Husqvarna Lawn Mower Deflector & Chute

This replacement part is a deflector shield. It is a genuine replacement part made by Husqvarna. This deflector shield works with the bagging chute so that the leaves and other debris end up in the proper place. This deflector shield is made of durable plastic so that it lasts a long time after replacement. A new deflector shield might be needed if the current one is damaged or broken in any way. This can include being cracked or dented. If the deflector is unable to connect to the main parts of the mower it might be time to replace this part. Reference the specific user manual for more detailed information on how to begin this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part. This deflector shield is sold individually.

This is a shield deflector, or a grass deflector, that is used on certain models of lawn tractors and walk-behind lawn mowers. The shield deflector is designed to ensure that the debris that expels from the mower deck is not projected upward or toward the person that is mowing. When it is cracked or missing, the clippings and debris could fly out in any direction and cause injury or damage. The shield deflector is made of durable plastic but it is also subject to constant vibrations and ground impact, which can lead to damage. Replacing a broken shield deflector will ensure that the mower is safe to use and that debris is not flying in all directions. This part will require a wrench or socket, as there are two screws or bolts holding it in place. This genuine OEM deflector is manufactured by Husqvarna and can be used with select machines from the brand, as well as certain models from Craftsman, Poulan, and Jonsered. It is sold as an individual part and the hardware to secure the deflector is sold separately.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

A clipping deflector is a lawnmower attachment designed to guide and direct grass clippings away from the equipment itself. When attached, it allows the lawnmower to transform into a side discharge tool. It is made from flexible plastic material. If it develops cracks and holes or its attachment hooks break, the clipping deflector needs to be replaced. It is a quick and straightforward process that requires no tools. The deflector is located beneath the mulch door. Simply hold the mulch cover and lift it up. Use your other hand to pull the broken deflector away from the mulch cover hinge pin. Then, attach the new deflector's tab into the mulch's hinge pin. Lastly, lower the mulch cover to its original position. This brand-new, OEM Husqvarna clipping deflector replacement is explicitly made for Craftsman and Husqvarna lawnmower models. This replacement part is sold individually.

This part is a replacement mulching plug. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken mulching plug in various lawnmowers. The mulching plug is installed in the lawnmowers discharge chute and allows the user to switch the mower into mulching mode. In mulching mode, grass clippings will be turned into mulch and expelled, which can provide the lawn with extra nutrients. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this mulching plug, the appropriate owner's manual and equipment diagrams should be referred to. This mulching plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawnmowers that have been manufactured by Husqvarna and Poulan.

This genuine Husqvarna rear skirt provides protection from grass clippings and debris that could fly from underneath the lawn mower during use. Periodic inspection of the rear mower skirt for cracks and damage is an important safety measure for lawn mowers. Do not attempt to remove or install the rear skirt when the lawn mower is running. For models with clip-fasteners: Use a flathead screwdriver to remove the old skirt from the lawn mower. Line the new skirt up and reinstall the clips. For models with screw fasteners: Remove the screws holding the skirt in place, set screws aside for reuse. After removing the old rear skirt, clean the area to remove any dirt or debris. Flush installation is important in preventing debris flyout. Line the holes on the new skirt with the holes on the lawn mower. Reinstall screws and tighten. Dispose of the old skirt. The OEM skirt is made of high-quality, molded, composite black plastic. The unit is sold individually. This rear skirt does not include fastening clips or screws. Reuse fasteners on the current mower. This rear skirt compatible for use with Craftsman and Husqvarna push lawn mowers.

The chute is placed on the side of the snowblower or thrower where the snow will be expelled. The snow comes through the plastic chute and is moved out of the path the user is clearing. The chute can suffer from damage in a range of ways. If the user runs the snowblower into a hard obstruction beneath the snow, it can cause damage. In some cases, the chute might crack, or it might break entirely. If there is damage to the chute, it will not work correctly. It will then need to be replaced. This is a genuine OEM replacement chute for snowblowers and snow throwers. It is sold individually, and the hinge bracket and hardware to attach the chute are sole separately. This chute is compatible with several brands including Husqvarna, Poulan, Poulan Pro, and Craftsman. Buyers who are looking for a replacement chute must make sure that it will work with their make and model.