Husqvarna Chainsaw Parts

Replace your chainsaw's carburetor when the original is cracked, leaking, or damaged. Mixes air and fuel for proper engine operation. Direct fit.

If your chainsaw is leaking bar oil or you can't check oil levels, the oil tube may be cracked or disconnected. Simple repair with basic tools.

Filters contaminants from fuel before it reaches the carburetor. Replace if clogged, engine runs poorly, or won't start. Verify fit with your model number.

Replace your chainsaw's idler gear to restore proper drive system function. Essential when gear teeth are worn or damaged. Verify fit with your model number.

If your chainsaw chain is loose or won't tension properly, this bar adjuster screw restores proper chain adjustment. Simple fix in under 15 minutes.

Replacement bar adjustment pin for chainsaw clutch cover assembly. Connects adjustment screw to guide bar for chain tensioning. Replace if missing or broken.

Replacement rear handle for chainsaws. Installs at the back of the saw body to provide grip and control. Order when your original handle is cracked or broken.

Replacement rear isolator spring for chainsaws. Reduces vibration and absorbs shock during operation. Replace if broken, worn, or causing excessive vibration.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Replacement flywheel assembly for gas chainsaws. Mounts to the crankshaft with magnets that generate ignition charge. Replace if cracked or damaged.

This lever control is a genuine Husqvarna part, sold individually. This lever control can be used as a replacement part for a lawnmower. The lever control regulates the throttle of the lawnmower so that the engine remains activated when the lever is engaged, and the engine is shut off when the lever is disengaged.If the engine is not responding to the lever control in any of its settings, it is likely that the lever control has suffered damage and should be replaced. If the lever control, upon a visual inspection, seems to be punctured, torn, scraped, eroded, or damaged in some other way as a result of general wear and tear over long-term usage or from a direct impact with a hard object, the lever control should be removed and replaced with this genuine OEM replacement part before using the lawnmower again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This lever control is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

Fix fuel leaks or engine flooding on your riding mower with this fuel check valve. Controls fuel flow between tank and carburetor. Easy DIY repair.

This clutch drum is a genuine Husqvarna part. This clutch drum is a genuine OEM sourced part from the manufacturer. It includes the clutch drum and bearing kit and also includes the needle bearing. This Husqvarna clutch drum is designed for a 2-cycle engine clutch. The clutch allows the speed of the chainsaw to engage and change. It is normal for the clutch to wear out over time. It will be apparent when it is time to replace the clutch, as the engine won't turn on and the chain will not rotate. It is manufactured for compatibility with several models of Husqvarna chainsaws, including (but not exclusively) many in the 340, 350, 440, and 450 series. It is also compatible with the Craftsman 358382000 chainsaw. It may be compatible with other makes and models as well, including RedMax, Poulan/Poulan Pro, McCulloch, Weed Eater, AYP, and Jonsered.

This is an assembly knob that is installed on many Husqvarna chainsaws. The purpose of the assembly knob is to offer a comfortable grip when adjusting the chain tension on the chainsaw. It is located near the chain on the tool and is made of durable plastic. This part can become damaged, experience wear, or be lost and will need to be replaced. If the component is missing or broken, it will be more difficult to adjust the chainsaw's tension.If the assembly knob needs to be replaced, the chainsaw should be turned off and placed on a stable surface. The spark plug wire should be disconnected for safety purposes. The replacement process will require the use of a screwdriver. Work gloves will also be useful to protect the hands. The original assembly knob can be removed with a screwdriver before installing the new part and operating the chainsaw as usual.This replacement part is made to be used with various chainsaws manufactured by Husqvarna. It is a genuine replacement component that is directly sourced from the manufacturer. The assembly knob is sold as an individual part.

Replacement blade holder for riding mowers and lawn tractors. Securely mounts and holds the cutting blade to the spindle assembly. Replace if cracked or worn.

Note: This is ONE blade.