Husqvarna Lawn Mower Spring Parts

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. This part secures various internal components while allowing for some flexibility in placement. The spring in a lawn mower might have to be replaced if it can no longer secure internal components.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This part is a replacement brake return spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective brake return spring return in a variety of lawn tractor models.The brake return spring allows the brake itself to release. This part attaches to the brake lever and is essential for the safe use of the lawn tractor. Springs such as this one will need to be replaced when stretched, snapped, corroded, or no longer effective. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this brake return spring, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this brake return spring is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This genuine OEM replacement idler return spring is located in the lower deck of a lawn mower or lawn tractor and helps to secure the idler pulley in place. While a lawn mower is in motion, the parts of the lower deck can shift with inertia. To keep the idler pulleys securely positioned to the belt that drives the blade, manufacturers connect the pulley to the outer frame of the deck with an idler return spring. Springs slowly lose tension over time, and if the spring becomes too loose, the pulleys can become unsecured from their place on the lower deck. Replacing an idler return spring is an easy fix and should only take a few minutes. Simply lower and remove the deck, take out the worn-out spring, and replace it with the new. We recommend wearing gloves and using caution as the old spring may still have enough tension to flex back on your hands. This replacement idler return spring will work with lawn mowers from Ryobi, Jonesred, Husqvarna, Poulan and Weed Eater. It is a high-quality part sourced from its original manufacturer and ships individually.

This is a genuine replacement brake spring that is designed for use with select snowblower units. The brake spring is connected from the idler pulley to the frame assembly. This provides the tension for the brake on the snowblower, allowing the brake to function correctly. Over time, this spring can become worn and stretched and need replaced. There may also be impact damage or other situations where the spring could break. Regardless of the cause, a broken brake spring needs replaced immediately for safe operation of the machine. It is important to disconnect the power and wear gloves when performing repairs on snowblowers, and especially when working near the blades. Disconnect the old spring, hook the new spring through the proper holes, and then reconnect the power and start the machine to test the brake.This genuine OEM brake spring is manufactured to exact standards by Husqvarna. It can be used in select snowblowers and throwers from Husqvarna, Poulan, and Jonsered. This is sold as an individual piece and does not include any hardware or other parts. The brake spring repair will require a screwdriver, pliers, and adjustable wrench.

This torsion spring is a genuine Husqvarna part, sold individually. This torsion spring can be used as a replacement part in a lawn mower. The purpose of the torsion spring in a lawn mower is to store mechanical energy through the steady maintenance of spring tension such that it can deliver an equal amount of force in the opposite direction when twisted.The torsion spring could suffer from general wear and tear over long-term use or could be rendered broken after a collision with a hard object. If this occurs, the torsion spring should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This torsion spring is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Poulan Pro, and Craftsman.

This part is a replacement torsion spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective torsion spring in lawn mowers.This torsion spring is what enables the mower's deflector shield to be easily moved up and down. Springs are subject to wear and tear and may become stretched, rusted, corroded, or snapped, requiring replacement. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this torsion spring, the appropriate owner's manual and equipment diagrams should be referred to. This nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn mower models that have been manufactured by Husqvarna, Poulan, and other brands.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This replacement part is a compression spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Compression springs are very important in many different types of appliances. Springs use forces to allow the engine and other parts to operate smoothly during use.A new compression spring might be needed if the current one is missing or damaged in any way. This can include being bent or cracked. Due to the nature of their use, compression springs can become stripped over time and should be replaced when this happens. It is not unusual for springs to snap under pressure from overuse. It is recommended to refer to the user's manual before replacing this part. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. This compression spring is sold individually and is sourced directly from the manufacturer.