Husqvarna String Trimmer Parts

Push nut fastener for riding mowers and lawn tractors. Secures panels, guards, and trim components. Replace if cracked, missing, or no longer gripping.

Upstop bracket for walk-behind mowers. Mounts to the deck to support and position the handle assembly. Replace if bent, cracked, or damaged from impact.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

A new rope kit may be necessary if the original rope becomes deteriorated or frays with regular equipment use.This rope is part of the recoil starter assembly, an essential component that enables the motor to be pull-started. Due to frequent usage and wear and tear, the rope can easily fray. Without this rope the engine cannot be manually pull-started. It is manufactured from durable nylon.This Husqvarna rope kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement Husqvarna rope kit fits various different models of Husqvarna, Poulan, and Craftsman blowers, trimmers, and hedge trimmers. Please note this is sold individually. Handle grip not included.

Hex head screw for lawn tractors, riding mowers, and snowblowers. Replaces lost, stripped, or corroded fasteners in various assembly locations.

Ignition module for chainsaw engines. Installs on the engine block to control spark timing. Replace if cracked, damaged, or corroded terminals affect ignition.

Fix trimmer that won't accelerate, makes grinding noises, or emits burning smell. Clutch assembly connects engine to cutting head. Moderate DIY repair.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

Fix a riding mower that won't start or has no electrical power with this protective fuse. Simple 5-minute replacement prevents electrical damage.

This is a bellcrank ground drive intended for use with riding mowers, tractors, and trimmers. The bellcrank ground drive employs the idler pulleys when the pedal brake control shaft assembly is pressed. A new bellcrank may be needed if the original was faulty, or if it becomes significantly worn through general operation of the machinery. However, installation of a new bellcrank is relatively simple. Only a few tools will be required when replacing this item, including: a socket set, a set of pliers and a hex wrench. The removal of the mower deck will also be required. The user should refer to their owner's manual for guidance regarding their specific model.This is an OEM part sourced directly from the manufacturer. It is sold individually. The bellcrank ground drive is designed for use in Husqvarna, Poulan, Weed Eater, and Jonsered models.

Throttle and choke control cable for front-engine lawn tractors. Replacement needed when cable is frayed, broken, or binding. Restores smooth operation.

Replacement fuel tank for grass line trimmers. Stores fuel that powers the engine. Replace if cracked, leaking, or damaged to restore fuel containment.

This is a trimmer deflector that is used in line trimmers. This trimmer deflector attaches to the bottom chassis and is designed to protect the operator of the trimmer from the spinning cutting line and any debris which flies up during the trimming process.A new trimmer deflector will be needed if the original is cracked, broken, or damaged in any way. If it is missing, it is important to replace it immediately for safety reasons. If the trimmer deflector is not functioning properly, the operator will notice that they are being hit by flying debris from the trimmer. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This trimmer deflector is a genuine Husqvarna part. It is sold individually. This particular trimmer deflector is compatible with line trimmers that are manufactured by Husqvarna and Jonsered.