Kitchenaid Cooktop Parts

Cooktop burners not heating? A blown thermal fuse cuts power to prevent overheating. Test for continuity and replace to restore heating function.

This oven burner supplies the bake flame in a gas oven, restoring consistent heat for baking and roasting. Replace a damaged or corroded burner to help recover even cooking and reliable ignition. What it does:

• Produces the primary bake flame for the oven cavity so food cooks evenly.
• Replaces a warped, cracked, or heavily corroded burner that can cause weak or uneven heating.
• Can resolve symptoms such as the oven not reaching temperature, uneven baking, or a burner that won't light reliably.
• Works with the oven's ignition and gas flow system; proper flame appearance is important for safe operation.

• Turn off gas supply and electrical power to the appliance before beginning any service.
• Remove oven racks and access panels to reach the burner; retain all fasteners.
• Inspect and clean the burner ports and ignition area during replacement; avoid bending or damaging the burner ports.

Replace your range door gasket to restore a tight seal and prevent heat loss. Fits worn or cracked seals so your oven door closes properly. Confirm fit.

Downdraft cooktop grease filter removes cooking residue from ventilation air. Replace monthly with normal use or when clogged. Verify fit with model.

Replacement knob bezel for gas cooktops. Sits behind burner control knobs as a decorative base. Replace if cracked, broken, or missing from wear.

Convert your gas range from natural gas to propane or propane to natural gas. Includes all orifices and parts needed for fuel type conversion installation.

Fix burners that won't light with a new spark electrode. This surface igniter restores reliable ignition so your gas cooktop burners light instantly.

This control knob fits the surface burner valve stem on select gas cooktops/ranges, letting you turn the burner on and adjust flame level. Replacing a damaged or missing knob restores precise, reliable burner control and a clean look.

• Rotates the surface burner valve to ignite and modulate flame
• Common signs it's needed: knob is cracked, stripped, loose, hard to turn, or missing
• Ensures accurate burner selection and flame adjustment

• Allow the appliance to cool and verify all burners are in the OFF position
• Pull the old knob straight off the valve stem; do not twist forcefully
• Align the new knob with the stem and press straight on until fully seated
• Test each position (Off/Light/Adjust) for smooth operation before use

The burner base is the metal burner head that supports the burner cap and directs the cooktop flame. Replacing a damaged burner base helps restore steady ignition and more even heat for everyday cooking. What it does:

• Provides the mounting surface and gas-port pattern for a surface burner and accepts the burner cap.
• Directs the flame for consistent heat across cookware.
• Common symptoms of a failing burner base: uneven or weak flame, burner won't light, visible corrosion or physical damage.
• Can cause repeated ignition attempts or poor heating when cracked, bent, or clogged.

• Turn off electrical power and the gas supply before servicing the range.
• Remove burner grates and caps to access the base; depending on model the base may lift out or be secured with fasteners.
• Inspect the igniter and surrounding components while replacing the base; reassemble and test the burner for proper ignition and flame pattern.

Meters gas flow to your range burner for consistent flames. Replace if clogged, damaged, or worn to restore proper gas distribution and safe operation.

Rubber grommet that seals and cushions the control knob base on cooktops and ranges. Replace when cracked, worn, or missing to restore appearance.

Burner won't light or clicks continuously? This gas range surface igniter creates the spark to ignite cooktop burners. Simple DIY repair.

Fix an oven that shuts off during heating or a timer that won't work. This gas range electronic control board regulates temperature and cooking functions.

Color: Stainless

The Door Handle is an OEM part for Whirlpool microwaves. It is an external component consumers interact with frequently for opening and closing access to the microwave interior.

Causes of a bad door handle can include normal wear and tear affecting functionality over thousands of uses. Thin plastics or loose hardware holding the handle can deteriorate more quickly.

Symptoms of a bad door handle include:

• The handle no longer latches the door securely  
• Difficulty opening or closing the microwave door
• The handle coming loose or detaching completely
• Issues using locking/unlocking mechanisms

This OEM replacement Whirlpool door handle ensures smooth, dependable performance for the lifespan of the microwave. Its sturdy construction and precise fit maintain usability. This OEM part is also compatible with Maytag, Roper, Jenn-Air, Admiral, KitchenAid, and Frigidaire microwaves.
 

This oven bottom pan replaces the removable bottom tray that catches spills and protects the oven floor, restoring an even surface for cooking and easier cleanup. Fits in the lower cavity under the oven racks. What it does:

• Provides a durable, porcelain-coated surface to catch drips, crumbs and spills during baking and roasting
• Helps prevent spills from contacting the oven floor and heating elements
• Restores a flat, stable cooking surface for pans and bakeware
• Can reduce time spent scrubbing baked-on messes when used with proper liners

• One oven bottom pan

• Allow the oven to cool completely and disconnect power before replacing the pan
• Remove oven racks, slide out the old pan, then slide the replacement into the same position
• No special tools typically required; handle carefully to avoid chipping the coating

Replace cracked, chipped, or missing cast-iron cooktop grates on your gas range. This 2-piece grate kit restores stable support for cookware.