Parts for Craftsman 358360381: Ignition / Muffler Parts

The module ignition coil creates an electric charge when the magnets on the side of the flywheel pass the ignition module. It is an important part of the combustion process that takes place in the chainsaw and ensures that the motor has the power it needs to function properly. If it is difficult to start the chainsaw, if it misfires, or if it stalls during use, the problem could stem from a faulty ignition coil. The coil might have suffered damage, or it might be loose. This prevents it from keeping the engine functioning and running. If the chainsaw does not restart once it is hot, this could also indicate a problem with the ignition coil. The ignition coil attaches to the motor assembly near the flywheel. The OEM replacement part comes from the manufacturer and will work with a range of models of chainsaws. Brands that can use this part include Craftsman, Poulan, Poulan Pro, and Husqvarna.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This wire harness assembly is an authentic replacement for chainsaws. It is supplied from the manufacturer. The wire harness assembly connects to the ignition module. It is made of two wires. One of the wires carries the power from the coil to the switch, while the other wire attaches to the engine ground on one side and has a switch contact on the other side. The wires have a rubber insulated coating that helps to protect them from high heat. These wires can suffer damage in many ways. They could become frayed or cut, they could have been subject to extremely high temperatures, and more. When they are damaged, it can cause a continuity loss in the circuit which can shut off the saw. Owners should look for broken or frayed wires. They can also use a multimeter to check the wires for continuity. If there are issues, the wires should be replaced right away. The chainsaw wire harness assembly is a genuine OEM replacement part for use with chainsaws. The assembly is sold individually. It will work with select chainsaws from Craftsman, Husqvarna, Poulan, and Poulan Pro.

This air filter cover is a genuine Husqvarna part, sold individually. This air filter cover can be used as a replacement part for chainsaws. The purpose of an air filter cover is to prevent damage to the air filter; the air filter blocks the motor from taking in harmful external materials such as dirt, debris, and pebbles. Air filter covers are often replaced within the lifespan of a chainsaw as they can be subject to general wear and tear over time. If there are visible punctures, rips, or signs of erosion to the material, the air filter cover should be removed immediately and replaced with this genuine OEM replacement part. A broken air filter cover could cause further damage to the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air filter cover is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

The air filter works to prevent contaminants from entering the chainsaw’s carburetor. When the air filter becomes clogged with things like dust, yard clippings, pollen, and other materials, it cannot supply fresh air to the carburetor. If the carburetor does not have enough air to mix with the gasoline, it cannot create a fuel mixture for the engine. If you see signs that the engine is not running correctly, runs roughly, or does not start at all, check the air filter and replace if needed. It is important to check the air filter frequently to prevent damage or engine inefficiency. Keep several air filters on hand to make swapping them out convenient. A good rule of thumb is to replace air filters annually. This air filter is compatible with chainsaws made by Craftsman, McCulloch, and Poulan. This air filter is a genuine OEM part.

This screw is a genuine MTD part, sold individually. A screw can be used as a replacement part in a chainsaw. The purpose of this genuine OEM part is to pierce and rotate into one or more components such that the stability and placement of those components can be secured within the external or internal machinery of the chainsaw.The screw in a chainsaw might be lost or damaged within the typical lifespan of the appliance. If the screw is lost or damaged, it should be immediately replaced by this genuine OEM replacement part; the same replacement should occur if the screw has suffered enough damage to reduce or negate its typical functionality. Refer to the manual for detailed instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

The chainsaw carburetor mixes air and gas before this mixture makes its way to the engine. If this is not working correctly, the engine receives a less efficient gas supply or no gas supply at all. If your chainsaw has a full tank of gas but will not start or stops just after starting, the carburetor may need to be replaced. While carburetors can be cleaned to get them working again, they often need to be replaced if they have become too clogged. Depending on what you can reuse from your old carburetor, you may need to order new gaskets as well to ensure an airtight seal. A screwdriver, a nut driver, and a socket wrench set may be needed to complete this repair. This chainsaw carburetor is sold individually from other parts, but it does include the primer bulb. It is compatible with Craftsman and Poulan chainsaws. This chainsaw carburetor is a genuine OEM part.

This is a complete set of gaskets designed as a set to make the most of chainsaw maintenance and repair. This OEM gasket kit contains seven unique gaskets that should be replaced whenever a chainsaw's motor is serviced or repaired. Gaskets are designed to ensure that fuel remains where it is intended within the engine and parts and does not leak or seep into other areas. The pressure is maintained in the machine through the use of effective gaskets and seals. This is a complete kit and comes with every gasket needed for chainsaws made by Craftsman, Husqvarna, Poulan, and McCulloch, among others. It does not come with any associated parts necessary for full chainsaw maintenance and will require disassembly of several systems to install the new gaskets.

This product is the chainsaw's engine cylinder, which holds fuel ignited by the spark plug. It fits into the existing chamber and houses the pistons during use. It is attached to the carburetor for fuel injection. The spark plug is set within it to ignite the fuel. This part has to be screwed securely into place prior to use and requires lubrication for the engine to run smoothly. If the engine suffers from poor fuel ignition, or leaking fuel, the cylinder may be cracked. When installing the new part, a few holes may require a tap to fit each specific machine. Pistons and bolts sold separately. Existing parts should be cleaned prior to use. This OEM replacement part is sourced straight from the manufacturer and works with certain models of Poulan and Husqvarna small engines.

This muffler kit can be used as a replacement part in chainsaws. It provides all the necessary pieces for muffler installation. On chainsaws, the muffler's purpose is twofold: it quiets noise, and it redirects the chainsaw's exhaust away from the user. The clearest sign that a muffler needs to be repaired or replaced is a change in noise level. Strange odors are another symptom of a damaged muffler, in which case the muffler should be removed and replaced immediately. A final symptom of damage in a muffler is reduced fuel economy, which can be attributed to a number of other factors but can point to muffler damage if paired with a change in noise or a strange odor. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This muffler kit is a genuine Husqvarna part, sold individually. It is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This is a genuine replacement spark arrestor kit that is used with certain styles and models of chainsaws. The spark arrestor kit will attach to the cylinder gasket and is designed to catch any particles that are coming from the engine that are hot or likely to create a fire risk. This ensures that the internal combustion engine can operate effectively. When the spark arrestor is damaged or worn, or if pieces go missing, it will not be able to give the engine the protection from flammable debris that it needs. A replacement is necessary for the safe operation of the chainsaw. This OEM authentic spark arrestor kit is manufactured by Poulan and compatible with over 50 of the chainsaws that are made by the brand. This kit includes the screen, the metal arrestor, and the nut that connects the components and helps secure the entire assembly to the engine's cylinder gasket. This part replacement will require a nut driver and a set of pliers. Allow the engine to cool completely and always disconnect the spark plug when performing engine repairs or internal replacements. Owners will want to wear gloves for hand protection, as well.

This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.

This replacement part is an insert transfer and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Insert transfers are small but very important to many different appliances like chainsaws. These parts reduce friction inside of the motor and piston. Without this part the engine could become damaged.A new insert transfer might be needed if the user hears noises coming from the equipment that are not normal. If there is excess heat coming from inside the appliance this might also be the cause. It is common that insert transfers become stripped overtime due to normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

This piston is an important part of the internal function of a chainsaw. The piston moves in and out of the cylinder while pushing the connecting rod that turns the crankshaft. Without a functioning piston, the chainsaw will not work. The piston could fail due to natural wear and tear, or it could become damaged because of other issues with the chainsaw. Corrosion could also be a problem. Regardless of what causes the pistons to have problems or to break, owners need to replace them as soon as they see a problem. This is a genuine OEM replacement piston kit. The kit includes a piston, piston pin, piston ring, and two piston pin retainers. The piston kit is only for use with chainsaws. It is compatible with several brands including Husqvarna, Poulan, Poulan Pro, and Craftsman.

This replacement part is a transmission insert and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This transmission insert is used in chainsaws and allows the transmission to operate smoothly. A new transmission insert might be needed if the current one is damaged or missing. If there are noises coming from the inside or the appliance won't stop or start properly, it might be due to a bad transmission insert. Be sure the engine is completely turned off before attempting to start this repair. Because this part is close to other areas that can be dangerous, it is recommended that the user wear work gloves during the job to prevent injury. This transmission insert is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit. This part is sold individually.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or stripped screw in outdoor power equipment. Screws are a standard piece of equipment hardware with different uses. They help to secure parts of the equipment together properly. If a screw becomes corroded, stripped, misplaced, or is otherwise defective, then it should be replaced. Wear work gloves and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This part is specifically designed for use with chainsaws. This tube intake is designed to create a flexible path between the adapter and carburetor, ensuring efficient equipment functionality. If the tube intake becomes worn, detached, or cracked, the carburetor may not be able to properly mix the correct ratio of air and fuel, causing the engine to misfire or underperform. This tube intake is a genuine OEM replacement part that has been sourced directly from the manufacturer. This tube intake is designed to fit various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.