Husqvarna Lawn Mower Bearing Parts

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

This genuine OEM part is a bushing for lawnmowers. The bushing is the plastic piece that goes into the wheel, allowing it to turn smoothly. If the wheels of the mower are no longer turning smoothly, the bushings might need to be replaced. Luckily, replacing a bushing is a relatively simple task.To replace the bushing, start by removing the wheel assembly from the mower. Unfasten the bolts that secure the wheel. Once removed, locate the old bushing and slide it out of its place. Slide the new bushing into the proper position. Reinstall the wheel assembly and make sure the bolts are tightened securely. Once secured, test to see if the wheel is rolling smoothly. If it is, then the installation was a success.This replacement part is sold individually and is compatible with Husqvarna brand lawnmowers.

This genuine Husqvarna replacement part is a steering bushing kit for use with lawn tractors and riding lawn mowers. A properly functioning steering bushing is essential for the safe and reliable use of a lawn tractor or riding mower. The steering bushing holds the steering wheel shaft on the steering boot. The steering bushing may become worn out or damaged with extended use, necessitating replacement. Remember to check the steering bushing periodically to spot any wear or damage. This part is an identical replacement for a steering bushing that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. A screwdriver is required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is made of durable material, and includes the bushing and two screws. Please note: original part numbers 1554J, 532155105, 155105 and 532124720 are now obsolete, and manufacturer has replaced the original part numbers with this part.

This steering bushing is a genuine MTD part, sold individually. This steering bushing can be used as a replacement part in a lawn mower. The purpose of the steering bushing is to mitigate and prevent the excessive vibration and shocks that could result from the steering wheel during the operation of the lawn mower.The steering bushing in a lawn mower might have to be removed and replaced by this genuine OEM replacement part if it can no longer serve its function of minimizing vibration. It is a simple replacement process that will require only basic tools to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steering bushing is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, Ariens, and Dixon.

This is an auger shaft bearing that is used on many snowblowers created by Husqvarna. The auger shaft bearing connects to the auger plate. A bearing helps the shaft rotate easily inside of a snowblower. Through use or time, the auger shaft bearing can become damaged or break and will need to be replaced. If the bearing is damaghed, it can cause vibrating, wobbling, or binding and may prevent the shaft from rotating. Failed bearings also sometimes create a squealing sound coming from the snowblower.If any of these things are occurring with a snowblower, the auger bearing will need to be replaced. Place the blower on a flat, stable surface and disconnect the spark plug wire before beginning. The belt cover and auger belt will need to be removed along with the roller bracket. Remove the auger housing to get access to the auger shaft bearing to replace it. Reassemble the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual unit. The auger shaft bearing is made to be used with several snowblowers manufactured by Husqvarna.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.