Huskee / Husky Log Splitter Parts

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This air cleaner housing is a genuine MTD part, sold individually. This air cleaner housing can be used as a replacement part for lawn mowers and leaf blowers. The air cleaner housing provides a casing for the air cleaner so that it can shield the internal engine from dirt, debris, and pebbles. Check the air cleaner housing regularly to ensure that it is intact and no debris is getting into the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air cleaner housing is compatible with the following brands: MTD, Huskee, and Yard-Man.

The ignition coil is a standard part of internal combustion engines on lawn and garden equipment. This coil consists of the ignition plug, plastic housing, and metal wires that include a flexible plastic casing. The coil is responsible for connecting the spark plug and transmitting the current that creates the spark that allows the engine to fire. This coil may develop wiring problems or the rubber and plastic parts may become worn and damaged over time. This will require a full replacement of the assembly. It is a good idea to inspect the coil when changing the spark plug as a part of routine maintenance, as well. This genuine OEM ignition coil is compatible with lawn and garden equipment from Troy-Bilt, MTD, Yard Machines, Yard Man, HUSKEE, and Cub Cadet. It can be used on more than 150 lawn and garden machines, including lawn mowers, log splitters, and chipper/shredder models. This coil assembly includes the ignition plug, metal wires encased in plastic, and a plastic housing. The hardware required to install this part is sold separately, as are all other components. Be sure to wear gloves and allow the engine to cool before working on the ignition or other components.

This genuine replacement part is a fuel tank, also known as a fuel tank assembly. This part is the gas tank for a snow blower. This fuel tank holds gas, and is required for proper operation of a snow blower. A faulty or damaged fuel tank can leak gas, leading to improper or dangerous operation of the product. Shut off the snowblower, allow the engine to cool, and ensure the tank is empty before installation. Wear work gloves to protect the hands and work in a well-ventilated area during installation.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This part is compatible with a variety of MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Husky snow blowers. Please note: original part number 751-11201 is now obsolete, and manufacturer has replaced the original part number with this part.

This throttle return spring is a genuine MTD part, sold individually. This throttle return spring can be used as a replacement part in a snowblower or a log splitter. The purpose of a throttle return spring for one of these small engine outdoor appliances is to facilitate the opening and closing of the throttle in conjunction with the operator releasing or engaging the gas pedal of the appliance.If the throttle return spring can no longer facilitate the opening and closing of the throttle, the throttle return spring should be removed and replaced by this genuine OEM replacement part before the log splitter or snowblower is used again.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This throttle return spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, and Yard Man.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

This governor spring is a genuine MTD part, sold individually. This governor spring can be used as a replacement part in lawn mowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of a governor spring for these outdoor appliances is to facilitate the opening and closing of the throttle which helps the appliance maintain its even pace and speed while in operation.The governor spring in an outdoor appliance might have to be replaced if it loses its spring tension. This could occur as the result of a collision with a hard object or due to general wear and tear over long-term use. If this damage prevents the governor spring from serving its typical function, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This governor spring is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This is a hex head bolt 1/4 - 28 x .625. It is used to secure a device together for smooth and simple operations. With use and over time, the hex head bolt may be damaged or come loose and fall out. When the bolt is missing, the machine could fall apart or otherwise malfunction. Be sure to replace a missing or damaged hex head bolt.Allow the equipment to cool completely before starting the repair process. An Allen key or hex key will be required to loosen and remove any old or damaged bolts. The new bolt can then be inserted and secured tightly. Examine for other missing parts before starting the device.The hex head bolt 1/4 - 28 x .625 is an authentic OEM part. It is sold as an individual unit. It is made of rugged, durable, high-quality materials. The hex head bolt can be used in lawn equipment machines, including various models of tillers. It is compatible with MTD, Yard Machines, Yard-Man, Troy-Bilt, and Cub Cadet brands.