Kenmore / Sears Range / Cooktop / Oven Control Board

This electronic control board manages the appliance's user interface and core control functions so your unit responds to commands and runs cycles correctly. It replaces a faulty console control to restore normal operation and display feedback. What it does:

• Processes user inputs and runs timed cycles and functions shown on the display
• Controls power to subsystems according to selected settings
• Commonly replaced when the unit shows error codes tied to control failure or when controls act erratically

• One electronic control board (console)

• Disconnect power to the appliance before attempting replacement to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available
• Verify connector fit and seating; inspect wiring harnesses for damage before reinstalling

This electronic clock/timer assembly displays the oven time and provides timer and timed-cook functions so you can monitor and control baking cycles. It replaces a failed or non-working oven clock to restore timekeeping and timer features. What it does:

• Displays current time and supports countdown/count-up timer functions
• Enables timed-start and timed-stop cooking features when used with the oven control
• Replaces a blank display, incorrect timekeeping, or a clock that won't respond to timer settings
• Works as the user-facing time/timer module for normal oven operation

• Disconnect power to the appliance at the breaker before starting any work.
• Handle the display and ribbon/connectors carefully to avoid damage to the module.
• Retain mounting screws and note any alignment tabs for proper seating during reassembly.
• After installation, restore power and set the clock/time per the owner's manual.

This electronic clock timer assembly replaces a failed range/oven console clock and timed-cook control so the oven clock, kitchen timer and timed cooking functions work correctly. It restores visible time display and timer control for scheduled cooking. What it does:

• Displays the oven/range time and runs the kitchen timer
• Enables timed start/stop and delayed-cook settings when supported by the console
• Replaces a clock that is blank, frozen, or showing incorrect time
• Resolves unresponsive timer controls or intermittent display issues

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle the control assembly and ribbon/connectors carefully to avoid damage
• Verify electrical connections and secure mounting during reassembly

This electronic control board manages the appliance's user interface and core functions, restoring reliable cycle control and display response when the original board fails. Replacing a faulty board can stop erratic operation and restore normal controls. What it does:

• Interprets user commands and runs programmed cycles for the appliance
• Sends signals to heaters, fans, valves, and motors to coordinate operation
• Common symptom: unresponsive or flashing display and failed cycle starts
• Common symptom: appliance runs erratically or stops mid-cycle

• Power off and disconnect the appliance before starting any work
• Handle the board by its edges and avoid contact with circuitry to prevent static damage
• Follow OEM service manual instructions for removal, connector placements, and grounding

This electronic clock timer controls the oven clock, timed bake/clean functions and the oven's control logic so your range responds correctly to clock and delayed-start settings. Replaces a failed or unresponsive oven control interface. What it does:

• Replaces the oven's electronic clock/control used for time display and timed cooking functions
• Restores clock display and allows timed bake/clean cycles when the original control is blank or nonresponsive
• Helps resolve intermittent oven control behavior tied to a faulty timer/control board
• Works with the oven's existing user interface and wiring harness to manage timed operations

• Disconnect power before attempting service to avoid electrical shock
• Handle with care; avoid touching circuit board contacts or connectors
• Installation requires removing the oven control panel and reconnecting the factory wiring harness

This mechanical cycle timer controls the timed sequencing of a laundry appliance's wash and spin cycles, restoring user control over cycle selection and progression. It replaces a worn or non-advancing console timer for reliable cycle timing. What it does:

• Advances and times cycle stages so wash, rinse and spin steps run in the correct order
• Selects cycle options when the console dial is turned or pushed
• Replaces a timer that won't advance, won't start cycles, or has intermittent control
• Works with the appliance's existing wiring harness and dash controls to restore normal operation

• One mechanical cycle timer

• Disconnect power before beginning any repair to avoid electrical shock
• Turn off water supply and remove access panels as needed for safe access
• Carefully note or photograph wire connections before removal and reconnect wires to matching terminals

This electronic control board replaces the oven's main control module and restores keypad, display and timed cooking functions so the range can operate and maintain set temperatures. What it does:

• Controls oven heating cycles, bake/ broil elements and timed cook functions
• Manages front-panel display and keypad inputs for programming and status
• Regulates temperature signals sent to the oven's sensors and heating relays
• Commonly used when the display is blank, buttons are unresponsive, or cook functions fail

• One electronic control board

• Disconnect power at the breaker before starting any work
• Handle the board carefully to avoid ESD damage; avoid touching circuit traces or components
• Minor disassembly of the control panel may be required; keep screws and fasteners organized

This electronic clock timer controls oven functions, displays time, and manages timed bake or delay-start settings for affected ovens. It restores digital timekeeping and timer-based cooking control for the range's user interface. What it does:

• Provides a digital clock display and keypad timer functions for baking and timed cooking.
• Enables delay-start and timed shutoff features when the oven's control supports them.
• Replaces a faulty or non-responsive oven clock/timer to restore normal time and timer operations.
• Common symptom: clock blank, unresponsive buttons, or oven not following programmed timed functions.

• One clock timer assembly.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access typically requires removing the oven control panel or back panel; keep screws and fasteners organized.
• Handle the control gently and avoid contact with circuit board components; reconnect wiring to original terminals only.

This electronic clock timer replaces a failed oven/range clock and timer assembly to restore timekeeping and timed-cook functions. It provides a readable display and control for oven timer and clock features. What it does:

• Displays clock and timer information so you can set cook times and check the clock
• Operates the oven timer/countdown and audible timer alerts
• Restores a blank, faded, or nonworking clock display
• Replaces an unresponsive or intermittently working clock/timer control

• Disconnect power to the appliance before starting any repair
• Console or control panel access is typically required; handle the display and wiring carefully
• Match harness connections and mounting locations exactly; do not force connectors