Parts for Broan 113023: Hood Assembly Parts

This is a replacement mounting screw designed to secure components and panels on compatible Broan appliances. It restores proper fastening to reduce rattles, loose trim, or parts that no longer stay in place. What it does:

• Secures panels, covers, brackets, or small components to restore proper alignment and stability
• Replaces missing or stripped screws that can cause vibration, noise, or loose parts
• Matches the OEM fit for reliable retention when the correct hole and threads are present
• Helps maintain safe operation by keeping protective covers and guards fastened

• Use the correct driver and turn until snug; do not overtighten to avoid stripping or cracking
• Disconnect power to the appliance or follow manufacturer safety guidance when accessing internal parts
• Keep removed hardware and fittings organized to ensure correct reassembly

A single replacement mounting screw used to fasten components on compatible Broan ventilation units. Restores secure assembly to reduce vibration, rattling or loose panels and keep parts aligned for proper operation. What it does:

• Secures panels, brackets or small components to the appliance chassis
• Prevents rattling and vibration caused by missing or loose fasteners
• Keeps motor and blower assemblies properly aligned when used in original mounting locations
• Helps maintain a safe, stable installation of ventilation components

• Disconnect power to the appliance before servicing to prevent electrical shock
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten snugly but avoid over-torquing to prevent damage to threads or sheet metal
• Keep removed hardware organized so all fasteners are reinstalled

This wire harness routes power and signals between the hood's motor, lights, switches and controls to restore electrical connectivity and proper operation. It replaces a damaged or burnt wiring assembly to help clear electrical faults. What it does:

• Connects the blower motor, light sockets, and control switches to the hood's power supply
• Restores broken or corroded wiring paths that can cause intermittent operation or complete failure
• Helps stop arcing, shorts, or blown fuses when the original harness is damaged
• Enables proper function of speed switches and lighting circuits once installed

• One complete wire harness assembly as shown

• Disconnect power to the appliance at the breaker before starting any work
• Verify connector orientations and secure all wiring with the original clips or mounts
• Inspect adjacent components for heat or damage that could have affected the harness

This is a direct replacement part sold under the manufacturer's part number for use with compatible ventilation and range hood products. It provides a like-for-like swap when the original component fails, restoring normal function. What it does

• Replaces a failed or damaged factory part to restore appliance operation.
• Prevents intermittent or complete loss of the related feature when installed correctly.
• Helps avoid makeshift repairs that can cause further damage or unsafe operation.
• Works only in models specified by the manufacturer for this part number.

• One replacement part as shown and labeled by the manufacturer.

• Disconnect power to the appliance before attempting any repair to avoid shock or injury.
• Use proper tools and secure fasteners to the manufacturer's specifications; do not force parts into place.

This is a replacement Broan part sold as a single unit to restore factory operation when an exact component has failed. Use this listed part only when your appliance requires the matching OEM part number. What it does:

• Replaces the factory component associated with the listed OEM number
• Restores the original fit, form, or function when the matching part is installed
• Helps address symptoms caused by a failed or damaged component when it matches the appliance's PN
• Use only if your appliance requires part number 99150418

• One replacement part as listed by the OEM

• Verify the OEM part number on your appliance before ordering
• Disconnect power to the appliance before attempting service
• Follow all OEM instructions and safety warnings when installing

This listing is for a Broan replacement part that is currently unidentified in our catalog. Order only if you have confirmed this exact part number matches the component you need — it replaces the specific OEM piece shown by number. What it does

• Serves as a direct OEM-numbered component for Broan equipment when correctly matched by part number
• Used to restore the original function of the appliance when the correct part is installed
• Can address failures or missing components associated with the unknown part number when properly identified
• Useful for technicians or owners who have verified the part number on their unit

• Verify the part number on the appliance or service manual before ordering; this listing lacks a vendor description
• Disconnect power to the appliance before attempting service to avoid shock or injury
• Keep original packaging and labels until fit and function are confirmed

This replacement fan motor drives the blower that moves air through your ventilation system. Replace a failing motor to help restore proper airflow and reduce noise during operation. What it does:

• Spins the blower wheel/impeller to move air through the venting system
• Helps clear steam, smoke, and odors by maintaining consistent airflow
• Can address symptoms like a fan that won't start, just hums, runs slowly, or is unusually noisy
• Resolve overheating or a burning smell coming from the motor area

• 1 motor

• Disconnect power at the breaker before servicing
• Note wire locations and motor orientation for correct reassembly
• Ensure the blower wheel is secure and spins freely after installation
• Test run before final reassembly and check for vibration or rubbing

This is a replacement mounting nut that secures hardware and components on compatible Broan appliances, restoring proper fastener retention and preventing looseness. What it does

• Fastens and secures panels, brackets, or components in place
• Prevents vibration-related loosening that can cause rattling or misalignment
• Replaces missing or damaged thread hardware for safe, reliable attachment
• Used wherever the corresponding bolt/stud requires a matching nut to hold parts together

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct wrench or socket size to avoid stripping the nut or mating threads
• Thread the nut on by hand first, then snug with a tool; avoid overtightening
• Inspect mating bolt/stud and threads for damage; replace if stripped or corroded

This ballast transformer restores proper power regulation to the appliance lighting circuit so bulbs operate reliably and safely. Designed for use as a direct replacement to revive dim, flickering, or non-working range-hood/vent hood lamps. What it does:

• Regulates voltage to the appliance lighting system so lamps start and run consistently
• Helps eliminate dimming, flicker, or intermittent light failures tied to a faulty ballast
• Works with the hood's existing lamp sockets and wiring to restore normal lighting operation
• Supports service-level replacement where the original ballast has failed

• Service-replacement part — disconnect power to the appliance before starting work
• Handle carefully to avoid damage to terminals; secure mounting per original hardware

This is a direct replacement part sold under the manufacturer's part number for use with compatible ventilation and range hood products. It provides a like-for-like swap when the original component fails, restoring normal function. What it does

• Replaces a failed or damaged factory part to restore appliance operation.
• Prevents intermittent or complete loss of the related feature when installed correctly.
• Helps avoid makeshift repairs that can cause further damage or unsafe operation.
• Works only in models specified by the manufacturer for this part number.

• One replacement part as shown and labeled by the manufacturer.

• Disconnect power to the appliance before attempting any repair to avoid shock or injury.
• Use proper tools and secure fasteners to the manufacturer's specifications; do not force parts into place.

This electronic control module operates the hood's fan and lights so the range hood responds to user commands and runs reliably. Replaces a failed or unresponsive control to restore normal vent and lighting operation. What it does:

• Receives input from the hood's buttons or touchpad and activates fan speeds and lights
• Controls power to blower motor and lighting circuits based on user selections
• Can resolve symptoms like unresponsive controls, intermittent fan/lights, or loss of specific speed settings
• Works as the main interface between user controls and the hood's electrical components

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle the module carefully; avoid bending pins or exposing it to static
• Typical install requires removing the hood's access panel and unplugging the old module connector(s)
• Test all functions after installation and secure panels before returning the hood to service

This small replacement retainer secures a range-hood or vent component in place, restoring proper fit and preventing rattling or displacement. It's a simple, inexpensive part that helps keep panels, filters or grilles stable. What it does:

• Holds a grille, filter or small panel securely in its mounting location
• Keeps parts aligned to prevent gaps and air leakage
• Reduces vibration and rattling caused by loose fittings
• Helps prevent parts from falling or shifting during use

• High-level, trim-level replacement; typically installs with basic hand tools
• Disconnect power to the appliance before working near lights, fans or wiring
• Keep track of any screws or clips removed and note original orientation

Replacement rocker switch that restores manual control of the range-hood fan or light, providing straightforward on/off operation. Use this switch to replace worn, stuck, or non-responsive controls for safer, more reliable operation. What it does

• Replaces a failed or damaged rocker-style on/off control so the fan or light will operate when switched.
• Use when the hood fan or light won't turn on, the switch feels loose or sticks, or the control works intermittently.
• Fits into the original switch location and connects to existing wiring/quick-disconnect terminals.
• Restores simple user control without replacing the entire hood control assembly.

• One rocker switch.

• Always disconnect power at the breaker before servicing electrical components.
• Turn off power, label or photo the wiring for reference, then remove the old switch and attach the replacement to matching terminals.
• Secure the switch and restore power; test fan and light operation.

This replacement screw secures trim, panels, and internal components on compatible Broan appliances to restore a solid fit and reduce rattling or loose parts. Use it to replace missing or damaged fasteners and maintain safe operation. What it does:

• Secures mounting brackets, trim pieces, or internal assemblies
• Prevents panels from vibrating, rattling, or coming loose
• Restores proper alignment and fit of affected components
• Helps stop intermittent contact or movement that can cause noise

• Disconnect power to the appliance before servicing to reduce electrical and injury risk
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Keep removed hardware organized and reuse only matching OEM fasteners