Gibson Washer Parts

Genuine Frigidaire part

Gibson Timer

By: Frigidaire

Part Number: 134049500

Made to be used on washing machines, this part is a timer. This component controls the electrical parts and the duration of time of the washing machine's cycles. It controls the operation of the washing machine, including each of the cycles.When the timer will not advance, the washing machine could become stuck in a cycle and run constantly without stopping. The washing machine may not advance through the particular cycle like the washing, rinsing, or spinning and could get stuck on one of the cycles. It's important to unplug the washing machine from the electrical outlet before attempting to repair or replace any parts. The replacement process is fairly easy and takes about 15 minutes to complete.This timer is compatible with washing machines that are manufactured by the Frigidaire, Gibson, Kenmore, and White-Westinghouse brands. This part is sold individually and is sourced straight from the manufacturer itself.

This part fixes the following symptoms

Timer will not advance

Do-It-Yourself Stories from Customers like You Timer switch on washing machine would not advance Mark G. • Bay Shore , NY • October 20, 2014

My wife suspected that the washing machine was broken because the load of wash started in the morning was still running at dinner time. I determined all the functions of the machine worked except the timer. AppliancePartsPro's website helped to confirm my diagnosis. Incidentally, this all took place in the evening...when I called there was someone in Customer Service to take my call and who also confirmed my diagnosis. I ordered the part and was glad to know there was no risk since I could... Read more

$217.73

Compare At:: $259.10
You Save:: $41.37

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Frigidaire part

Gibson Transmission Assembly (Washing Machine)

4.0 (1)

By: Frigidaire

Part Number: 134736400

This transmission assembly drives the agitation and spin cycles by transferring motor power to the tub. Replacing a worn transmission helps restore proper wash action and spin performance.

Converts motor rotation into the geared motion needed for wash (agitate) and spin
Shifts between agitation and spin modes during the cycle
Common failure signs: no or weak agitation; no spin or slow spin
Other symptoms include loud grinding/rumbling, oil leaking from the center area, or the motor running while the tub doesn't move

What's included: 1 transmission assembly Install notes:

Disconnect power and water; move the appliance to a stable work area and use proper lifting support
Access the drive assembly from below; support the tub/frame to prevent tipping
Mark component orientation, remove fasteners and drive components as needed, and transfer any reusable parts from the original unit
Tighten mounting hardware evenly, then run a test cycle and check for leaks

Do-It-Yourself Stories from Customers like You Transmission seal leaking oil into washer tub. Michael M. • Shirley , NY • February 18, 2024

Transmission seal was not available so I installed a new transmission. Works well. Thank you! Read more

$687.75

Compare At:: $811.54
You Save:: $123.79

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Frigidaire part

Gibson Splash Tub Cover Assembly

By: Frigidaire

Part Number: 131551103

For seal only use part number 131901400.

$136.95

Compare At:: $162.97
You Save:: $26.02

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Frigidaire part

Gibson Lid Bumper (Rubber), Single

By: Frigidaire

Part Number: 134075500

This rubber lid bumper cushions the washer lid to prevent hard contact and reduce noise and wear. It replaces a worn or missing bumper to help the lid close more softly and sit level. What it does:

Acts as a soft contact point between the lid and cabinet to absorb impact
Reduces lid slamming, rattling, and vibration during operation
Helps keep the lid aligned and prevents cosmetic damage to the rim
Commonly replaced when the bumper is cracked, flattened, or missing

What's included:

One rubber lid bumper

Install notes:

Install by removing the old bumper and pushing the new bumper into the mounting hole or recess; hand tools may be helpful
Ensure the appliance is powered off and disconnected before servicing
Inspect surrounding mounting area for damage and replace any broken retainers as needed
If the bumper is hard to seat, warm it briefly with a hair dryer to improve flexibility

$12.95

Compare At:: $15.41
You Save:: $2.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Frigidaire part

Gibson Bracket (Top Front)

5.0 (1)

By: Frigidaire

Part Number: 131460900

This top-front bracket secures the appliance's top or front panel in place to keep panels aligned and stable. Replacing a damaged bracket restores proper panel fit and reduces rattling or loose trim. What it does:

Mounts and supports the top/front panel to the appliance frame
Prevents panel movement that can cause noise or misalignment
Helps maintain correct door or control-panel fit where applicable
Used when bracket is bent, cracked, or missing mounting holes

What's included:

One top-front bracket

Install notes:

Disconnect power (and water, if applicable) before starting any repair
Remove necessary trim or panels to access the bracket; retain original fasteners unless new hardware is supplied
Align bracket and reinstall screws securely; avoid overtightening to prevent strip-out
If other mounting hardware is damaged, replace it to ensure a secure fit

Do-It-Yourself Stories from Customers like You I needed parts to put it back together Christopher M. • Hampton , VA • February 17, 2015

My washer and dryer was stacked and I needed the right parts to put the tops and "feet" back on them. Read more

$33.95