Huskee / Husky Tiller Parts

This fuel tank assembly can be used as a replacement part for the small engine of a snowblower or a tiller. The fuel tank assembly contains the fuel tank as well as the parts required to install the part. The purpose of the fuel tank is to store fuel for the engine and dispense the fuel in order to power the engine.A fuel tank assembly might be ordered as a complete replacement part if the fuel tank and its components suffer damage. This damage might manifest in the form of fuel leakages from punctures, holes, or corrosion to the material. If this damage affects the fuel tank and its components, it should be removed and replaced before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This fuel tank assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Cub Cadet.

This shaft wheel pony is a genuine MTD part, sold individually. This shaft wheel pony can be used as a replacement part in a tiller. The purpose of a shaft wheel pony in a tiller is to function as a fully assembled shaft with hardened steel worms which connect the blades of the tiller to the motor of the tiller so that the blades can be rotated and cut through the soil.The shaft wheel pony in a tiller might have to be replaced if the shaft suffers irreparable damage in the form of puncturing, denting, cracking, scraping, eroding, or warping to the point of reduced or no functionality. If this occurs, the shaft wheel pony should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the tiller for the operator. This replacement should be facilitated in accordance with the proper set of instructions sourced from a relevant appliance handbook or manual.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This shaft wheel pony is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Huskee, Yard Man, and Yard Machines.

The recoil starter assembly is comprised of the housing, the recoil spring, the starter pulley, the starter rope, and the plastic starter grip. It creates the motion that spins the flywheel to engage the engine. The grip is pulled, which extends the rope and activates the starter spring, which then engages the starter pulley and the flywheel, respectively. Over time, various components of the recoil starter can become damaged or worn with regular use. This is often going to require a replacement and in most cases, it will be easier to replace the entire assembly than a single component. This genuine OEM recoil starter is manufactured by MTD and is made to exact standards. It can be used with more than 150 MTD engines on lawn equipment, including from brands like Craftsman, Bolens, Yard-Man, Yard Machines, Remington, Husky, RYOBI, and Cub Cadet. This replacement assembly includes a limited parts warranty and includes all components: the plastic housing, starter pulley, pull rope, starter grip, and starter spring. The hardware for securing this housing is sold separately.

This shaft assembly is a genuine MTD part, sold individually. This shaft assembly can be used as a replacement part in a tiller. The purpose of the shaft assembly in a tiller is to provide a shaft upon which the tines can affix so that the tiller can be used to bore into the soil and loosen it for proper gardening and planting.The shaft assembly in a tiller might need to be replaced if it can no longer keep the tines properly affixed or that it suffers enough damage to render it beyond functionality. The shaft assembly could suffer this damage as a result of general wear and tear over long-term use, from a direct impact collision with a hard object such as a rock or a curb, or from exposure to the elements. If this damage occurs, the shaft assembly should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This shaft assembly is compatible with the following outdoor appliance brands: MTD, Ryobi, and Craftsman.

This replacement part is a sprocket assembly intended for use in lawn equipment. This is a genuine replacement part made by MTD. This part ensures that gears and wheels are functioning properly.A new sprocket assembly might be needed if the current one is damaged or broken in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This flange bolt is a genuine MTD part, sold individually. This flange bolt can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers. The purpose of a flange bolt is to serve as a fastening component, in conjunction with a nut, so components can be secured and affixed to one another over time.The flange bolt might have to be replaced at some point within the standard lifespan of the appliance if it is lost, misplaced, or damaged. The flange bolt can be gradually stripped over time, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flange bolt is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, Craftsman, Yard-Man, Yard Machines, MasterCut, and Huskee.

This brake assembly bolt is a genuine MTD part that is manufactured to be a replacement part for lawn tractors, push walk-behind mowers, log splitters, trimmers, chippers, shredders, and other engines.On engines such as these, the brake assembly helps work the brake, which stops the engine and any forward motion. It is not abnormal for brake assembly bolts to become worn over time and need to be replaced. This brake assembly bolt is designed for use with machines made by Black Max, Craftsman, Columbia, Cub Cadet, Huskee, Husky, Mastercut, MTD, Remington, Yard Machines, and Yard-Man. It is a genuine OEM part sourced directly from the manufacturer and is sold individually.

This genuine replacement part is a self-tapping screw. A self-tapping screw is a small screw that taps into place with relative ease. Lawnmowers have many screws that secure a variety of different parts. Whether they hold the housing of the various mechanical components or are used as mounting screws for other various parts, self-tapping screws are essential in holding all the different parts of the mower together. Over time, self-tapping screws that are exposed to the elements can rust and deteriorate. If they become too damaged, they might no longer do their job effectively and will need to be replaced. Luckily replacing these screws is a very simple process. To replace the screws, simply unthread the damaged screws and replace them with the new self-tapping screws. If the screws are stripped or too corroded to be removed, consider prying them out with a screwdriver or using a pair of needlenose pliers to rotate them out of their position. This OEM part is sold individually and is compatible with MTD brand mowers.

This is a carburetor stud for a lawn mower or tiller engine. A carburetor stud enables the carburetor to stay sealed to the intake manifold. They prevent threads from stripping in the metal manifolds and keep the carburetor perfectly aligned. This is an OEM part sourced directly from the manufacturer and is sold individually. When cleaning a carburetor, the user will need to remove the studs. Do not use vice grips when removing a stud, as this will strip the threads. A trick is to put two nuts on the threads and then hold a wrench behind the back nut. Tighten the closest nut, and then use another wrench or impact gun to reverse the stud out. This also works in reverse for replacing it with a new stud to properly place the carburetor so that it seals to the manifold.This part is compatible with several brands, including Bolens, Cub Cadet, Husky, Troy-Bilt, Yard Machines, and Yard Man.

This replacement part is a spur gear. This is a genuine replacement part made by MTD. This small gear is very common in different types of machinery and appliances. There are ridges around the edge that allows it to be connected so that energy is created inside the engine.A new spur gear might be needed if the user notices unusual noises coming from inside the engine. This can mean the spur gear is no longer able to lodge into place and assists in turning other gears. It is common for spur gears to become worn down over time and need to be replaced. Refer to the proper user manual for more information on how to replace this part.This part is a genuine OEM replacement part to ensure proper fit and long-lasting use. This part is sold individually and is sourced directly from the manufacturer.