Jenn-Air Wall Oven Parts

Replacement cold control that restores temperature regulation in compatible refrigerators. Installs behind the temperature knob to control compressor cycling, helping stabilize interior temperature and stop constant running or temperature swings. What it does:

• Regulates refrigerator temperature by switching compressor/fan operation on and off.
• Replaces a failed temperature control that causes inconsistent cooling or interior temps that are too warm or too cold.
• Can stop issues like the compressor running continuously or frequent temperature fluctuations.
• Works with compatible refrigerator control housings and knobs.

• Disconnect power before replacing the control to avoid shock or injury.
• Note wire locations and knob orientation before removing; reconnect wires to the same terminals.
• Handle the control carefully and avoid bending or stressing mounting tabs and contacts.
• After installation, restore power and verify proper cycling and temperature stabilization.

Replacement infinite switch that restores variable heat control for a surface heating element on an electric range, letting you adjust burner temperature smoothly and accurately. What it does:

• Regulates power to a surface heating element so the burner produces the selected heat level.
• Replaces a failed or worn rotary control that no longer changes element output.
• Common symptoms: burner won't heat, only heats at one setting, temperature jumps or fluctuates, or knob turns with no effect.
• Fits behind the console and connects to existing element wiring and control knob.

• Disconnect the appliance power before removing the console or control panel to avoid electrical shock.
• Confirm wire locations and take a photo before disconnecting to ensure correct reconnection.
• Secure the switch in place and reconnect wires firmly; test all settings after reassembly.

This broiler pan is the heat-safe tray used for broiling in the oven or broiler drawer. Replace a rusted, warped, or missing pan to maintain safe broiling and simpler cleanup by catching drippings.

• Holds food for broiling and supports correct placement under the broiler
• Collects drippings to help reduce flare-ups and smoke
• Restores safe use when the original pan is rusted, pitted, dented, or warped
• Seats on the designated rails/supports in the broiler drawer or compartment per model design

• Allow the appliance to cool completely; wear cut-resistant gloves
• Remove the broiler drawer or open the broiler compartment as your model requires
• Position the pan on the proper rails/supports and verify stable seating before use
• Follow your model's user guide for broiling setup and care

The Infinite Switch Knob is an OEM replacement part for Whirlpool cooktops. Measuring an inch and a half in diameter this knob has an orange indicator line and corresponding orange lettering marking the "off" position. White numbering indicates various temperature levels, for clear and precise adjustments to the surface burner settings.

Over time, wear and tear from frequent use, excessive force when turning, or accidental damage can cause the knob to crack, loosen, or lose its grip. These issues may result in poor control over the surface burner's heat settings, leading to inefficient cooking.

Symptoms of a faulty Infinite Switch Knob include:

• Difficulty adjusting the temperature settings
• Knob slipping, turning loosely, or misaligned
• Cracks, broken, or missing components

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement cooktop surface panel forms the appliance's upper cooking surface. It restores a smooth, level top, protects internal components from spills, and ensures correct alignment of the surface components for safe, reliable everyday use.

• Forms the cooking surface and covers the chassis beneath
• Provides openings/mounting points for surface components
• Common failure signs: cracks, chips, dents, rust, or finish damage that won't clean
• Warping or broken mounting points causing components not to sit flat or secure

• Disconnect power; for gas models also shut off the gas supply
• Wear cut-resistant gloves; handle carefully to avoid bending, chipping, or scratching
• Transfer surface components (e.g., burners/elements, bezels, gaskets, screws) from the old panel as directed by your model's service information
• After reassembly, restore power and, for gas units, check connections for leaks before use

This cooktop is the appliance's main top surface. It restores a safe, level, easy-to-clean work area when the original top is damaged, helping your range or cooktop look and function as intended.

• Provides the upper surface that supports and aligns burners or heating elements
• Helps contain spills and protects internal components from moisture and debris
• Restores proper fit, finish, and stability when the original top is cracked or warped
• Typical replacement symptoms: visible cracks, chips, stains that won't clean, or broken mounting points

• Disconnect power at the breaker; shut off gas supply before servicing
• Handle carefully; edges and surfaces can be fragile—use gloves and a protective surface
• Transfer any components from the original top to the new part, noting positions and wire routing as applicable
• Test operation before returning to service

The Blower Motor is an OEM part for Whirlpool ranges. It is an electronic component located underneath the range that is responsible for removing heat, smoke, and odors from the kitchen. The down draft blower motor operates an exhaust system that draws air through a vent behind the cooking surface and vents it outside.

Causes of a bad down draft blower motor can include normal wear and tear over time, exposure to grease or debris which can cause clogs or mechanical issues.

Symptoms of a faulty down draft blower motor include:

• Inadequate ventilation of heat, smoke or odors from cooking
• Slow or delayed venting of the cooking area
• Loud buzzing or grinding noises coming from underneath the range
• Failure of the venting system to turn on

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This surface burner spark electrode creates the spark that lights the gas on your range or cooktop. Replacing a worn or cracked electrode restores reliable ignition so burners light quickly and consistently when you turn the knob.

• Produces a high-voltage spark at the burner to ignite the gas flame
• Helps resolve: burner won't light, no or weak spark at that burner, needs manual lighting, intermittent ignition
• Damage or contamination on the ceramic insulator can prevent proper arcing
• Direct replacement for the failed electrode at the affected burner

• Disconnect power and shut off gas supply before servicing
• Allow unit to cool completely
• Remove burner cap and head to access the electrode; transfer mounting hardware if reused
• Handle the ceramic insulator carefully; reconnect lead securely and align the tip near the burner head as originally positioned

This burner valve knob replaces a worn or missing surface burner control so you can turn the gas on/off and set flame levels precisely. It restores smooth, secure control of your cooktop's surface burners.

• Mounts to the surface burner valve stem to control gas flow and flame height
• Restores accurate turning and feel when the original knob is cracked, stripped, or loose
• Common symptoms: knob falls off, won't engage the stem, hard to adjust flame, missing knob
• Helps ensure the burner reliably turns fully Off and adjusts smoothly through settings

• Turn all controls OFF and allow the cooktop to cool before servicing
• Unplug or disconnect power to the range for safety
• Pull the old knob straight off; align the new knob with the valve stem (match the flat/D-shaped side) and push straight on—do not force
• Confirm smooth operation and proper Off alignment after installation

This replacement control knob fits the surface element infinite switch, allowing you to turn the burner on and set the heat level. Replace a cracked or missing knob to restore safe, accurate burner control.

• Attaches to the surface burner's infinite switch to select OFF through heat settings
• Restores positive grip when the original knob is cracked, stripped, or missing
• Typical symptoms: knob spins freely, won't stay on, is hard to turn, or has broken pointer
• Helps ensure clear setting indication and consistent adjustment

• Disconnect power to the range/cooktop before servicing
• Pull the old knob straight off the switch shaft—no tools required
• Align the new knob with the switch shaft and press firmly until fully seated
• The pointer aligns correctly with OFF and heat settings

This door handle spacer fits between the handle and the door panel, providing the correct standoff and a clean, finished look. Replacing a worn spacer helps keep the handle secure and aligned.

• Maintains proper spacing between the handle and door surface
• Helps stabilize a loose or wobbly handle
• Replaces cracked, discolored, or missing spacers
• Color: Bisque (cream/tan finish) to match compatible appliances

• Disconnect power and allow the appliance to cool before servicing
• Support the door and handle while removing mounting screws
• Transfer or replace spacers on both sides of the handle if needed; do not overtighten screws
• Wear gloves to protect hands and avoid stressing glass panels

Color: White. Measures about a little over 2 inches in diameter. For black order WP74011287.

This replacement surface burner knob restores reliable control of your cooktop or range. It attaches to the control shaft so you can turn the surface element/burner on and accurately adjust the heat level. What it does:

• Mounts on the surface control valve/switch shaft to select OFF and adjust heat settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps resolve issues like a knob spinning freely, wobbling, or not staying on the stem
• Restores confident, consistent control over the surface burner/element

• 1 surface burner knob

• Disconnect power and allow all burners to cool; if applicable, shut off gas
• Pull the old knob straight off the control shaft—do not pry against the panel
• Align the new knob with the shaft and press straight on until fully seated
• Verify smooth operation and OFF alignment; reseat if needed

This control panel console assembly houses the user interface and display for the range, restoring reliable button/touch input and clear visual feedback so you can set cooktop and oven functions with confidence. What it does

• Provides the keypad/touch controls and display used to set temperatures, timers, and cooking modes.
• Replaces a cracked, faded, or damaged console that impairs operation or visibility.
• Use when buttons or touch controls are unresponsive, the display is blank or dim, or inputs register intermittently.
• Helps correct erratic or inconsistent control behavior caused by a damaged panel assembly.

• Disconnect power (unplug or turn off the breaker) before beginning any service.
• Follow model-specific disassembly steps to remove the backguard/console; handle glass and overlays carefully to avoid damage.
• Ensure all wire harness connectors are fully seated and routed without pinching; do not force connectors.

This stainless steel control panel assembly is the user interface for your appliance. Replacing a worn panel restores a clean look and reliable button operation when the original is cracked, dented, or the keys stop responding.

• Provides the buttons and labels used to select settings and cycles
• Sends keypad selections to the appliance's control
• Secures the user-interface components at the front of the unit
• Typical symptoms: unresponsive or intermittent buttons, stuck keys, cracked/dented console, worn or illegible labels, loose panel

• Disconnect power at the breaker before servicing
• Support the panel as you remove screws to avoid straining wiring
• Carefully release and reconnect any ribbon/plug connectors; keep contacts clean and unbent
• Reuse mounting hardware and transfer any trim or brackets from the original panel; test all buttons after reassembly

The Microwave Thermostat is a reliable component designed to regulate temperature in your microwave, ensuring optimal performance and safety. This genuine OEM part is specifically compatible with a wide range of Samsung microwave models, providing a secure and precise fit. By maintaining the correct temperature levels, the Microwave Thermostat helps prevent overheating and extends the lifespan of your appliance. Installing the THERM thermostat restores your microwaveGÇÖs functionality, allowing you to enjoy consistent heating results every time. Crafted from high-quality materials, this thermostat offers durability and dependable operation, giving you peace of mind with your repair. Whether your original thermostat is malfunctioning or needs replacement, the Microwave Thermostat is the perfect solution to maintain your microwaveGÇÖs efficiency and reliability. Trust in this genuine OEM part to keep your Samsung microwave running smoothly and effectively.