Parts for Craftsman 358381600: Handle / Carburetor Parts

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a chainsaw. The purpose of the screw in a chainsaw is to serve as a small fastening component within the internal mechanisms of the appliance. The screw in a chainsaw might need to be replaced if it is lost, misplaced, or stripped away over time from general wear and tear. If the screw is lost or misplaced, which is easy to do as it is a small part that can disappear without affecting the functionality of the appliance, the screw should be replaced by this genuine OEM replacement part. The same should occur if the screw has been damaged.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This replacement flywheel assembly for use in chainsaws fits onto the crankshaft. It features magnets along the side that provide an electric charge when the magnets go past the ignition module. The electric charge that is created by the flywheel and ignition module passes to the spark plugs, which spark the air-fuel mix in the cylinder. The metal flywheel could become corroded, which can make parts of it brittle. Over time, the flywheel could also become worn down from natural use, and it might no longer function properly. This would mean that it would be difficult or even impossible to start the chainsaw. When this part fails, owners should replace it right away. The authentic OEM chainsaw flywheel assembly is sold individually. It is made to work with chainsaws, and it is compatible with several different brands including Husqvarna, Craftsman, Poulan, and Poulan Pro.

This starter hub is a genuine Husqvarna part, sold individually. This starter hub can be used as a replacement part for chainsaws. The starter hub for a chainsaw is a component of the recoil starter mechanism; the starter rope is coiled around a pulley that is held in place by the tension of a spring, and that spring is attached to the starter hub. The function of the starter hub is to rotate the pawls of the flywheel such that the engine is activated.A starter hub might have to be replaced in the event that it suffers damage that impedes it from connecting to or facilitating the operation of the pawls of the flywheel. If the starter rope does not turn on the engine when pulled, this could be a sign of damage in the starter hub. The starter hub can suffer damage from general wear and tear or overuse, and if this is the case, it should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter hub is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

The recoil spring is a vital part of the starter mechanism in chainsaws. It will apply tension on the pulley, which allows it to retract the rope. Without a working spring, it will be difficult or even impossible to start the chainsaw. While the metal springs are durable, they could start to wear out over time and will no longer be effective. In addition, the springs could suffer damage or could become corroded. They could also be lost when making other repairs to the chainsaw. If there is any issue with the spring, it will require a replacement. This authentic OEM replacement recoil spring is sold individually. The chainsaw recoil spring is compatible with several brands including Poulan, Poulan Pro, Husqvarna, Jonsered, Craftsman.

This starter pulley is a genuine Husqvarna part, sold individually. This starter pulley can be used as a replacement part in a lawn mower. This component is a part of the starter assembly, which is used to power the appliance on.If the starter pulley is dented, cracked, punctured, pierced, warped, or eroded within the typical lifespan of the lawn mower, the starter pulley should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe use of the appliance cannot be guaranteed without a starter pulley in place.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This starter pulley is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.

This replacement part is a starter kit and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. This starter kit is typically found in chainsaws and allows the user to start the engine inside the machine so that it may be used. This new starter kit might be needed if the user is unable to start the machine or if the appliance stops abruptly while in use. It is possible that the starter might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This genuine Husqvarna purge & line assembly can be used as a replacement part for the small engine of a chainsaws. The function of a purge & line assembly for a chainsaw is to provide fuel to the primer bulb, which delivers the fuel to the carburetor, which mixes the fuel with the air intake in the proper ratio to ignite the spark plugs and power up the engine.A purge & line assembly might have to be ordered as a complete replacement for a primer bulb in the event that the primer bulb malfunctions or falls into disrepair as a result of damage suffered. Symptoms of a malfunctioning or broken primer bulb can include fuel leakages that can be attributed directly to the primer bulb, an engine that misfires or has frequent false starts, or a cracked, pierced, or eroded bulb. If any of these symptoms are the case, the bulb should be removed and replaced with this genuine OEM assembly before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This purge & line assembly is compatible with the following brands: Husqvarna, Craftsman, and Poulan.