Parts for Electrolux EW23BC71IS4: 17 - Ice Maker Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Refrigerator ice maker mounting frame that secures the ice maker assembly to the freezer compartment wall. Replace if cracked, broken, or missing.

Mounting bracket for bottom-mount refrigerators. Secures internal components. Replace if cracked, broken, or missing to restore proper fitment.

Mounting bracket for bottom-mount refrigerators. Secures internal components in place. Replace if cracked, bent, or broken to restore proper support.

Replacement shaft for bottom-mount refrigerators. Installs in mechanical assembly. Needed when original shaft is bent, broken, or worn down.

Fix refrigerator frost buildup, freezer not cooling properly, or excessive ice formation. This defrost thermostat regulates defrost cycles to prevent issues.

Secures refrigerator hoses and tubing to prevent leaks. Replace if loose, cracked, or during water line repairs. Verify fit with your model number.

Wiring harness for bottom-mount refrigerators. Connects electrical components inside the appliance. Replace if wires are frayed, damaged, or broken.

Fix frost buildup in your refrigerator's freezer section with this defrost heater. Prevents ice accumulation on evaporator coils for proper cooling.

Replaces a cracked or damaged ice maker tray assembly in your refrigerator. This tray molds and releases ice cubes within the ice maker housing.

Fix warm spots or no cooling in your refrigerator. This evaporator fan motor circulates cold air through compartments to maintain even temperatures.

Ice maker won't stop making ice or overflows? This shut-off arm controls ice production by signaling when the bin is full. Simple DIY fix for most models.

Secures trim panels and small components inside your refrigerator. Replace this mounting screw if stripped, missing, or worn to restore proper fit.

Mounting screw for bottom-mount refrigerators. Secures interior components, shelves, or panels. Replace if stripped, missing, or damaged during repair.

This thermistor kit is the refrigerator temperature sensor assembly that monitors internal air temperature so the control can run the compressor and fans at the right times. Replaces a failed sensor to restore proper temperature sensing and cycling. What it does:

• Detects refrigerator/freezer compartment temperature and sends that signal to the control board
• Helps the control manage compressor and fan runtime for consistent cooling
• Commonly used when the fridge is not maintaining temperature or cycles erratically
• Works as the sensor portion of the evaporator/air-sensing circuit in compatible models

• Disconnect power before servicing to avoid shock or damage.
• Handle the sensor and connector gently; do not kink the sensor lead or damage the probe tip.
• Route the harness and secure clips per the original layout to ensure accurate sensing.

Fix a refrigerator not cooling or freezing issues with a new evaporator coil. This part absorbs heat to keep your fridge cold. Moderate difficulty repair.

Fixes ice buildup in freezer or frost on back wall. This defrost heater melts accumulated frost during defrost cycles. Moderate DIY difficulty.

Secures panels, brackets, and trim on appliances. Replace when missing, stripped, or damaged to restore a tight, rattle-free fit and proper alignment.

Replacement screw for refrigerator assembly. Used to secure panels, shelves, or internal components. Needed when original is stripped, lost, or damaged.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Ice maker stopped working or water dispenser not flowing? This refrigerator water valve controls water to both. Easy 10-20 minute DIY fix with video.

Secures internal refrigerator components and assemblies. Replace if bracket is cracked, broken, or missing to restore stable mounting and alignment.

Secures tubes and wiring in your refrigerator. Replace if clips are broken or connections are loose. Confirm fit with your model number.

Electrical harness wire for refrigerators. Replaces damaged, frayed, or disconnected internal wiring. Essential when harness is broken or melted.

Fill tube assembly that connects water supply to the ice maker in your refrigerator. Replace if tube is cracked, leaking, or grommet is worn or missing.

Replacement mounting screw for refrigerator panels, brackets, and trim. Secures loose or missing fasteners to stop rattles and keep components aligned.

Water inlet tube for refrigerators. Connects the water supply to the dispenser or ice maker. Replace if cracked, kinked, leaking, or damaged.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Connects sections of water tubing inside your refrigerator. Replace this adapter if cracked, leaking, or popping off to stop drips and water damage.