Kenmore / Sears Range / Cooktop / Oven Gas Conv Kit Parts

This ignitor orifice assembly routes and meters gas to the oven burner ignitor so the oven lights reliably and reaches cooking temperature. It's a direct-replacement part used when ignition is inconsistent or the burner won't light. What it does:

• Controls gas flow from the manifold to the oven burner ignitor for proper ignition
• Helps ignition occur quickly and consistently so the oven can reach set temperatures
• Common symptoms: oven won't light, delayed or intermittent ignition, or weak/uneven heating
• Works with the oven's ignition system; replaces worn or damaged orifice assemblies

• Turn off electrical power and shut off the gas supply before starting work
• Use proper tools; do not force fittings or over-tighten connections
• After installation, restore power/gas and test the oven for proper ignition and operation

This top burner orifice meters gas to a 14,000-BTU surface burner on your range, maintaining the correct flame size and heat output. Replace a worn or incorrect orifice to restore consistent burner performance and control. What it does

• Regulates gas flow to the 14,000-BTU top burner for proper flame height and shape
• Helps resolve weak or oversized flames and uneven heating
• Can reduce yellow/orange flame tipping and improve simmer control
• Supports reliable ignition by ensuring correct fuel metering

• One 14,000-BTU top burner orifice

• Shut off gas supply and power; allow the cooktop/range to cool before service
• Remove burner cap and head to access the orifice; use the correct socket/wrench
• Install and snug—do not overtighten; verify it's the correct orifice for the burner position and gas type specified for your model
• Reassemble, check for leaks with a soapy-water solution, and verify a stable, blue flame (adjust air shutter if applicable)

For 12k burner.

This assembly combines the spark igniter electrode with the orifice holder for a gas surface burner. It restores dependable ignition and proper gas delivery so the burner lights quickly and consistently.

• Provides the spark to ignite the surface burner
• Routes gas from the valve through the orifice holder to the burner head
• Typical symptoms: burner won't light, clicks but no flame, intermittent ignition, or cracked/chipped igniter insulator
• Replacing a damaged assembly restores reliable ignition at that burner

• Disconnect power and shut off the gas supply before servicing
• Remove grates, caps, and burner head; lift the top or access panel as your model requires
• Disconnect the spark wire, unfasten the old assembly, mount the new one, and reconnect the wire
• Restore gas and power, then check connections for leaks with an approved solution and test ignition

Location: Right front.

This ignitor orifice assembly supplies and meters gas to the burner while positioning the ignitor for reliable ignition, helping restore consistent burner lighting and oven heat. What it does:

• Meters gas flow to the burner and aligns the ignitor for proper spark/heat-up
• Restores reliable ignition when the burner lights slowly or not at all
• Helps maintain a steady flame and consistent cooking temperatures
• Prevents intermittent ignition and repeated sparking during use

• One ignitor orifice assembly

• Shut off gas supply and power to the appliance before starting work
• Access usually requires removing the burner/grate and possibly the oven or range top; use basic hand tools
• Inspect nearby lines and fittings for damage; replace any cracked or corroded parts
• If you smell gas or are uncomfortable working on gas appliances,

This ignitor orifice assembly directs gas to the oven/range ignitor so burners light reliably. It replaces a worn or damaged orifice assembly to restore proper ignition and consistent flame start-up. What it does:

• Channels the correct gas flow to the oven/range ignitor for reliable ignition
• Helps stop delayed or failed ignition when the orifice is clogged or damaged
• Works as a direct replacement component for the ignitor gas path

• One ignitor orifice assembly

• Turn off electrical power and shut off the gas supply before servicing
• Replace with the exact part to maintain safe ignition performance
• Use basic hand tools; avoid forcing fittings or overtightening

This tube and orifice assembly delivers regulated gas from the supply line to a range/oven burner so the appliance lights and maintains a steady flame. It restores correct fuel flow for safe, consistent heating. What it does:

• Directs gas from the manifold to the burner through a precisely sized orifice for proper flame shape and heat
• Helps fix weak or uneven flames, burners that won't ignite, or burners that barely stay lit
• Used when the existing tube is damaged, bent, clogged, or the orifice is worn or incorrect
• Works with the appliance's factory gas system to maintain proper combustion when correctly installed

• One tube and orifice assembly

• Turn off gas supply and power to the appliance before starting work
• Use proper tools and fittings; verify correct orientation and seating of the orifice and tube
• After installation, perform a leak test and observe burner ignition and flame pattern

This orifice is the small gas jet that meters fuel to a range or oven burner, helping restore correct flame size and consistent heat for reliable cooking performance. What it does:

• Controls the gas flow to a burner, producing the correct flame for even heating
• Commonly used when flame is unusually small, weak, or uneven
• Helps address burners that light slowly or do not reach proper temperature
• Works as part of the burner assembly with the regulator and valve to maintain safe operation

• One orifice

• Turn off gas supply and electrical power before starting work
• Do not force threads; use appropriate thread sealant if specified by OEM
• After installation, check all fittings for leaks with a gas-safe detector or soapy water

Location: Right rear.

Natural gas. SM 1.07mm

This orifice is a replacement gas jet sized for a stovetop top burner to deliver approximately 8,000 BTU when used with liquid propane (LP), helping burners light and burn evenly. It's a direct-fit service part for compatible ranges and cooktops. What it does:

• Controls gas flow to a single top burner to produce the correct flame size for LP operation
• Restores consistent ignition and steady flame when a burner is weak or won't stay lit
• Helps maintain proper cooking temperatures by metering fuel to the burner
• Used when converting a burner or replacing a worn or damaged orifice

• One top burner orifice (8K, LP)

• Installation requires removing the burner cap and unscrewing the existing orifice; use appropriate fittings and tools
• Turn off the gas supply and power to the range before servicing; work in a well-ventilated area
• After installation, check for leaks with a soap solution and confirm proper ignition and flame characteristics

This LP conversion kit lets a compatible gas range or cooktop be converted for use with propane (LP) fuel, restoring safe burner performance after changing fuel types. Use the kit to adapt fuel delivery and burner settings for LP operation. What it does:

• Reconfigures burner fuel delivery for propane so the appliance operates on LP instead of natural gas
• Provides the parts needed to change orifices and adjust pressure flow for LP-compatible combustion
• Helps correct symptoms like poor burner ignition, low flame size, or uneven heating when set up for the wrong fuel
• Supports safe, manufacturer-recommended fuel conversion when installed correctly

• LP conversion kit components

• Installation should follow the manufacturer's conversion instructions exactly
• Turn off and disconnect the gas supply before beginning work
• After installation, test for leaks and verify proper burner ignition and flame characteristics

LP orifice / size #93 (9.5k)