Huskee / Husky Tiller Parts

This governor return spring is an essential part designed for use with outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a tiller, a leaf blower, and a wood chipper. It is compatible with products by brands such as Cub Cadet, Yard Machines, MTD, Huskee, and Yard-Man.The purpose of the governor return spring is to apply tension to the throttle, which in turn controls the speed of the engine. Over the life of the machine, many components, such as the governor return spring, undergo normal wear and tear. The most common reason for replacing the governor spring is when it is worn out or broken. Signs and symptoms that it is time to replace the governor return spring include deterioration that is causing the engine to over-speed or run improperly. The replacement or repair process of the governor return spring should be straightforward, though the user should plan on using needle nose pliers for the replacement process. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This governor return spring is made out of metal. This governor return spring is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This left hand tine assembly is a genuine MTD part, sold individually. This left hand tine assembly can be used as a replacement part for a tiller. The purpose of the left hand tine assembly for a tiller is to attach to the appliance and break up clumps of soil into loose dirt so the surface area can be used for planting and gardening.The left hand tine assembly of a tiller might have to be replaced if the tines on the left side of the tiller are damaged, broken, or worn out from general wear and tear with long-term use. If the tines are bent, warped, torn, or otherwise damaged, this component should be ordered as a complete replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This left hand tine assembly is compatible with the following outdoor appliance brands: Husqvarna, Cub Cadet, Yard Machines, Huskee, and Yard-Man.

This replacement part is a stud. This is a genuine replacement part made by MTD. This part is commonly used inside the engine and works with the cylinder to ensure that the different parts in the machine are running smoothly and effectively.A new stud might be needed if the current one is missing or damaged in any way. This can include being dented, cracked, or bent. It is common that after years of normal wear and tear this part can need replacing. Be sure to wear work gloves while replacing this part as other parts around it can cause injuries.Reference the equipment's manual to ensure a proper repair. This stud is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part made for long-lasting use.

This tap hex screw is a genuine MTD part, sold individually. A tap hex screw can be used as a replacement part for outdoor appliances including lawn mowers, tillers, and edgers. This is a small fastener.The tap hex screw for one of these outdoor appliances might be subject to damage or to a loss or misplacement that can necessitate the full replacement of the screw. Refer to the manual for detailed instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This tap hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This part is a replacement carriage bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective, lost, or stripped carriage bolt outdoor power equipment.Bolts are standard pieces of hardware that can be used in many different areas and with many different types of equipment. Bolts can become stripped, corroded, loose, or lost and will require replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular carriage bolt, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This carriage bolt can be used with a variety of leaf blower models manufactured by MTD, Craftsman, and other brands.

This replacement part is a nut. This is a genuine replacement part made by MTD. Nuts are small but typically an important part of many different machines. These parts allow for pieces of the machine to stay secure and in place during use. Nuts usually work with other small parts such as screws and washers to ensure the proper functioning of the machine.A new nut might be needed if the current one is visibly missing or damaged. These parts can become worn down over time due to normal wear and tear. If this is the case it is recommended that it be replaced as soon as possible. This repair should be fairly easy and only require common household tools. Be sure the engine is completely cooled down before attempting to replace this part.This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This part is a replacement shroud spacer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken shroud spacer in outdoor power equipment. Spacers ensure that equipment doesn't overheat or vibrate excessively by preventing too much friction from forming between moving components. They are essential to safe and proper functionality and should be replaced when no longer effective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this shroud spacer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this shroud spacer is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a compression spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Compression springs are found in a wide variety of machinery and are an important piece in many different engines. Typically the compression spring joins to different parts together so that the engine can function properly. A new compression spring might be needed if there are parts inside of the engine that are not running properly. The compression spring is one of the many small parts that allow the engine to run smoothly and efficiently. Be sure the engine is completely cooled down and powered off before starting this repair. This compression spring is sold as one piece but the appliance may require more than one for operation. This part is a genuine OEM replacement part sourced directly from the manufacturer.

This dipstick assembly is a genuine MTD part, sold individually. This dipstick assembly can be used as a replacement part in a lawn mower or a tiller. The purpose of a dipstick assembly, otherwise known as an oil dipstick assembly, in a lawn mower or a tiller is to allow the user to check oil levels in the appliance.If the oil has just been refilled and the dipstick assembly does not read this, or if the oil is empty and the dipstick reads that the oil is full, the dipstick assembly should be removed and replaced by this genuine OEM replacement part. This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This dipstick assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, Huskee, and Yard Man.

This replacement part is a fuel tank. It is a genuine replacement part made by MTD. This fuel tank is usually found in appliances that use fuel and engines to operate. The fuel tank is responsible for holding the fuel before the carburetor uses it to start the engine during use. A new fuel tank might be needed if the user notices that the current tank is cracked, punctured, or otherwise damaged. This can be due to normal wear and tear. It is recommended that the user wear gloves during this repair as the fuel tank can still be full. This fuel tank is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.