Huskee / Husky Snow Removal Equipment Parts
Genuine Mtd part
By: Mtd
Part Number: 784-5580-0637
Replacement skid shoe for snow blowers. Mounts to the side of the auger housing to protect surfaces and control clearing height. Replace when worn.
Do-It-Yourself Stories from Customers like You
Worn out parts Allen M. • Beloit , WI • June 29, 2018
Repair went well.
Read more
More
$25.75
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 946-04397A
Speed select cable for snowblower ground drive system. Replace if your cable is deteriorated, damaged, detached, or missing from the control assembly.
More
$22.66
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 710-0599
Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.
More
$5.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 720-04122
Wing knob for lawn mowers and snow blowers. Secures chutes, bagger frames, and adjustable components. Replace if cracked, broken, or missing.
More
$8.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 731-08171
The shave plate is a common snowblower part that attaches to the back of the blower housing and directs snow into the auger and blade assembly so it can be cleared. The particular layer of ice and snow this blade is removing is the hardest and heaviest part of the snowfall. The shave plate is also called the scraper bar or scraper blade.
Periodically, because it is in direct contact with the concrete surface below the snow, the shave plate wears out and must be replaced. A shave plate may be worn, gouged, or sliced so it does not smoothly remove the snow from the sidewalk. Replacing the shave plate is a simple task that can be accomplished in 30 minutes or less. The shave plate is connected to the blower housing by four adjustable fasteners that are removed.
This genuine OEM replacement part is manufactured by Genuine MTD. It is compatible with a great variety of snowblowers, including Husky, Troy-Bilt, Yard Machines, MTD, Cub Cadet, and Yard-Man. This OEM part is sold individually.
More
$20.60
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 951-11571
Seals between carburetor and engine block to prevent air and fuel leaks. Replace if engine runs rough, leaks gas, or loses power. Verify fit by model.
More
$7.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 710-04484
Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.
More
$4.70
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 710-0627
Hex screw for lawn mowers, tractors, and snow blowers. Replaces worn, corroded, or missing screws on engines and housings. Identical fit for secure assembly.
More
$4.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 714-04043
Split pin fastener for lawn tractors and outdoor power equipment. Secures axles, linkages, and moving parts. Replace when bent, missing, or corroded.
More
$5.46
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 732-04460
Extension spring that mounts the drive plate assembly to the housing frame on snowblowers. Replace if broken, stretched, or missing for secure mounting.
More
$7.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 756-04224
This part is an idler pulley. The idler pulley applies tension to and guides the engine drive belt. A wrench set is needed to perform any repair involving the idler pulley part.The idler pulley can become worn over time with normal use. Wear to the pulley can cause the belt to slip. Signs that the idler pulley needs to be replaced include squealing noises coming from the equipment, the engine stalling, or overheating. The idler pulley is an essential component and it is important to replace this part if it becomes worn, broken, or damaged in any way.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This idler pulley is compatible with lawn tractors and snowblowers manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky.
More
$29.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 790-00119-0637
30-inch shave plate blade for snow throwers. Installs at the auger housing base to protect surfaces. Replace when worn, cracked, or damaged.
More
$42.05
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 931-0484A
Black plastic wheel hub cap for lawn tractors and riding mowers. Replaces cracked, broken, or missing hub caps. Snaps onto wheel hub for a finished look.
Do-It-Yourself Stories from Customers like You
Front tire came off lawn mower Robert B. • Hutsonville , IL • June 30, 2019
Ordered parts and they were an exact fit easy fix.
Read more
More
$7.38
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 941-0245
Auger bearing flange connects to the bearing to reduce friction during operation. Replace if worn or damaged to restore smooth auger rotation. Verify fit.
More
$11.33
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 684-04250
Pivot rod for gas snow throwers. Connects control lever to moving components. Replace if bent, broken, or worn to restore proper mechanical operation.
More
$14.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Mtd part
By: Mtd
Part Number: 710-0134
Metal carriage bolt with round head and threaded shank for lawn mowers and snow blowers. Replaces broken or missing hardware during repairs or assembly.
More
$4.95
IN STOCK
Most orders arrive by Wednesday, November 25