Huskee / Husky Log Splitter Parts

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This is a genuine replacement for the air cleaner thumb screw found on select engines used in lawn mowers. The thumb screw is a specialty part that is used to secure the air cleaner in a stable position. Over time, the screw can become damaged or worn because of the constant engine vibrations or exposure to high heat. This screw may also be lost during air filter replacements or other repair work. In either case, it should be replaced with a genuine part like this one to ensure the air cleaner remains secure and the machine can continue to be used. This genuine OEM thumb screw is manufactured by MTD and is compatible with several machines from the brand. It can also be used with models from Bolens, Yard Man, Yard Machines, HUSKEE, Cub Cadet, and Troy-Bilt. There are hundreds of compatible models that can use this thumb screw. The part is made of durable metal with a black plastic grip for easy installation with no tools required. This item is sold individually and does not include additional hardware or parts. Always allow the engine to cool completely and wear gloves when working on lawn and garden equipment.

This authentic OEM replacement part is a fuel line kit for a lawn mower. The fuel line is arguably the first stage in a combustion engine. Before the engine can ever start, fuel first has to come from the tank to the carburetor via the fuel line. The fuel line runs from the inside of a fuel tank and into the carburetor. It attaches to the side of the lawn mower using two small metal clamps. Fuel lines are almost always made of either vinyl or rubber and, because of their location on the outside of the lawn mower, they can easily snag on something and tear. If the fuel line tears, gasoline will begin leaking from the fuel tank and pose a potential fire risk. Fortunately, changing out a fuel line is easy. With a pair of needle-nose pliers, pull the damaged fuel line from the carburetor and out through the fuel tank. Reinsert the new line and clamp it down to the mower. This high-quality part is compatible with MTD, Cub Cadet, Yard Man, Troy-Bilt, Bolens, and Yard Machines lawn mowers. It is sourced from the original manufacturer and includes a hose and two metal clamps.

This ignition coil is a genuine MTD part, sold individually. A ignition coil can be used as a replacement part in a tiller or a log splitter. The purpose of this genuine OEM part for one of these outdoor appliances is to power the engine.The ignition coil in a outdoor appliance might need to be replaced at any point within the typical lifespan of the appliance. This could occur if the ignition coil assembly has been damaged, in which case it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This ignition coil is compatible with the following outdoor appliance brands: MTD, Yard Machines, Huskee, and Bolens.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

This governor spring is a genuine MTD part, sold individually. This governor spring can be used as a replacement part in lawn mowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of a governor spring for these outdoor appliances is to facilitate the opening and closing of the throttle which helps the appliance maintain its even pace and speed while in operation.The governor spring in an outdoor appliance might have to be replaced if it loses its spring tension. This could occur as the result of a collision with a hard object or due to general wear and tear over long-term use. If this damage prevents the governor spring from serving its typical function, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This governor spring is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This valve spring retainer is a genuine OEM replacement part that is designed for use with select snowblowers and snow throwers. The valve spring retainer is responsible for holding the valve spring in place, which then controls the valvetrain. The retainer secures the spring so that it can provide the right amount of pressure to ensure that the system can operate without valve b, which can damage the engine or cause faulty operation. If the valve spring retainer fails or is damaged, which can happen with regular use over time, it will need to be replaced to ensure the spring remains in place during the operation of the machine. The retainer is a metal collar-type piece and although it is durable, it could wear out or break due to several different potential situations. Regardless of the cause, a replacement must be made with an OEM part like this. This genuine part is manufactured to specific OEM standards by MTD, and is compatible with more than 150 units from MTD, Yard Machines, Yard Man, Troy-Bilt, Husky, and Cub Cadet. It is sold individually. Be sure to wear gloves and allow the unit to cool completely before performing any type of repairs.

This is an exhaust valve adjuster that makes up part of the engine in several types of lawn and garden equipment. It's made of durable metal and works with the valves in the tool. Whenever a valve opens, the exhaust valve adjuster moves the valve a small degree. The purpose of this is to prevent deposits of carbon from building up on the valve and the valve seat. Having cleaner valves helps drop emissions and can prevent guttering and burning of the valve seat and face.If the exhaust valve adjuster is damaged, it will need to be replaced. This involves taking the motor out of the equipment and pulling apart the engine. Store the parts so they will be easy to put back together later. Add oil to the exposed metal surfaces before taking out and cleaning the valves and heads. Remove the exhaust valve adjuster that is damaged and replace it with a new component.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The exhaust valve adjuster is compatible with lawnmowers, log splitters, and snowblowers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Yard-Man, and Huskee.

This is an oil dipstick assembly that is a crucial part of many types of lawn and garden equipment. The dipstick is made of quality plastic and metal and is located inside the oil fill tube. The purpose of the part is to indicate how much oil is currently in the engine. Regular use can cause this component to wear out or become damaged over time. When this occurs, it's not possible to determine how much oil is present so the oil dipstick assembly will need to be replaced.Replacing the oil dipstick assembly is a simple and quick process. No tools are needed to make the replacement. Turn off the equipment and access the oil fill tube. Unscrew and remove the old oil dipstick tube before replacing it with the new component. The equipment can then be used as normal.This oil dipstick assembly is a genuine OEM replacement part that is directly sourced from the manufacturer. The part is sold on an individual basis. This component is made for use with lawnmowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers created by MasterCut, Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This is a starter recoil assembly. It is used when starting small lawn equipment and other machines. It engages the flywheel. With time and use, any or all of the recoil can wear out or become damaged, including the spring, housing, rope, or pulley. If something is damaged or worn out, the entire starter recoil assembly must be replaced. Signs that the part requires a repair include an engine that won't start or has difficulty engaging.Replacing a starter recoil assembly is easy and can be done in about 15 minutes. A nut driver and screwdriver are required for the repair. Wear gloves. Make sure the equipment is completely cooled before beginning the recoil assembly replacement. After putting tension on the spring and pulley, hold the housing securely to prevent it from releasing.The starter recoil assembly is a genuine OEM-authorized replacement part. It is sold individually. The starter recoil assembly is compatible with MTD, Cub Cadet, Yard Machines, Husky, Yard-Man, and Troy-Bilt brands. It is a complete part that includes the housing, rope, pulley, and recoil spring. It works with small engines, lawnmowers, log splitters, trimmers, and other similar equipment.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.