Kelvinator Dishwasher Parts

The Dishwasher Tub Gasket is an OEM replacement part for Frigidaire dishwashers. It seals the gap between the dishwasher tub and the door, preventing water leaks and ensuring efficient operation. This tub gasket is typically made of durable rubber or silicone material, designed to withstand the heat, moisture, and chemicals involved in the dishwashing process

Symptoms of a faulty Dishwasher Tub Gasket include:

• Water leaks around the dishwasher door or base
• Failure to maintain proper water levels during cycles
• Condensation buildup or moisture issues outside the tub area
• Visible cracks, wear, or damage to the gasket material

Causes of a bad tub gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Lower Spray Arm is an OEM replacement part for Frigidaire dishwashers. It rotates within the lower dishrack, spraying water during cycles to thoroughly clean dishes. This arm measures approximately 16.00 x 3.10 x 3.10 Inches (L x W x H) NEED TO ORDER 5304518968 SUPPORT,SPRAY LOWER when ordering the lower spray arm

Causes of a bad lower spray arm include normal wear and tear over extended use. Clogs within the arm can also reduce water pressure.

Symptoms of issues with the lower spray arm are: 

• Inadequate cleaning performance, especially on lower rack dishes
• Reduced or uneven water coverage 
• Difficulty rotating or getting stuck

This OEM replacement part is compatible with Electrolux, Gibson, and Kenmore brand dishwashers too.

This splash shield kit is an OEM replacement part that prevents water from spraying beyond the door seal in Frigidaire dishwashers. The kit measures 1.5 inches in length, 0.5 inches in width, and 1.7 inches in height.  This kit is located on the front lower corners of the dishwasher tub. If your dishwasher is leaking due to a damaged or worn-out splash shield, the kit provides a reliable replacement.

Symptoms of a bad splash shield kit include:

• Stains or mineral deposits on surrounding cabinetry   
• Puddles or drips developing outside the dishwasher tub 
• Reduced cleaning ability due to unredirected spray patterns
• Damage, cracks or missing sections of splash shielding 

Causes can be normal wear from extended use breaking down barriers over time. Proper shield alignment is needed to effectively direct spray inside the tub.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.

Symptoms of a faulty Water Inlet Valve include:

• No water or insufficient water entering the washing machine tub
• Washing machine not filling or taking an excessive amount of time to fill
• Leaks or water dripping from the inlet valve area
• Unusual noises or vibrations during the fill cycle

Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.

The Upper Dishrack Assembly is an OEM component specifically designed for Frigidaire dishwashers. It plays a crucial role in supporting dishes during the washing process and allowing for efficient circulation of water underneath to thoroughly clean all surfaces. 

Causes of a bad dishrack can include warping or bending of the wires over time due to heavy loads, or damage from impact or mishandling that causes bent wires or broken support beams. 

Symptoms of a bad upper dishrack include:

• Dishes not drying completely
• Dishes shifting or sliding during the wash cycle 
• Standing water or poor water circulation underneath the rack
• Rust or corrosion building up on dish surfaces

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It plays a critical role in the dishwasher's operation by removing the used water at the end of each wash cycle, ensuring the machine is ready for the next load. This assembly includes the pump that powers the expulsion of water, along with any necessary housing and fittings to connect it securely to the dishwasher's system.

Causes of a bad part can vary from clogs formed by food particles or other debris, to mechanical failure of the pump motor itself. 

Symptoms of a bad Drain Pump Assembly include:

• Water not draining properly from the dishwasher
• Unusual noises coming from the pump area
• The dishwasher fails to start a wash cycle due to the system detecting water from a previous cycle still inside.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Dishwasher Rack Assembly is an OEM part for Frigidaire dishwashers. It provides an adjustable racking system inside the dishwasher tub to accommodate varying sizes of dishes, utensils, and cookware on multiple shelf levels. The rack assembly measures about 22"x 21"x 9" including the wheels.

Symptoms of a bad rack assembly include:

• Broken or missing rack wires that compromise integrity
• Shelves that will not stay locked into desired positions
• Rust or corrosion buildup weakening structural components
• An inability to fully extend or retract racks from the tub

Causes of a bad rack can include deterioration of rack materials from repeated wash cycles, broken mounting connectors, or damage from improper loading methods that put undue stress on the racks.

As an OEM replacement, this Frigidaire dishwasher rack restores safe and dependable use of the cleaning space. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Circulation Pump Motor Kit is an OEM replacement part for Frigidaire dishwashers. This essential kit contains the circulation pump motor, which is responsible for circulating and distributing the water and detergent solution throughout the dishwasher tub during the wash cycle.

Causes of needing to replace the circulation pump motor kit in a dishwasher can include normal wear and tear over time, electrical malfunctions, or physical damage to the pump motor or impeller components due to debris or foreign objects.

Symptoms of a faulty circulation pump motor kit include:

• Inadequate water circulation or spray arm rotation during the cycle
• Loud or excessive noise coming from the pump area
• Leaking or pooling of water around the pump housing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Lower Dishrack Wheel Assembly is an OEM part for Frigidaire dishwashers. This part allows the lower rack to slide in and out easily without causing damage to the dishwasher interior. This part ensures that the rack moves smoothly, providing ease of access to load and unload dishes.

Causes of a bad part can be varied, including normal wear and tear from regular use, overloading the rack with heavy dishes, which puts extra stress on the wheels, or accidental damage during loading or cleaning.

Symptoms of a bad Lower Dishrack Wheel Assembly include:

• The lower rack getting stuck or having difficulty moving in and out.
• Unusual noises coming from the rack as it moves.
• Visible damage or wear to the wheels.
• The rack frequently falling off its tracks due to instability.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Dishwasher Drain Hose is an OEM part for Frigidaire dishwashers. It is crucial for safely channeling waste water from the dishwasher into the drain system, preventing backups and leaks. This flexible hose is designed to withstand the rigors of regular use, including exposure to hot water and detergents, ensuring a reliable path for effluent without risk of damage under normal operating conditions.

Symptoms of a bad Dishwasher Drain Hose include:

• Water pooling around the dishwasher,
• Signs of leakage at the connection points,
• A musty smell indicating standing water in the hose.

Causes of drain hose failure often involve cracks or punctures, which can occur with age or if the hose is improperly installed or subjected to external pressure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It operates as the central "brain" of the dishwasher, controlling functions like cycle selections, wash and rinse levels, heating elements, and input/output sensors.

Causes can be circuitry failures, moisture damage over time, or physical stresses from vibration.

Symptoms of a bad control board include:

• Cycle failure or inability to start or complete washing
• Temperature or input/output sensor malfunctions
• Fault codes appearing or strange appliance behavior
• Unresponsive buttons or input failures

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This base is the lower cabinet support that helps keep the appliance stable and holds internal components in their correct position. Replacing a damaged base restores proper fit, alignment and reduces cabinet movement. What it does:

• Provides structural support for the appliance cabinet and mounting points
• Keeps internal components aligned and maintains correct clearance
• Helps prevent rocking, vibration and gaps at the bottom of the cabinet
• Protects lower components from contact with floor-level debris or uneven surfaces

• Disconnect power and, if applicable, water before beginning work
• Access may require removing the toe kick or lower access panels
• Keep track of mounting screws and brackets; use replacement hardware if original fasteners are corroded

The Frigidaire handle and latch assembly is an OEM replacement part responsible for securing and latching the dishwasher door when it is closed for a wash cycle. This part is typically located on the front panel of the dishwasher, near the top of the door. It ensures that the dishwasher door remains securely closed during operation, preventing water and steam from escaping the interior.

Causes of a bad handle and latch assembly can include repeated use leading to wear and tear, accidental damage from forceful closing or opening, or internal mechanical failures. If the assembly is compromised, the dishwasher may not start, or it could leak during cycles.

Symptoms of a bad handle and latch assembly include:

• Difficulty in opening or closing the dishwasher door
• The door not latching properly
• The dishwasher not starting or pausing mid-cycle
• Water leakage from the door during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Heating Element Nut is an OEM part for Frigidaire dishwashers. It plays a crucial role in securing the heating element in place, ensuring it functions effectively to heat water during the wash cycle. This component ensures the stability and proper operation of the dishwasher's heating element, contributing to the machine's overall efficiency and performance.

Causes of a bad part can include physical damage during maintenance or installation, corrosion over time due to exposure to water and detergents, or general wear and tear that affects its ability to securely hold the heating element in place.

Symptoms of a bad Heating Element Nut include:

• Loose heating element, leading to inefficient heating or water not heating at all
• Water leakage from the heating element area, potentially caused by a poor seal
• Unusual noises during the dishwasher cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This flapper valve is the dishwasher's one-way drain check. It directs wastewater out and helps prevent backflow into the tub, promoting complete draining and reducing standing water, odors, and water returning after the drain cycle.

• Maintains one-way water flow from the sump/pump to the drain hose
• Helps prevent backflow from the sink or air gap into the dishwasher tub
• Wear, warping, or sticking can lead to slow draining or water left in the tub
• May also present as water backing into the tub after a cycle or intermittent drain faults

• Disconnect power and turn off water supply before servicing
• Access the valve at the drain outlet/pump area; note hose and clamp orientation
• Match the original valve orientation; the flapper should open toward the drain hose (direction of flow)
• After reassembly, run a short fill-and-drain test and inspect for leaks and proper draining

The Dishwasher Door Spring is an OEM part for Frigidaire dishwashers. It helps to balance and support the weight of the dishwasher door, allowing it to open and close smoothly and safely. The spring ensures that the door remains stable at any angle, preventing it from dropping too quickly or not staying open. This spring, 8" in length, is sold individually. 

The door spring may need to be replaced if it becomes worn out, stretched, or broken. Causes of a bad door spring can include frequent use, excessive force when opening or closing the door, and general wear and tear over time.

Symptoms of a bad dishwasher door spring include:

• The door dropping open quickly
• Difficulty in keeping the door open at various angles
• The door not closing properly
• Unusual noises when opening or closing the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.