Huskee / Husky Tiller Parts

Replaces worn, cracked, or damaged 8-inch wheels on walk-behind lawn mowers. Restores smooth rolling and maneuverability for easier operation.

This part is a replacement handle plug. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle plug in tillers.This handle plug ensures that the opening at the end of the handle is sealed properly. This part can easily become worn, detached, or lost and thus will require replacement with a genuine part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle plug, the appropriate owner's manual and equipment diagrams should be referred to. This handle plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

Flat washer for lawn mowers, tractors, tillers, and snow blowers. Replace if worn, damaged, or missing to ensure proper fastener spacing and tension.

Flat washer for rear-tine tillers. Provides secure fastening and even load distribution. Replace if washer is cracked, bent, or missing.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

Can't shift gears on your tiller? A worn or broken shift rod prevents proper gear engagement. This replacement rod restores smooth shifting control.

Depth stake tube for front-tine tillers. Installs to measure tilling depth. Replace if bent, cracked, or missing for accurate depth control.

This is a cylinder assembly that is designed for use in various lawn and garden small engines. The cylinder assembly is a component of the starter assembly and engine. Problems with engine compression are usually the result of the cylinder assembly going bad and needing to be replaced. If the cylinder assembly is not working, the engine may not work at all. One test of the cylinder assembly is to cover the cylinder hole with a finger and pull the starter rope. If the cylinder is not working correctly, no air will come through the hole.If the cylinder assembly is not functioning, it needs to be replaced. The engine will need to be taken apart to get access to this assembly so that it can be removed and replaced. This repair requires work gloves and a basic toolset. Never work on hot engines and make sure the spark plug is removed before working on the machine.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder assembly is designed to fit blowers, cultivators, edgers, trimmers, and vacuums manufactured by Ryobi, Troy Bilt, MTD, Yard Machines, and Bolens.

An idler pulley is an essential part of many small and medium sized gasoline powered tools. This idler pulley is used in equipment such as tillers, lawn tractors, log splitters, edgers, snow blowers, and trimmers. The idler pulley is necessary so that the engine can run without the tool's moving parts being engaged. For instance, a lawn tractor running without the cutting blades turning or the wheels rolling. Once the idler pulley is engaged, the blade begins to turn. There is a great deal of resistance encountered by the idler pulley each time the equipment's tools begin to turn. Over time, the pulley can become worn and will eventually need to be replaced. If there is a squealing sound whenever the moving parts of a lawn tool are engaged, it is probably a sign that the idler pulley is about to fail. The pulley itself is attached to the engine housing with 9/16 hex bolts and requires an adjustable wrench and 9/16 ratchet to remove and replace. Always use a genuine OEM manufactured replacement part such as this one when replacing the original, as this part is identical to the original. This part is compatible with equipment manufactured by Bolens, MTD, Cub Cadet, Huskee, and Troy Bilt.

Fix tiller belt slipping or drive issues with this replacement drive pulley. Essential component for power transmission in rear-tine and standard tillers.

This is a genuine OEM engine pulley sourced directly from the manufacturer for use on tiller engines and other engines with a pull start. The starter cord is attached to a pulley that has a spring for rewinding the cord after the engine starts. If the engine pulley is damaged due to rust or corrosion and the string won't pull, the engine won't start. The pulley may make screeching or whining sounds when pulled, this is one way to recognize that the pulley is beginning to go bad and should be replaced soon.Before replacing the pulley, make sure the engine is cool and remove the spark plug. Remove the starter housing to access the rope starter and pulley. Disassemble the pulley system and discard the old pulley. Reinstall the new pulley and thread the starter cord back around it. Reassemble the housing and put the spark plugs back so that you can test the starter. This engine pulley is made of heavy-duty steel and sold as an individual unit. It is designed to be compatible with small engines manufactured by Craftsman.

Tiller won't engage or belt slips? This engine pulley outer half works with the inner half to drive the tines. Moderate DIY repair for tillers.

Protective shield that houses and covers the rear tines on your tiller. Replace if cracked, punctured, dented, warped, or missing for proper safety.

Air filter cleaner for gas trimmers and tillers. Replace when clogged or engine runs rough to restore performance. Confirm fit with your model number.