Husqvarna String Trimmer Parts

This replacement part is an ignition switch and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. The ignition switch is an important part of many different lawn mowers, as it allows the appliance to be turned on.A new ignition switch might be needed if the current one is damaged, broken, or if the key blade is snapped off in the ignition. If the user is unable to start the machine through the ignition switch, it is likely damaged or malfunctioning. It is possible for the ignition switch might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This is an authentic OEM replacement ignition module built specifically for Husqvarna lawn appliances. An ignition module, also known as an armature-magneto, is an essential part of a combustion engine's ignition. The ignition module creates pulses of high voltage electricity that the spark plug uses to generate a charge and start the ignition. Without a functional ignition module, the spark plugs and ignition will not engage. The most common reason for an ignition module to break is if the spark plugs have gone bad or are missing from the ignition. The charge generated by an ignition module is quite high, so if the spark plugs are not in place to receive the charge, the high voltage can fry and melt the module. If the spark plugs are not receiving a spark but can carry a charge, the odds are that the ignition module has been fried and will need to be replaced. To make this repair, use a wrench set and screwdriver. Although this high-quality replacement part is designed specifically for Husqvarna appliances, it may also work with some Jonsered appliances, too. It comes sourced from the original manufacturer and does not include any additional hardware.

This fuel line kit is a part used in gasoline-powered edgers and trimmers. It delivers fuel from the gasoline tank to the carburetor where it is mixed with air that has come through the air filter. The mix flows into the combustion chamber where it is ignited to turn the driveshaft of the tool. As an added feature, this fuel line kit also has another line to feed excess fuel back into the gas tank. Extra, unneeded fuel sometimes flows into the carburetor when the engine is cold and users are trying to prime the engine. Although durable and intended to last, this fuel line is subject to weathering over the course of several years, especially when subjected to temperature extremes. A broken or fractured fuel line will leak gasoline, resulting in an extremely dangerous situation. Leaking fuel lines must be replaced immediately. This component is easily located, situated between the fuel tank and the carburetor. It is easily disconnected and replaced. When choosing a new fuel line kit, make sure to choose a part like this one, which is a genuine OEM certified part. This fuel line kit is compatible with Jonsered and Husqvarna equipment.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

This handle assembly is a genuine Husqvarna part. It is an appropriate, exact replacement for a missing handle assembly or an original handle assembly that has been damaged. It is a genuine OEM sourced part sourced from the manufacturer. This part of the trimmer/edger is where the switch controlling the throttle is located. It provides the user with an exceptionally comfortable grip while using the trimmer/edger.To repair, remove the original handle and disconnect any electrical connection. Next remove the cutter shaft and throttle cable. Carefully attach the new handle, then reattach the throttle cable and wiring. Users will need a screwdriver, Torx driver, and pliers to replace this part on compatible models. This repair should take under one hour and is appropriate for people with moderate skill levels. The part does not include the throttle cable, which is sold individually.It is compatible with the Husqvarna 122C trimmer/edger, as well as the 122LD trimmer, 122LDx trimmer/edger, and 122LK trimmer, and other Husqvarna models.

Here is an authentic fuel cap assembly that is a replacement for the cap that comes on many gas-powered lawn and garden tools. The cap provides protection and security for the fuel tank opening, so no dirt or debris gets into the fuel. This fuel cap assembly features a retainer, which will keep the cap attached to the tank when refueling. The retainer ensures that the cap does not become lost or fall to the ground. Over time, there could be many issues with the current fuel cap on the machine. It might no longer provide a tight seal. It might no longer have a retainer, or it could have cracked due to age or an accident. Regardless, it is a good idea for owners to get a new fuel cap assembly to ensure the integrity of their fuel. No tools are needed for adding the new cap to the machine. This genuine OEM replacement fuel cap assembly is sold individually. The assembly will work as a replacement for more than 50 machines including edgers, string trimmers, brush cutters, and leaf blowers. It is compatible with models from Husqvarna and Craftsman.

The fuel filter is designed to clean the fuel before it enters the carburetor. This helps to catch dirt and debris that can get into the fuel line and build up over time, affecting the performance. When there is a clean fuel filter in place, the engine will run at peak performance. Over time, the filter will become dirty and clogged with debris and fuel residue, requiring replacement as a part of routine maintenance. This OEM replacement can get lawn and garden equipment back in shape in no time. Prior to the repair, make sure to disconnect the spark plug and drain the fuel. This genuine OEM fuel filter from Husqvarna is compatible with multiple models of engines. It can be used with chainsaws from Poulan, Jonsered, and Husqvarna, including more than 150 different models. This filter is sold as an individual unit.

This is a genuine replacement ignition module for select Husqvarna lawn and garden equipment engines. The ignition module, also known as the armature-magneto, creates high voltage power in pulses, which then passes on to the spark plugs and allows them to create the spark to fire the engine. This part consists of the ignition coil and the spark plug boot, which is made with durable rubber and insulated metal. When the various components fail, the engine may not get the spark that it needs to turn over because the spark plug is not getting the power. A replacement will get the equipment running again. This OEM replacement part is designed for use on gas-powered blowers and string trimmers, including select models from Husqvarna, Poulan, Weed Eater, and Jonsered. The ignition module comes as a complete part and includes the boot assembly and coil, so no additional purchases will be required. Hardware is not included, however, and will need to be bought separately when it is needed. This unit is sold individually. The engine should be cool before doing any repairs and gloves should always be worn to protect the hands during engine repairs and parts replacements.

This is a genuine replacement air box cover. It fits over the air box housing and helps to prevent dirt and debris from entering, while also preventing the air filter from becoming wet in the case of rain or falling out during use. The air filter is essential for ensuring clean air for combustion within the engine. The air box cover is made of durable plastic. However, over time, plastic components can become brittle with exposure to high heat and harsh sunlight, leading to cracks and damage. The air box cover can also be damaged if the machine is dropped or through contact with hard surfaces. Replacing the air box cover is a simple process. A plastic knob holds the cover to the base. Simply twist and remove the knob, and then remove the damaged air box cover. Replace it with the new cover and put the knob back in place. This replacement air box cover fits several Husqvarna edgers, brush cutters, and trimmers. Note that this is a genuine OEM part and is sold individually.

This is a starter pulley that is used with various types of string trimmers from major manufacturers.The pulley keeps the starter rope in the right location so that the chainsaw comes on and offers cutting power. Through wear and tear or impact, the starter pulley can break or become damaged.If a user pulls the starter rope and the engine does not start, the starter pulley may not be working correctly. It will need to be replaced. Before the replacement is made, make sure the tool is turned off and the spark plug wire is disconnected. The starter pulley and rope can be reached by disassembling the trimmer. The recoil spring should be rewound before the rope is threaded back in.This starter pulley is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is made for use with string trimmers manufactured by Turf King, Craftsman, Paramount, Weed Eater, Poulan, and Poulan Pro.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This hairpin clip is a metal fastener, also known as a spring cotter or retaining pin. This is standard hardware that features a straight edge and an indentation to ensure secure attachment to desired parts or equipment. This reusable formed wire is easy to install and uninstall and has multiple applications. This part is commonly used in conjunction with clevis pins. This replacement hairpin clip comes in a polished finish. Use this genuine OEM replacement part on lawnmowers and tillers from Husqvarna, Craftsman, Murray, Weed Eater, Ryobi, Poulan and Poulan Pro. This item is priced and sold individually.