Parts for Echo PE-200: Intake / Exhaust Pe-201 Parts

The wing nut seen here is used for the air filter covers on many different types of handheld outdoor power equipment. Other names for the wing nut include wing bolt and wing stud. This nut has “wings” at the top, which allows the users to turn them by han

Protects air filter from debris that could cause clogging or damage. Replace if cracked, broken, or lost to maintain proper airflow. Verify fit with model.

This is a genuine OEM replacement choke label sourced directly from the manufacturer. This label is used on many different pieces of outdoor lawn and garden equipment that are outfitted with a choke. The label indicates to the operator the direction to move the choke for a cold start and then the direction to move the choke when it is running or for idle. This is a generic label that does not identify the equipment brand. This makes it usable for any piece of equipment with a choke.Over time, this label can become worn and unreadable. Replacing the label keeps the machine looking newer and also provides instructions for anyone using the equipment for the first time. The choke controls the amount of air going into the carburetor. The label is a self-stick piece that does not require tools to install. Pull the old label off. Clean the area to remove any residual glue. Peel the backing off the sticker and apply to the equipment. This label is sold as an individual unit. It is compatible with blowers, cultivators, edgers, pruners, pumps, reciprocating saws, and other engines with a choke manufactured by Echo, Little Wonder, Shindaiwa, and other companies.

This part is the replacement air filter for the small engine that powers several outdoor tools and equipment. It comes with a black plastic rim measuring 2.5 x 2.5 inches. It prevents dirt and debris from entering the carburetor and engine where they can

This is a genuine replacement bracket that is designed to fit select lawn and garden equipment engines. The bracket is responsible for helping to secure the air filter inside of the filter cover assembly. This metal bracket screws into place, and is often

The intake gasket is designed to act as a seal between the cylinder head and the heat dam. It keeps the engine sealed and protected during use. Not only does this reduce the risk of damage to the engine on various lawn equipment units, but it eliminates p

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

The insulator acts as a protective cover that secures onto the carburetor to keep it safe from the heat coming off of the engine block. The insulator is made of a durable compound material to offer the best protection possible. Through use, the insulator can crack or become damaged. This will let air get into the engine, creating lean conditions that can cause engine problems as time goes on. If this happens, the insulator will need to be replaced. This can be done by removing the air filter, draining the fuel, and removing the intake assembly. Remove the insulator from the engine before installing the new replacement insulator. Thread the mounting screws through the air cleaner case and bracket, so it fits flush against the case. Reinstall the other components before use. This is a genuine OEM insulator for Echo, Mantis, and Little Wonder trimmers, water pumps, hedge trimmers, tillers, pole saws, and edgers. It is sold as an individual component, and a screwdriver will be needed to make the replacement.

The manufacturers of Echo, Shindaiwa, and Little Wonder tools use this #5 nut at various points in more than 150 gasoline powered tools. Included among them are hedge trimmers, power saws, pruners, grass trimmers, edgers, leaf blowers, and chainsaws. The

This 5 x 55 hex bolt is designed for many types of lawn and garden equipment. It is generally used to secure the muffler in place. Each bolt is made of durable metal. If the bolt snaps or becomes damaged or corroded, it will need to be replaced. Keeping a defective hex bolt installed can cause the muffler to eventually come loose.A visual inspection of the hex bolt will indicate whether it is working correctly. If it needs to be replaced, a screwdriver will be required. Place the lawn and garden equipment on a flat surface and remove the spark plug wire for safety. The bolts and any other damaged parts can be removed. Use an Allen wrench to add in the new hex bolt.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The 5 x 55 hex bolt is designed to be used with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Shindaiwa, Echo, and Mantis.

A spark arrestor screen, also known as a muffler screen, is a component that prevents flammable debris from reaching the engine. Through regular use, the screen can become worn and require replacement. When the screen becomes clogged, it is possible to tr