Gibson Washer Dryer Combo Fuse Or Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204267
Dryer won't heat or shows E64 error? High-limit thermostat cuts power if overheating occurs. Moderate DIY fix with our video guide and instructions.
This part fixes the following symptoms
-
Shuts off too soon
-
Too hot
-
Takes too long to dry
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
The dryer did not heat! Linda R. • La Jolla , CA • November 30, 2014
My appliance repair guy checked out the problem, but the stack washer dryer required the contractor to dismantle the cabinet to allow the repair to occur. So i wanted the parts available for the repair, so we would not have to have the dryer pulled apart in a small space for an extended time i ordered the parts on Friday afternoon and they arrived at my home before noon on Saturday! The contractor and the repairman were able to coordinate the repair on Tuesday morning, and though the...
Read more
More
$44.50
- Compare At:
-
$62.47
- You Save:
-
$17.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 134120900
Dryer won't start or shuts off unexpectedly? A failed thermal limiter is often the cause. This safety fuse prevents overheating. DIY repair in 30-45 minutes.
This part fixes the following symptoms
-
Shuts off too soon
-
Too hot
-
Takes too long to dry
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Frigidaire part
By: Frigidaire
Part Number: 131298300
Dryer won't heat or overheats? A failed cycling thermostat can't regulate temperature. This direct-fit part takes 15–30 minutes to replace.
Do-It-Yourself Stories from Customers like You
Rubbing blocks and felt that seal the front of the drum are worn drum is sagging and staining clothes with smears of rust Seth W. • Upper Arlington , OH • January 23, 2016
Replaced upper and lower felts. Painted rubbing surface on inside of drum with refrigerator enamel. Took out drum and lubed rear bearing. Replaced 2 of the 3 thermostats, and the belt just on principle.
Spent a lot of time with shop-vac removing lint from drier and exhaust ducts.
Runs great and is no longer cooking or staining clothes.
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Frigidaire part
By: Frigidaire
Part Number: 134048800
Dryer overheating or taking too long to dry? This control thermostat regulates internal temperature by cycling the heater on and off. Easy replacement.
Do-It-Yourself Stories from Customers like You
My dryer was taking too long to dry my clothes. Gerard C. • Millville , MA • March 08, 2017
I replaced both thermostats, the seals and the heating element and the belt. It's an easy job to keep my dryer last longer.
Read more
More
$81.21
- Compare At:
-
$95.83
- You Save:
-
$14.62
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204307
Dryer not heating or overheating? A faulty temperature control thermostat often causes inconsistent heat cycles. This part regulates dryer temperature.
Do-It-Yourself Stories from Customers like You
Not heating. Ernesto C. • Hollywood , FL • August 16, 2020
Yes
Read more
More
$97.95
- Compare At:
-
$116.56
- You Save:
-
$18.61
Ever consider the vital role Gibson washer dryer combo replacement parts play in keeping your appliance running smoothly? These parts are essential in maintaining the efficiency and safety of your washer dryer combo, ensuring that each laundry load is handled without a hitch. When your Gibson washer dryer combo is in need of maintenance, it's these parts – like the fuse and sensor – that often need replacing to restore full functionality.
Fuses act as a safety device, protecting your machine from potential electrical damage by breaking the circuit when necessary. This small yet mighty component can be the difference between minor maintenance and major repairs. Sensors, on the other hand, are like detectives, constantly monitoring conditions like temperature and moisture to optimize clothes drying and prevent overheating. Without functioning sensors, you might find your laundry either over-dried or still damp.
Using OEM replacement parts is key to maintaining the high quality and compatibility your Gibson washer dryer combo was built with. These genuine parts are designed to fit perfectly and perform reliably, giving you peace of mind that your appliance will continue to serve you well.
Whether you need a Gibson washer dryer combo fuse or sensor, these parts are readily available and crafted to the highest standards. Keeping your washer dryer combo in peak condition has never been easier or more accessible. So next time you find a hiccup in your laundry routine, remember that quality replacement parts are just a step away from restoring your appliance to full health.
More