Kenmore Elite Dishwasher Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10327249
The Water Inlet Valve is an OEM replacement part for Whirlpool dishwashers. The water inlet valve is responsible for regulating the flow of water into the dishwasher. It is connected to the main water supply and opens and closes as needed to allow water to enter the appliance at the appropriate time and in the correct quantity.
Causes of a bad Water Inlet Valve can include mineral deposits that clog the valve, a failure in the valve's solenoid, or wear and tear over time that affects the valve's ability to open and close properly.
Symptoms of a bad Water Inlet Valve include:
- Dishwasher not filling with water
- Water filling too slowly or too quickly
- Water leaking from the dishwasher
- Unusual noises during the fill cycle
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Note: The white plug connector can be disconnected to allow for connection of the dishwasher wiring if needed.
Do-It-Yourself Stories from Customers like You
No water in the dishwasher. Rohan P. • Troy , OH • January 30, 2022
As mentioned, our Whirlpool Dishwasher would complete the cycle but Tablet pretty much sat in the Soap Dispenser Box nor there was any sign of water inside the Dishwasher. This happened 2 - 3 times. Hence decided to dive into what the fix was.
After reviewing a bunch of Youtube Videos, understood first how a typical Dishwasher operates and what are the basic checks it does before water is let inside. So it typically first checks whether Door S/w got activated, followed by Float Switch...
Read more
More
$51.30
- Compare At:
-
$61.05
- You Save:
-
$9.75
Genuine Lg part
By: Lg
Part Number: 5221DD1001E
The Dishwasher Inlet Valve is an OEM part for LG dishwashers. This valve controls the flow of water into the dishwasher, opening to allow water in at the start of the wash cycle and closing to prevent any further water entry once the desired level is reached. It ensures that the dishwasher receives the correct amount of water for optimal cleaning performance.
Causes of a bad inlet valve can include mineral deposits or debris clogging the valve, electrical issues, or general wear and tear from prolonged use. A malfunctioning valve can lead to improper water levels and potential flooding.
Symptoms of a bad dishwasher inlet valve include:
- The dishwasher not filling with water
- Water entering the dishwasher even when it is turned off
- Incomplete or prolonged wash cycles
- Leaks or puddles of water under the dishwasher
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Will not fill with water
-
overflowing
-
Not cleaning dishes properly
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Lg dishwasher would not cycle due to error e1 Henry F. • Burleson , TX • October 16, 2017
Replaced the water supply valve and the drain dump valve. The drain hose had to be replaced also.
Read more
More
$94.79
- Compare At:
-
$112.80
- You Save:
-
$18.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195036
The Water Level Float is an OEM part for Whirlpool dishwashers. It helps regulate the water level within the dishwasher by rising with the water level and signaling the control board to shut off the water inlet valve when the appropriate level is reached.
Causes of a bad water level float can include wear and tear, mineral buildup or debris obstructing its movement, or damage due to mishandling. Over time, these issues can prevent the float from moving freely or accurately signaling the water level.
Symptoms of a bad water level float include:
- Dishwasher overfilling or underfilling
- Water leaks during the wash cycle
- The dishwasher not completing cycles correctly
- Error codes related to water level issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45