Hedge Trimmer Starter

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This part is a replacement recoil starter assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective recoil starter assembly in hedge trimmers.The recoil starter assembly helps the engine to start up by spinning the crankshaft when the user pulls the rope. This part is critical, and if it is faulty in any way, the trimmer may not be able to start. Thus, when damaged, this part should be immediately replaced. When working on or near an engine it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this recoil starter assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This recoil starter assembly can be used with different models of hedge trimmers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This OEM starter assembly is necessary for starting the handheld lawn and garden equipment. The starter assembly includes an orange plastic cover/housing and a black pull handle that's attached to a starter pulley assembly with a white pull rope. Please note that the fasteners to attach this to the machine are not included with this starter assembly part and must be ordered separately.A new starter assembly may be needed if the cover/housing is broken, the pull handle is broken, the rope is broken, or if any part of the pulley system is broken. If the rope does not retract, this is another sign that a new starter assembly is needed.This is a genuine Husqvarna part sourced directly from the manufacturer and sold individually. This part is compatible with outdoor power equipment manufactured by Husqvarna including edgers, hedge trimmers, pole saws, saws, and grass trimmers.

This starter pawl is a high-quality component used with lawn and garden equipment made by Husqvarna. The starter pawl is one of the components that make up the recoil starter mechanism. It connects the recoil pulley to the flywheel so the lawn equipment can work properly. When a starter rope is tugged, it spins the starter pawl which sets the flywheel into motion so the engine can start.If the starter pawl is damaged or broken, it will need to be replaced. A starter pawl with problems will make it impossible to start the lawn tool. The replacement process may require the use of a screwdriver and a hex key. The starter rope housing should be removed first to get access to the starter pawl. Take out the old starter pawl and replace it with the new one before reassembling the equipment.This starter pawl is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The pawl is created to be compatible with hedge trimmers, string trimmers, pole pruners, and edgers manufactured by Husqvarna.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

A new rope kit may be necessary if the original rope becomes deteriorated or frays with regular equipment use.This rope is part of the recoil starter assembly, an essential component that enables the motor to be pull-started. Due to frequent usage and wear and tear, the rope can easily fray. Without this rope the engine cannot be manually pull-started. It is manufactured from durable nylon.This Husqvarna rope kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement Husqvarna rope kit fits various different models of Husqvarna, Poulan, and Craftsman blowers, trimmers, and hedge trimmers. Please note this is sold individually. Handle grip not included.

A starter rope is wrapped around the recoil drum starter pulley. The starter spring creates tension for the rope to recoil. It is 2.25 inches in diameter on the outside of the pulley and 0.25 inches in diameter on the inside of the pulley. If the starter spring has gone bad, consider replacing the recoil drum starter pulley while repairing the other part. It may be that the damage of the starter spring has chipped the drum, or the drum may be worn from the friction of spinning as the rope uncoils and recoils. If the recoil drum starter pulley is damaged, it may not spin freely. This could prevent the engine from starting. The replacement of this part should be quick and easy and only requires a screwdriver and pliers to complete. The recoil drum starter pulley works with trimmers, hedge trimmers, pole saws and pruners, leaf blowers/vacuums, small engines, chipper shredders, edgers, tillers, and water pumps manufactured by Echo, Little Wonder, Mantis, and Shindaiwa brands. It is a genuine OEM part.

This starter rope is designed for use with several lawn and garden tools, including as hedge trimmers. It is wrapped around the starter pulley and can be manually pulled on to get the engine to start up. After wear and tear or a lot of use, the rope can start to fray and weaken. Given more time, the starter rope will completely break and no longer be useable. Many people will realize the starter rope is broken when pulling on it and receiving a line of rope in their hands. If the starter rope is broken, it needs to be replaced. First, the spark plug needs to be removed to prevent the engine from powering on. Next, the starter rope can be removed from the guide. The engine cover and fuel tank will need to be removed, as well as the dipstick tube and blower housing. Next, the recoil spring should be rewound before threading the new rope into the pulley. This is an individual genuine OEM component that comes directly from the manufacturer for the highest quality. It can be used with Echo, Little Wonder, and Shindaiwa trimmers, chipper shredders, leaf blowers, and hedge trimmers. A replacement will require basic tools like screwdrivers and a socket wrench.