Kelvinator Dishwasher Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 154637401
The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.
Symptoms of a faulty Water Inlet Valve include:
- No water or insufficient water entering the washing machine tub
- Washing machine not filling or taking an excessive amount of time to fill
- Leaks or water dripping from the inlet valve area
- Unusual noises or vibrations during the fill cycle
Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.
This part fixes the following symptoms
-
Will not fill with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Hot water inlet solenoid valve lealing Virgil H. • Whitehall , NY • December 04, 2015
Obtained part online from Appliance Parts Pros. com... within one or two days received the part...
Replacing the defective part is straight forward... The valve is located on the left underside of the unit. Make sure the electrical power is off and the water supply to the unit is closed off. Disconnect the water inlet piping from the valve... in my case separating a 1/2 inch copper union. Remove the electrical quick connector from the solenoid prongs. The red wire is orientated at the top of...
Read more
More
$25.70
- Compare At:
-
$36.53
- You Save:
-
$10.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 807048001
This flapper valve is the dishwasher's one-way drain check. It directs wastewater out and helps prevent backflow into the tub, promoting complete draining and reducing standing water, odors, and water returning after the drain cycle.
- Maintains one-way water flow from the sump/pump to the drain hose
- Helps prevent backflow from the sink or air gap into the dishwasher tub
- Wear, warping, or sticking can lead to slow draining or water left in the tub
- May also present as water backing into the tub after a cycle or intermittent drain faults
What's included: 1 flapper valve Install notes:
- Disconnect power and turn off water supply before servicing
- Access the valve at the drain outlet/pump area; note hose and clamp orientation
- Match the original valve orientation; the flapper should open toward the drain hose (direction of flow)
- After reassembly, run a short fill-and-drain test and inspect for leaks and proper draining
Do-It-Yourself Stories from Customers like You
Dishwasher was not draining Bryce K. • Ames , IA • March 16, 2015
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Frigidaire part
By: Frigidaire
Part Number: 154246402
This small check ball helps control water flow inside the refrigerator's water/ice system to prevent backflow and ensure proper filling. It restores reliable water seating where valves or distributor ports use a ball-style check. What it does:
- Acts as a one-way seal to stop water from flowing backward into the supply line or valve bore
- Helps the ice maker and dispenser fill correctly by allowing water in but not back out
- Common symptom: intermittent or incomplete ice maker fills
- Common symptom: slow or continuous dripping from dispenser or valve area
What's included: One check ball. Install notes:
- Shut off water supply and unplug the appliance before starting
- Small part — handle carefully and note orientation/seat before removal
- Inspect valve bores and seals for debris; clean area before installing new check ball
Do-It-Yourself Stories from Customers like You
Dishwasher needed a refresh Darron T. • Sherman , NY • April 17, 2017
I ordered new racks, volute and check ball, and new spray arms. Replacing the volute and check ball were the hardest things to do and they were fairly easy to change. The toughest part for me was finding my T15 torxdriver. After replacing these parts the washer operates much better with much higher pressure than what we were experiencing recently.
Read more
More
$54.95
- Compare At:
-
$65.94
- You Save:
-
$10.99
Kelvinator dishwasher valve replacement parts are essential for keeping your appliance running smoothly and efficiently. These parts play a critical role in maintaining the functionality of your dishwasher, ensuring it operates at its best to keep your dishes sparkling clean.
Dishwashers are crucial in our daily lives, saving time and effort by handling one of the most tedious household chores. The Kelvinator dishwasher valve, along with other Kelvinator parts, is designed to control the flow of water into the dishwasher, which is key to its washing and rinsing cycles. OEM replacement parts ensure that these components fit perfectly and work seamlessly with your machine, providing the highest level of performance and reliability.
Good quality Kelvinator dishwasher valves are made to last, reducing the need for frequent replacements and avoiding potential water damage from leaks. If you're looking to keep your dishwasher in top working order, investing in high-quality, compatible parts is a smart move. So, if you need a new valve, rest assured that parts designed specifically for your Kelvinator dishwasher are available to help maintain its optimal performance.
More