Kenmore / Sears Range / Cooktop / Oven Door, Door Glass & Parts

This is the glass panel used in the oven door window. Replace it to restore a clear view into the oven and maintain the door's proper heat barrier if the original pane is cracked, shattered, or damaged.

• Forms the viewing window and thermal barrier in the oven door
• Helps the oven retain heat for consistent cooking
• Direct replacement for a cracked, shattered, or missing pane
• Typical symptoms: visible cracks, shattered glass, rattling fragments, or reduced visibility

• Disconnect power or gas and allow the oven to cool completely before service
• Wear cut-resistant gloves and eye protection; handle broken glass with care
• Support the door; remove the door and any trim as outlined in your model's service information
• Transfer any reusable brackets/trim from the original glass and avoid overtightening fasteners

This is a replacement glass door assembly made by Frigidaire. It is made of tempered glass and allows the user to see into the oven and observe food as it cooks. It also prevents heat from escaping.Glass oven doors can be damaged by contact with cold liquids that cause the glass to contract rapidly. If the glass is cracked or broken, the door will need to be replaced. To replace the oven door, locate the screws under the door lip. Remove the bolts holding the handle to the front, and the door should lift away. Reverse these steps to install the new door. The door is quite heavy and may require two people to safely uninstall/install.This is an OEM part. It is sold individually and is compatible with Kenmore and Frigidaire ovens.

This genuine OEM door outer panel manufactured by Frigidaire is intended to replace a broken or faulty part in ovens. The door outer panel allows the user to easily access the interior of the oven whilst still keeping the heat properly sealed inside the appliance. If the door outer panel becomes worn or deteriorated, including being cracked, dented, bent, or detached, it may prevent the appliance from being used as intended or heating up properly. Make sure that the appliance is completely powered off and unplugged from the outlet before undergoing any repairs. Wear work gloves to prevent injuries.This is door outer panel has been sourced from the manufacturer and is compatible with ovens manufactured by Frigidaire, Electrolux, Gibson, Westinghouse, Kelvinator, and other brands. This part has been made from high-quality, durable, non-corrosive metal, glass, and other materials and is only sold individually.

This flat replacement glass shelf provides a stable, easy-to-clean surface inside the refrigerator to help organize and protect food. It restores proper shelving where the original glass was cracked, scratched, or missing. What it does:

• Replaces a flat refrigerator shelf glass to support food items and containers
• Restores even storage surfaces and prevents spills from soaking shelves below
• Helps maintain refrigerator interior organization and visibility of contents
• Fits into existing shelf supports or trim rails when the original glass is damaged or removed

• One flat replacement glass shelf

• Handle the glass carefully and wear cut-resistant gloves to avoid injury
• Remove food and any trim/shelf supports before swapping the glass
• Place the new glass into the existing rails or supports; do not force or bend components
• If any clips, rails or seals are damaged, replace them before use to ensure proper fit and safety

Outer door glass for oven. Color: white. Glass has clear window.

This Door Glass is the OEM replacement glass panel for the appliance door, restoring a clean appearance and protecting interior components. It replaces damaged, cracked, or scratched door glass so the door looks and functions like new. What it does:

• Replaces broken, cracked, or chipped door glass to restore safety and appearance
• Provides a protective barrier for internal components and insulation
• Helps maintain proper visibility through the door
• Restores a finished exterior surface for easy cleaning

• Disconnect power to the appliance before beginning any repairs
• Handle glass carefully and wear cut-resistant gloves and eye protection
• May require partial or full door disassembly—keep track of fasteners and hardware

A replacement outer glass door panel kit that restores the refrigerator door's appearance and insulating surface. The white outer panel includes foil tape for sealing and finishing the edge for a clean, factory look. What it does

• Replaces a cracked, chipped, or discolored outer glass door panel to improve appearance.
• Restores the door's exterior surface and helps maintain the door edge seal when used with the included foil tape.
• Helps prevent drafts and moisture intrusion at the door edge when installed correctly.
• Matches the original white finish for a factory-style look.

• Disconnect power to the appliance before starting and remove contents from the door.
• Handle the glass panel carefully; wear gloves and eye protection to reduce cut risk.
• Installation typically requires removing the door trim/retainer and carefully replacing the outer glass; keep fasteners and seals organized.

This inner oven door glass replaces a cracked or cloudy inner panel to restore heat containment and visibility. It helps maintain proper oven performance and makes cleaning easier. What it does

• Replaces the oven's inner door glass panel to restore a solid, insulated door assembly
• Helps keep heat in the oven for more consistent cooking and energy use
• Restores clear viewing so you can monitor food without opening the door
• Removes cosmetic cracks, chips, or clouding that can collect grease and grime

• One inner oven door glass panel

• Install only after disconnecting power and allowing the oven to fully cool
• Handle glass with care; wear cut-resistant gloves and eye protection
• Follow the oven manufacturer's service manual for door disassembly/reassembly to avoid damage
• If door springs or brackets are loose or damaged, replace them per OEM guidance

This inner oven door glass is the replacement inner panel that restores the oven door's sealed viewing surface and helps maintain proper heat retention and safe viewing. It fits behind the outer door glass and is a direct-fit OEM-style panel. What it does

• Replaces cracked, chipped, or fogged inner door glass that impairs viewing or creates safety concerns
• Restores a proper sealed door surface to help keep oven heat contained
• Stops rattling or vibration caused by damaged or loose inner glass
• Improves visibility into the oven cavity when the existing inner glass is cloudy or broken

• One oven door inner glass panel

• Disconnect power to the appliance and ensure the oven is completely cool before starting
• Handle glass with care and use gloves/eye protection to prevent cuts
• Installation may require removing the oven door and separating inner and outer glass panels — follow the oven's service manual