Hedge Trimmer Cap, Lid & Cover

This is a fuel cap that is used with several types of small engine lawn and garden equipment. The purpose of the fuel cap is to make sure that all gasoline in the fuel tank stays in place and there are no leaks present. The fuel cap can experience wear and tear over time or become cracked, broken, or damaged if it impacts other items. If fuel can be smelled through the cap, if the cap doesn't tighten, or if it is otherwise visibly damaged, the fuel cap should be replaced.Prior to replacement or even removing the fuel cap, the equipment should be placed in a well-ventilated area. It's also important to disconnect the spark plug wire to create a safe environment. Empty any fuel in the tank into an appropriate container before moving on. Once empty, you can replace the old cap with a new one.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold as a single fuel cap. The part is created to be compatible with string trimmers, hedge trimmers, and leaf blowers manufactured by Poulan, Poulan Pro, and Craftsman.

This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

This genuine Echlimiter cap can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of a limiter cap for such small engine appliances is to reduce harmful emissions in the effort of environmental protection. A limiter cap can be worn down and lose its essential functionality over time from general long-term usage or exposure to corrosive external materials such as dirt, debris, and pebbles. A limiter cap can be pierced, punctured, or warped to the point that it loses its efficacy in a way that is visible to the naked eye, in which case it should be replaced in order to serve its function of reducing harmful emissions from the appliance. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo and Little Wonder.

This genuine Echo limiter cap can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The function of a limiter cap for such outdoor appliances is to minimize the environmentally detrimental emissions from the exhausts of these appliances.A limiter cap can suffer damage from general long-term use and standard wear and tear. If the limiter cap is damaged to the point where it is visibly eroded, punctured, pierced, ripped, torn, or otherwise rendered ineffective, it should be removed and replaced as soon as possible. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo, Mantis, and Little Wonder.

This air cleaner case offers additional protection to the air filter in lawn and garden equipment, which ensures no debris or dirt makes its way into the engine where it can cause problems with performance. The air cleaner case is created of metal and fits on top of the air filter. It includes ventilation slots to let air in. Over time or through impact, the case can become damaged or broken and will need to be replaced.A visual inspection of the air cleaner case will indicate whether the part is damaged. It could have broken holding tabs, a cracked surface, or holes in the material. If any of these things are noticed, the air cleaner case should be replaced. No tools are required. Take off the old case and install the new one.This air cleaner case is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. This case is designed for use with string trimmers, tillers, hedge trimmers, edgers, and pole pruners manufactured by Echo, Little Wonder, and Mantis. This part is sold individually.

This air cleaner cover assembly lid is used on outdoor lawn and garden power equipment such as trimmers, pole saws, straight trimmers, brush cutters, edgers, and hedge trimmers. It designed to be compatible for use with products made by Echo. The air cleaner cover assembly lid part plays an important role in the proper functioning of the listed outdoor machines. That's because this air cleaner cover assembly lid secures the air filter to the air cleaner case of the machine. It also it protects internal parts of the machine, like the carburetor, from dirt and debris. The air cleaner cover assembly lid does include the necessary fastener knob, and it is sold individually.The replacement or repair process of the air cleaner cover assembly is very simple. All the user has to do is remove the air cleaner assembly, loosen and remove the thumb screw, remove the air cleaner lid, and replace it. This air cleaner cover assembly lid is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is Echo.

This is a genuine breather cover replacement for select outdoor lawn and garden equipment engines. The breather cover, also known as a vent cover, is installed directly onto the vent tube that connects to the carburetor, ensuring that the unit can breathe while it is in use. The vent cover is a sturdy piece, but it is also exposed to a lot of vibrations and could even be affected by impact damage. Replacing it with an original part is going to ensure that your engine can vent correctly. This OEM breather cover is manufactured by Echo. It works with blowers, vacuums, trimmers, edgers, and vent-piped saws from Echo, Little Wonder, and Shindaiwa. The breather cover doesn't require any tools to install. Be sure that gloves are worn whenever doing engine work. Allow the machine to cool completely and work in a well-ventilated area at all times. Make sure that the new vent is installed properly so that the correct engine pressure is maintained and the carburetor can breathe like it should.