martin D. • Monroe , MI • February 11, 2022

Removed old scraper blade. Filed away bent edges where casing was worn. Installed new scraper blade and bolts. added a backing plate to body where erosion occurred. East repair. Best part was that big snowstorm was forecast for Wednesday night. 12-18 inches expected. Parts arrived on Wednesday morning, right at time predicted. I was up and running before the snow hit (actually only got 6 inches. So much for the Storm of the Century) Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Switch Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP777383

This switch nut secures a rotary control or switch to the appliance's front panel. Replacing a stripped or missing nut keeps the control stable so the knob turns smoothly and the shaft stays properly aligned.

  • Clamps the switch/control to the panel to prevent movement or rotation
  • Helps maintain correct knob alignment with dial markings
  • Common symptoms: loose or wobbly knob, switch rotates in the panel, missing/damaged nut
  • Often needed after service if the original nut is stripped or lost
What's included: 1 switch nut Install notes:
  • Disconnect electrical power before servicing
  • Remove the knob and any decorative escutcheon; thread the new nut onto the switch bushing from the front of the panel
  • Support the switch from behind while tightening; do not overtighten to avoid panel or switch damage
  • Restore power and test control operation

Do-It-Yourself Stories from Customers like You The trash compactor would not shut off.   Robert T. • Anchorage , AK • November 06, 2022

I replaced the upper-end Directional Switch for $45. Read more

More
$7.61
Compare At:
$9.13
You Save:
$1.52

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$7.95
Compare At:
$9.54
You Save:
$1.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Use 41001100
Genuine Whirlpool part
By: Whirlpool
Part Number: WP776356

Size: 3\8-24 inch.

Do-It-Yourself Stories from Customers like You Trash compactor one roller was missing and the handle cracked several times had been super glued too often   Thomas N. • Hill Country Village , TX • January 28, 2020

After I was shocked at the price to replace the trash compactor, I was happy to find that the parts, both front & back rollers and the handle, were available from AppliancePartsPros.com. They arrived as scheduled and after viewing two videos, the job went very smooth. I hope it puts another 27 years life into the unit. Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Flange Lock Nut
Genuine Mtd part
By: Mtd
Part Number: 712-04064

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

More
$5.95
Compare At:
$7.14
You Save:
$1.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Pin-Hinge
Genuine Mtd part
By: Mtd
Part Number: 747-0710A

 

More
$4.95
Compare At:
$5.84
You Save:
$0.89

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Hex Head Self-Tapping Screw
Genuine Mtd part
By: Mtd
Part Number: 710-04484

The Hex Head Self-Tapping Screw is an OEM part for MTD outdoor power equipment. This screw is designed to securely fasten components of your equipment, providing reliable and durable connections. The thread size is 5/16 inches for major diameter, with 18 threads. The screw is 3/4 inches long and has a hexagonal or six-sided head. 

Over time, the Hex Head Self-Tapping Screw can become damaged due to corrosion, stripping of the threads, or wear from frequent tightening and loosening. This can compromise the integrity of the connections and potentially lead to equipment malfunction.

Symptoms of a bad Hex Head Self-Tapping Screw include:

  • Loose or wobbly components
  • Difficulty tightening or loosening the screw
  • Visible damage or corrosion on the screw

This OEM replacement part is designed for use with various models of MTD outdoor power equipment.

More
$4.95
Compare At:
$5.94
You Save:
$0.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw (Sheet-Metal Pan Head)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP59002061

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

  • Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
  • Helps keep components aligned and secure during operation
  • Replace if the original is missing, rusted, stripped, or damaged
  • Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten
What's included: One screw Install notes:
  • Disconnect power; shut off gas or water supply before servicing
  • Support the panel or part being attached; hand-start threads to avoid cross-threading
  • Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
  • If multiple matching screws secure a part, consider replacing them as a set for consistent hold

Do-It-Yourself Stories from Customers like You Burners would not light   Michael C. • Bastrop , LA • August 08, 2024

Replaced burners and cleaned Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw (Fastener)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006380

This replacement screw secures appliance panels and components to restore proper fit and reduce vibration. A straightforward fastener that helps keep parts aligned and prevents noise or loose trim from worsening. What it does:

  • Fastens panels, brackets, or trim pieces to the appliance frame
  • Helps stop rattling or vibration caused by loose or missing hardware
  • Restores proper alignment where original screw has been lost or damaged
  • Works wherever the OEM screw specification is required for secure mounting
What's included: One replacement screw Install notes:
  • Turn power off and unplug the appliance before working on it
  • Use the correct screwdriver or bit to avoid stripping the head
  • Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
  • Keep removed fasteners organized so you reinstall the correct pieces

Do-It-Yourself Stories from Customers like You We had lost/ damaged some refrigerator parts during a move   Randy F. • Indianapolis , IN • October 05, 2015

We were able to easily order the parts we needed to fix our refrigerator. The diagram and break-downs of the appliances make it really easy to locate the parts that you need. Read more

More
$7.95
Compare At:
$9.54
You Save:
$1.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Hex Bolt
Genuine Mtd part
By: Mtd
Part Number: 710-0514

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

Do-It-Yourself Stories from Customers like You Stripped out steering gear.   Wayne H. • Stewartstown , PA • September 21, 2018

New steering column. Read more

More
$4.52
Compare At:
$5.38
You Save:
$0.86

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Spacer-Shoulder
Genuine Mtd part
By: Mtd
Part Number: 738-04162C

 

More
$15.11
Compare At:
$17.49
You Save:
$2.38

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Thermostat Mounting Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7112P004-60

This mounting clip secures a thermostat, temperature sensor, or capillary bulb in the correct position so it can sense temperature accurately and control the appliance. Replacing a damaged or missing clip helps prevent loose components and erratic readings. What it does:

  • Holds the thermostat or sensor firmly against its mounting surface for proper thermal contact
  • Helps maintain stable, accurate temperature regulation
  • Replaces a bent, broken, or missing clip that won't hold securely
  • Common symptoms include a dangling sensor/bulb, rattling, or inconsistent temperature response
What's included:
  • 1 clip
Install notes:
  • Disconnect power (and gas, if applicable) and allow the appliance to cool completely before service
  • Access the thermostat/sensor area and note original orientation and routing
  • Move the component into the new clip and secure it at the original mounting location
  • Avoid kinking a capillary tube or damaging sensor leads; the clip is fully seated

Do-It-Yourself Stories from Customers like You The Oven thermostat clips that hold the thrermostat break off when cleaning the oven   George B. • Albany , OR • March 31, 2014

The clips work great and we can replace the broken ones and still have some on hand for future use. Thanks Read more

More
$7.95
Compare At:
$9.54
You Save:
$1.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Brands

Ace Parts Admiral Parts Agri-Fab Parts Agway Parts Amana Parts Ariens Parts Ayp Frigidaire Home Products Parts Belknap Parts Big O Parts Black & Decker Parts Black Max Parts Blue Grass Parts Bolens Parts Briggs & Stratton Parts Brute Parts Builder's Best Parts Caldor Parts Caloric Parts Cenex Parts Central Park Parts Clicklink Parts Coast To Coast Parts Columbia Parts County Line Parts Craftsman Parts Crosley Parts Cub Cadet Parts Cub Cadet Home Maintenance Parts Dacor Parts Dewalt Parts Dixon Parts Duerr Parts Dynasty Parts Echo Parts Electrolux Parts Estate Parts Eversharp Parts Forest City Parts Frigidaire Parts Gaggenau Parts Garden Groom Parts Garden King Parts Gardenway Parts Generac Parts Grass Handler Parts Green Thumb Parts Greenbrier Parts Guardian Parts Hardware Hank Parts Hardwick Parts Hechinger Parts Heritage / Agway Parts Homelite Parts Honda Parts Huskee / Husky Parts Husqvarna Parts Hydro-Gear Parts Ikea Parts Imperial Parts Inglis Parts J.C. Penney Parts Jade Parts Jenn-Air Parts Jonsered Parts Julien Parts Karcher Parts Kenmore / Sears Parts Kirkland Parts Kitchenaid Parts Kleen Kut Parts Kmart Parts Lauson Parts Lawn Champ Parts Lawn Chief Parts Lawn General Parts Lawn Groom Parts Lawn Hawk Parts Lawn Pro Parts Lawn Boy Parts Lawnflite Parts Long Life Parts Lowe's Parts Magic Chef Parts Malmo Parts Mantis Parts Mark Master Parts Mastercraft Parts Mastercut Parts Maytag Parts Mcculloch Parts Menu Master Parts Modern Maid Parts Montgomery Ward Parts Mtd Parts Mtd Black Parts Mtd Gold Parts Mtd Pro Parts Murray Parts New Englander Parts Norge Parts Oem-Attachments Parts Our Own Supreme Parts Platinum Parts Poulan Parts Power Kraft Parts Power Pro Parts Power Streak Parts Power Tech Parts Premiere Parts Promo Parts Quality Parts Rally Parts Ranch King Parts Remington Parts Roper Parts Ryobi Parts Sam's Club Parts Samsung Parts Sears Parts Select Series Parts Sentar Parts Sentry Parts Servistar Parts Signature Parts Silver Series Parts Simplicity Parts Snapper Parts Snow Champ Parts Snow Pro Parts Snowflite Parts Spear Edge Parts Speed Queen Parts Statesman Parts Stc American Parts Supreme Parts Task Force Parts Tecumseh Parts Thermador Parts Timberland Parts Topflite Parts Toro Parts Tradesman Parts Trimmer Plus Parts Troy-Bilt Parts Turf King Parts Turf Power Parts Turf Pro Parts Turf Til Parts Turf Trac Parts Turf Trim Parts W.W. Grinder Parts Weedeater Parts Western Auto Parts Western Sun Parts Westminster Parts Whirlpool Parts White Outdoor Parts Whites Parts Wizard Parts Yard Machines Parts Yard Pro Parts Yard-Man Parts
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store