Kelvinator Dishwasher Pump
Genuine Frigidaire part
By: Frigidaire
Part Number: A00126401
The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It plays a critical role in the dishwasher's operation by removing the used water at the end of each wash cycle, ensuring the machine is ready for the next load. This assembly includes the pump that powers the expulsion of water, along with any necessary housing and fittings to connect it securely to the dishwasher's system.
Causes of a bad part can vary from clogs formed by food particles or other debris, to mechanical failure of the pump motor itself.
Symptoms of a bad Drain Pump Assembly include:
- Water not draining properly from the dishwasher
- Unusual noises coming from the pump area
- The dishwasher fails to start a wash cycle due to the system detecting water from a previous cycle still inside.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dishwasher was not draining Bryce K. • Ames , IA • March 16, 2015
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed.
Read more
More
$100.26
- Compare At:
-
$119.31
- You Save:
-
$19.05
Genuine Frigidaire part
By: Frigidaire
Part Number: 154844301
The Circulation Pump Motor Kit is an OEM replacement part for Frigidaire dishwashers. This essential kit contains the circulation pump motor, which is responsible for circulating and distributing the water and detergent solution throughout the dishwasher tub during the wash cycle.
Causes of needing to replace the circulation pump motor kit in a dishwasher can include normal wear and tear over time, electrical malfunctions, or physical damage to the pump motor or impeller components due to debris or foreign objects.
Symptoms of a faulty circulation pump motor kit include:
- Inadequate water circulation or spray arm rotation during the cycle
- Loud or excessive noise coming from the pump area
- Leaking or pooling of water around the pump housing
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
The dishwasher was going through all its cycles filling with water and discharging the soap dish would open but the soap was still in the tray just wet Joel C. • West Haven , CT • March 19, 2017
Replaced the pump motor. Works great again. I saw the picture of the part on the website so I knew I was getting the right part and watched the video to see if there were any shortcuts. Easy job.
Read more
More
$179.95
- Compare At:
-
$214.14
- You Save:
-
$34.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 154728201
This sump assembly is the dishwasher's lower-tub pump housing that circulates and drains wash water. Replacing a cracked or clogged sump restores proper drain and circulation, helping stop leaks and restore normal wash performance. What it does:
- Houses the pump and channels wash water for circulation and draining.
- Restores proper drainage when the dishwasher won't drain or holds water in the tub.
- Stops leaks that develop from cracked or damaged sump housings at the base.
- Reduces pump noise or grinding caused by debris, cracks, or a failing housing.
What's included: One sump assembly. Install notes:
- Disconnect electrical power and water supply before beginning any service.
- Access the sump from the dishwasher's lower front (remove the lower rack and toe-kick/access panel as needed).
- Take care with wiring and hose clamps; transfer any motors, seals, or fittings only if required and follow manufacturer torque/placement.
- After installation, run a short cycle and inspect for proper drain/circulation and any leaks before reassembling trim.
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Kelvinator dishwasher pump replacement parts are essential for maintaining your dishwasher in top shape. These pumps are crucial in ensuring your dishwasher operates efficiently by managing the water flow in and out of the unit. Having a fully functional pump makes a significant difference in the cleanliness of your dishes, making it a cornerstone component of your appliance's performance.
With a well-maintained Kelvinator dishwasher pump, your appliance can handle daily use, ensuring your dishes are spotless every time. While these pumps are designed for durability, eventual wear and tear might necessitate a replacement. That's where Kelvinator parts become indispensable. Whether you need to replace the entire pump or just a component, OEM replacement parts provide the best quality and compatibility.
Original Equipment Manufacturer (OEM) Kelvinator dishwasher parts are specifically designed to fit and function perfectly with your appliance model. These parts are reliable and help you maintain the peak performance of your dishwasher, preventing potential issues in the future.
If you're in need of a new Kelvinator dishwasher pump or any other parts to keep your appliance running smoothly, they are readily available and designed to meet the highest quality standards.
More