Husqvarna Lawn Mower Spindle

This is a greaseable mandrel kit, also called a blade spindle assembly. It is the part of a riding lawnmower where the blade assembly fits. It's attached to the bottom of the engine with four self-tapping screws, which assure the stability of the spindle when the blades are turning. The mandrel assembly is a part of the riding mower that is intentionally meant to be the most breakable. This is by design, so the other, more expensive, more challenging to repair parts are spared. As a result, mandrels often need to be replaced. If you have to replace the mandrel, first take off the blade assembly and the mandrel cover. After removing the nut holding the pulley in place, remove the pulley. From there, it’s just a matter of unscrewing the four bolts holding the mandrel to the cutting deck. Replace the original mandrel with the new unit and walk back through the disassembly instructions. This is a genuine OEM part manufactured by Husqvarna and Poulan. The mandrel is also compatible with Ariens, Dixon, and Craftsman. This OEM part is sold individually.

This is a replacement mandrel assembly used for mowers. The mandrel assembly is one of the most important parts of the machine. This is the part that houses the shaft that the mower blades attach to. The mandrel assembly is mounted to the deck of the mower. The mandrel assembly is made from metal and it tends to be durable. However, it may need to be replaced at some point for any number of reasons. There could be corrosion, or it might no longer be functioning properly because of damage. Regardless of the reason the assembly is not working properly, it will need to be replaced to ensure the machine has full functionality. The replacement is relatively simple to do, but it should be noted that the bolt holes do not come tapped. The genuine OEM replacement part is high-quality and is sold individually. It does not come with the four bolts that will be needed to attach it to the deck. This part is used for lawn mowers and riding mowers. The brands compatible with the part include Craftsman, Husqvarna, and Poulan.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.