Gibson Washer Dryer Combo Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 131758600
The Washer Timer is an OEM part for Frigidaire washing machines. It controls the sequence of operations in the washing machine, including filling, washing, rinsing, and spinning. By managing the timing of these cycles, the timer ensures the washer operates efficiently and effectively.
Causes of a bad washer timer can include electrical malfunctions, wear and tear from regular use, or physical damage to the timer mechanism. Power surges, exposure to moisture, and accidental impacts can also lead to timer failure.
Symptoms of a bad Washer Timer include:
- Washer not advancing through cycles
- Machine getting stuck on a single cycle
- Incorrect timing for washing, rinsing, or spinning
- Washer not starting or completing a cycle
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The washer wouldn't advance to the next cycle Alphonso C. • Axton , VA • January 03, 2017
I replaced the timer
Read more
More
$216.66
- Compare At:
-
$259.99
- You Save:
-
$43.33
Genuine Frigidaire part
By: Frigidaire
Part Number: 131719100
This dryer timer is the cycle control that advances your dryer through Timed and Auto Dry settings. Replacing a failed timer restores proper cycle progression, start/stop, and end-of-cycle shutoff.
- Advances the cam and internal contacts to move the dryer through heat, motor, and cool-down steps
- Governs run time on Timed Dry and Auto Dry cycles
- Routes power to the correct circuits in sequence; a failed timer may not advance or may stop early
- Common symptoms include timer knob not moving, dryer running indefinitely, or not starting on certain settings
What's included: 1 dryer timer assembly Install notes:
- Disconnect power; for gas models, also shut off gas
- Remove knob/dial, open the console, and unmount the timer
- Label or photograph wiring; transfer wires one at a time to the new timer
- Reassemble and test both a Timed Dry and an Auto Dry cycle
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014
I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the...
Read more
More
$180.52
- Compare At:
-
$216.62
- You Save:
-
$36.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303297177
This dryer timer controls and advances the cycle you select, routing power to the correct components and shutting the dryer off at the proper time. Replacing a worn timer restores consistent cycle timing and end-of-cycle shutoff.
- Controls cycle selection and duration
- Advances the dial through the program and turns the dryer off at the end
- Routes power to dryer components at the correct times during the cycle
- Signs of a failing timer may include: cycle not advancing, running indefinitely, stopping early, or erratic timing
What's included: 1 dryer timer Install notes:
- Disconnect power; for gas dryers, also shut off the gas supply
- Remove the control knob and access the console to unmount the old timer
- Label or photograph wiring; move terminals to the new timer one at a time to avoid miswiring
- Align the timer shaft with the dial, secure the timer, and test operation before reassembly
Do-It-Yourself Stories from Customers like You
Turned out to be a thermostat wouldn't heat up and the timer would not advance John M. • Lewiston , UT • December 21, 2024
Changed the thermostat
Read more
More
$172.55
- Compare At:
-
$203.61
- You Save:
-
$31.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 134049500
Made to be used on washing machines, this part is a timer. This component controls the electrical parts and the duration of time of the washing machine's cycles. It controls the operation of the washing machine, including each of the cycles.When the timer will not advance, the washing machine could become stuck in a cycle and run constantly without stopping. The washing machine may not advance through the particular cycle like the washing, rinsing, or spinning and could get stuck on one of the cycles. It's important to unplug the washing machine from the electrical outlet before attempting to repair or replace any parts. The replacement process is fairly easy and takes about 15 minutes to complete.This timer is compatible with washing machines that are manufactured by the Frigidaire, Gibson, Kenmore, and White-Westinghouse brands. This part is sold individually and is sourced straight from the manufacturer itself.
Do-It-Yourself Stories from Customers like You
Timer switch on washing machine would not advance Mark G. • Bay Shore , NY • October 20, 2014
My wife suspected that the washing machine was broken because the load of wash started in the morning was still running at dinner time.
I determined all the functions of the machine worked except the timer. AppliancePartsPro's website helped to confirm my diagnosis. Incidentally, this all took place in the evening...when I called there was someone in Customer Service to take my call and who also confirmed my diagnosis. I ordered the part and was glad to know there was no risk since I could...
Read more
More
$217.73
- Compare At:
-
$259.10
- You Save:
-
$41.37
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134049600
Do-It-Yourself Stories from Customers like You
Washer timer was broken would not advance cycle David H. • Hollister , MO • August 02, 2015
I ordered a new timer switch and received it in 3 days from the time I ordered it, installation was a breeze and now my washer works great
Read more
More
Ensuring your laundry stays on track means having reliable Gibson washer dryer combo control board replacement parts. This key component acts as the brains of your washer-dryer unit, efficiently managing all functions to keep your clothes clean and dry without a hitch. By handling everything from washing cycles to drying times, it maintains optimal performance.
Gibson washer dryer combo parts are specifically designed for perfect fit and superior performance in your appliance. Opting for OEM replacement parts, like the Gibson control board, assures you of the highest quality and compatibility, minimizing future issues.
Remember, when your washer dryer combo isn't performing its best, there's a dependable Gibson washer dryer combo control board available to keep your laundry routine smooth and stress-free. Quality parts like these ensure your appliance remains in top working condition.
More