Parts for Ge PSB48YSKCSS: Ice Maker & Dispenser Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This screw fastens appliance panels, brackets, and trim so parts stay secure and aligned. Replace a missing, stripped, or rusty screw to stop rattles and restore a tight, factory fit.

• Secures covers, brackets, and trim to the appliance cabinet or liner
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration noise and loose or misaligned parts
• Maintains proper fit of guards, kickplates, or internal panels

• Disconnect power; turn off water supply if working near water lines
• Match to the original fastener to size and thread
• Start threads by hand to avoid cross-threading; tighten snugly, not excessively
• If threading into plastic, avoid overtightening to prevent damage

This fill cup directs water into the ice maker so each cycle produces properly filled ice trays. It helps prevent overflows and ensures reliable water delivery to the ice maker assembly. What it does:

• Guides the water fill into the ice maker mold during harvest and fill cycles
• Helps prevent water from spilling into the freezer compartment
• Supports consistent ice size by ensuring proper water placement
• Common replacement when cracked, warped, or leaking and causing underfilled or overflowing ice

• One fill cup for the ice maker

• Disconnect power to the appliance before service to avoid electrical shock
• Remove ice maker/module per manufacturer instructions before replacing the cup
• Inspect the surrounding chute and seals for damage or ice buildup when installing
• Use only manufacturer-recommended fasteners and reassemble components in reverse order

The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.

Symptoms of a faulty electromechanical kit include: 

• Ice not being produced or dispensing properly
• The ice maker failing to turn on or stop automatically
• Strange noises emanating from the ice maker

Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.

This replacement auger motor drives the dispenser auger to move ice from the freezer bin to the dispenser chute, restoring reliable ice delivery. Fits dispenser assemblies that use the WR60X10276 auger motor. What it does:

• Turns the auger shaft to push ice through the dispenser chute for user-activated dispensing
• Replaces a motor that hums, fails to turn, or stops feeding ice
• Helps stop intermittent or no-ice-dispense symptoms when the auger motor is the faulty component
• Works as the mechanical drive for auger-style ice dispensers in compatible refrigerators

• One auger motor (WR60X10276)

• Disconnect power to the appliance before starting any repair
• Remove the freezer door liner or dispenser housing to access the motor and auger assembly
• Note wiring locations and mounting orientation during removal; reconnect wiring and secure mounting when installing
• Test dispenser operation with power restored and handle ice bin components carefully to avoid damage

This ice bin front is the replacement front panel that restores the ice storage compartment door and helps keep ice contained and accessible. Fits refrigerators that use a separate ice bucket front panel. What it does

• Replaces a cracked, chipped, or broken ice bin front to prevent ice spillage
• Restores the bin door/face for easy access to the ice bucket
• Helps maintain a proper seal between the ice compartment and refrigerator interior
• Useful when the original front panel is scratched, warped, or missing

• One ice bin front panel

• High-level replacement — remove the ice bin or access panel and swap the front panel; your model's service guide
• Power off or disconnect refrigerator per manufacturer instructions before working near electrical components
• Handle the plastic parts carefully to avoid cracking; use appropriate trim clips or screws if provided by your model

This door ice bin is the removable plastic container that stores ice made by your refrigerator's icemaker. It keeps ice contained in the door for easy access and helps prevent spills inside the fresh-food compartment. What it does

• Holds and stores cubed ice produced by the icemaker so it's ready at the door
• Keeps ice from spilling into the refrigerator cavity when the door is opened
• Replaces cracked, damaged, or missing ice storage bins that cause leaks or loose ice
• Restores proper alignment with the door shelf for smooth removal and replacement

• Empty any loose ice before removing the old bin to avoid spills
• Typically installs by sliding into the door shelf track; lift slightly to remove
• Inspect door shelf guides for damage and align bin carefully when reinstalling
• Wear gloves when handling cold ice and avoid forcing the bin to prevent cracking

This replacement ice bin door track guides the dispenser door or ice bin slide so the ice chute opens and closes smoothly, helping restore proper ice dispensing and reduce jams or binding. What it does:

• Provides the sliding/tongue surface for the ice bin door to move smoothly.
• Restores proper alignment when the dispenser door sticks or drags.
• Helps stop the ice bin door from binding or catching during operation.
• Useful when worn, cracked, or damaged track edges cause noisy or uneven motion.

• Disconnect power to the refrigerator before beginning any repair.
• Inspect surrounding trim and fasteners; replace any stripped screws to ensure secure fit.
• Installation typically requires basic hand tools; handle plastic parts carefully to avoid cracking.

The Ice Bucket is an OEM replacement part for GE refrigerators. It stores and dispenses ice from the freezer compartment. Causes of a bad ice bucket can include wear and tear over time or damage to the bucket or its parts due to mishandling or impact. 

Symptoms of a faulty ice bucket include:

• Ice not dispensing properly or getting stuck
• Leaks or drips from the ice dispenser
• Difficulty removing ice from the bucket

If you notice cracks, breaks, or any damage to the ice bucket, it may be time for a replacement. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

A 6 x 1/2 inch pan-head Phillips screw used to fasten panels, trim, brackets and small assemblies on appliances. Replacing worn or missing screws restores secure mounting and reduces vibration or rattling. What it does:

• Fastens panels, brackets and trim where a 6 x 1/2 in. pan-head Phillips screw is required.
• Stops loose or rattling parts caused by missing, stripped or corroded screws.
• Provides the correct head profile for a Phillips driver to allow proper torque and seating.
• Used in non-structural fastening points on appliances.

• Always disconnect power and unplug the appliance before beginning repairs.
• Use the correct-size Phillips screwdriver to avoid cam-out and head damage.
• Do not over-tighten; over-torquing can strip threads or deform mating parts.
• Inspect mating threads and replace damaged components before installation.