Kitchenaid Cooktop Parts

White support rack that secures a dishwasher rack to its track, keeping the rack aligned for smooth sliding and safer loading. Replaces broken or worn supports to restore proper rack function and stability. What it does:

• Holds the dishwasher rack in place so it slides smoothly and stays level.
• Prevents the rack from slipping, leaning, or falling during loading and unloading.
• Reduces noise and wobbling caused by damaged or missing rack supports.
• Restores proper rack alignment for consistent wash performance and safe loading.

• Disconnect power to the appliance before starting any repair; follow all safety precautions.
• Remove the affected rack to access the support; inspect adjacent clips or tracks for damage.
• Align the support with the rack/track and snap or secure it into place; confirm the rack slides and sits level.

This lower thermostat monitors and helps regulate temperature in the appliance's lower compartment by opening and closing an electrical contact. Replacing a failing thermostat can restore normal cycling and help the compartment maintain correct temperatures. What it does:

• Senses lower-compartment temperature and completes or breaks the circuit to control cooling cycles.
• Helps the compressor/fan cycle on and off to maintain set temperatures.
• A defective thermostat may cause warm temperatures, continuous compressor operation, or inconsistent cooling.
• Matches the OEM function and mounting location for lower compartment temperature control.

• Disconnect power to the appliance before beginning any service.
• Label or tag wires before removal and reconnect exactly to the same terminals.
• Handle the sensor and capillary carefully; avoid kinking or excessive bending. After installation, restore power and verify normal cycling.

This surface burner knob replaces a worn or missing control knob on your gas cooktop or range, restoring precise flame adjustment and a clean, finished look. It fits onto the burner valve stem for smooth, reliable operation.

• Turns the surface burner valve to control flame level from low to high
• Common fix for knobs that are cracked, stripped, loose, hard to turn, or missing
• Helps when burner heat is difficult to set or won't hold steady
• Restores consistent, easy-to-grip control of the burner

• Turn off power and ensure all burners are cool before starting; shut off gas supply if working near the control area
• Pull the old knob straight off the valve stem—do not pry against the control panel
• Align the new knob with the stem orientation and press firmly until fully seated
• Test burner operation to confirm smooth adjustment through the full range

Control knob restores a worn or damaged range/stove control interface so you can select settings reliably. Installs quickly to replace missing, cracked, or loose knobs and improve control feel. What it does:

• Replaces a damaged or missing flush-style control knob so you can select heat/power settings accurately.
• Fits over the control shaft to provide a secure grip and tactile feedback when turning.
• Common symptoms: broken, loose, cracked, or missing knob; difficulty selecting or holding settings.
• Helps prevent accidental setting changes compared with a worn or slippery knob.

• One control knob

• Disconnect power to the appliance and turn off gas supply before beginning work.
• Remove the old knob by pulling it straight off the control shaft; align and push the new knob onto the splines until it seats.
• Do not force a knob that doesn't fit—verify shaft type and orientation before installing.
• After installation, restore power/gas and test all control positions for correct operation.

This thermal fuse is a one-time safety cutoff that stops heat when temperatures rise above safe limits, protecting the appliance from overheating. Replace a blown fuse to restore proper thermal protection and heating control. What it does:

• Opens the circuit to the heating element when overheating is detected to prevent unsafe temperatures.
• Common symptom: dryer runs but produces little or no heat.
• Can cause dryers to stop heating even though the motor and controls seem to work.
• Helps prevent thermal damage or fire by cutting power to the heater when needed.

• Disconnect power to the appliance before accessing the heating assembly.
• Replace with the exact OEM part; match terminals and mounting location.

Replacement cooktop surface assembly that restores the top of the range for safe, even cooking and a finished appearance. Use this part to replace cracked, warped, or cosmetically damaged cooktop tops. What it does:

• Replaces the cooktop surface so burners and grates seat correctly and cookware sits level.
• Protects internal components from spills, debris, and heat exposure.
• Stops visible cracks, chips, or warping that can cause smoke or poor burner contact.
• Restores the appliance's finished look and makes cleaning easier.

• Disconnect power (and shut off gas for gas ranges) before starting any work.
• Remove grates, burners, and knobs as needed; handle the surface carefully to avoid cuts or additional breakage.
• Some installations require two people due to size and weight—use proper lifting techniques.
• Follow the manufacturer's installation instructions.

The Filter is an OEM part for Whirlpool cooktops. This part is responsible for trapping grease and other airborne particles, ensuring that your kitchen remains clean and free from unwanted odors during cooking. It effectively captures grease and prevents it from accumulating in the exhaust system.

A bad grease filter can occur due to clogging, damage, or excessive wear. If you notice symptoms such as poor ventilation, persistent cooking odors, or visible grease buildup in the downdraft vent, it may be time to replace the worn-out or clogged grease filter with this genuine OEM part.

Symptoms of a bad grease filter include:

• Poor ventilation and airflow
• Lingering cooking odors
• Visible grease accumulation in the downdraft vent

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Surface Ignitor is an OEM part for Whirlpool ranges and cooktops. This component is responsible for generating the spark needed to ignite gas burners on the cooktop or oven pilot light.

Causes of a bad Surface Ignitor can include wear and tear over time due to repeated use during ignition. Physical damage is also possible.

Symptoms of a failed surface ignitor include:

• Inability to ignite any gas burners
• Repeated sparking sounds but no ignition
• Yellow burner flames instead of blue

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a knob bezel that is used on a variety of ranges, stoves, and ovens. The knob bezel sits behind the burner knobs. It acts as a base for the knob assembly. Regular use can cause damage to the knob bezel. It can also break and be lost. When this occurs, the knob bezel will need to be replaced.Replacing the knob bezel is simple and takes only a short amount of time. No tools are required for the process but a pair of work gloves can be useful. First, makes sure the stove or range is powered off and none of the burners are hot. Located the knob with the damaged or missing bezel and pull on it to bring it out of the stove. The knob bezel can be removed by hand. Install the new bezel and replace the knob.The knob bezel is a genuine OEM part and is sold as an individual product. It is made to be used with ranges, ovens, and stoves manufactured by Whirlpool and KitchenAid.

Color: Stainless

The Door Handle is an OEM part for Whirlpool microwaves. It is an external component consumers interact with frequently for opening and closing access to the microwave interior.

Causes of a bad door handle can include normal wear and tear affecting functionality over thousands of uses. Thin plastics or loose hardware holding the handle can deteriorate more quickly.

Symptoms of a bad door handle include:

• The handle no longer latches the door securely  
• Difficulty opening or closing the microwave door
• The handle coming loose or detaching completely
• Issues using locking/unlocking mechanisms

This OEM replacement Whirlpool door handle ensures smooth, dependable performance for the lifespan of the microwave. Its sturdy construction and precise fit maintain usability. This OEM part is also compatible with Maytag, Roper, Jenn-Air, Admiral, KitchenAid, and Frigidaire microwaves.
 

This control knob fits the surface burner valve stem on select gas cooktops/ranges, letting you turn the burner on and adjust flame level. Replacing a damaged or missing knob restores precise, reliable burner control and a clean look.

• Rotates the surface burner valve to ignite and modulate flame
• Common signs it's needed: knob is cracked, stripped, loose, hard to turn, or missing
• Ensures accurate burner selection and flame adjustment

• Allow the appliance to cool and verify all burners are in the OFF position
• Pull the old knob straight off the valve stem; do not twist forcefully
• Align the new knob with the stem and press straight on until fully seated
• Test each position (Off/Light/Adjust) for smooth operation before use

RF White

The burner base is the metal burner head that supports the burner cap and directs the cooktop flame. Replacing a damaged burner base helps restore steady ignition and more even heat for everyday cooking. What it does:

• Provides the mounting surface and gas-port pattern for a surface burner and accepts the burner cap.
• Directs the flame for consistent heat across cookware.
• Common symptoms of a failing burner base: uneven or weak flame, burner won't light, visible corrosion or physical damage.
• Can cause repeated ignition attempts or poor heating when cracked, bent, or clogged.

• Turn off electrical power and the gas supply before servicing the range.
• Remove burner grates and caps to access the base; depending on model the base may lift out or be secured with fasteners.
• Inspect the igniter and surrounding components while replacing the base; reassemble and test the burner for proper ignition and flame pattern.

This Thermostat L225 is a temperature limit thermostat that helps regulate heat and prevent overheating in the appliance. It restores proper temperature control so the unit runs safely and more reliably. What it does:

• Acts as a temperature-regulating limit switch to stop heating when limits are reached
• Prevents overheating by opening the circuit at excessive temperatures
• Common symptom: appliance heating inconsistently or cutting out during cycles
• Can be checked for continuity when diagnosing heating problems

• Always disconnect power to the appliance before starting any repair
• Handle and install the part in the same orientation and mounting as the original
• Verify electrical connections are secure and use a multimeter to test continuity
• If other safety devices (thermal fuses/thermistors) failed, inspect and replace as needed per OEM guidance

This backsplash restores the rear trim behind a range or cooktop, protecting the wall and covering wiring openings for a clean, factory-look finish. It replaces a damaged, dented, or missing backsplash to improve safety and appearance. What it does:

• Covers the gap between the cooktop and the wall to block spills, splashes, and heat from reaching the wall surface
• Hides wiring and mounting holes for a neat, finished look
• Replaces bent, cracked, or corroded rear trim that can collect grease and grime
• Helps maintain proper clearance and original appearance of the appliance

• One single-piece backsplash

• Basic hardware and mounting locations are OEM-specific; confirm matching fasteners on arrival
• Turn off power to the appliance and move the unit away from the wall before removing or installing the backsplash
• Use care to avoid scratching the finish during installation; two people may be needed for larger ranges
• If mounting holes or brackets are damaged, replace those items before installing this backsplash

The Grease Filter is an OEM part for Whirlpool downdraft cooktops. It is responsible for removing grease and other cooking residue from the air before it is circulated back into the kitchen.

Causes of a bad grease filter include excessive grease buildup that prevents proper airflow and filtration. Grease filters should be cleaned regularly according to the manufacturer's recommendations.

Symptoms of a grease filter that needs replacement include:

• Reduced or inefficient airflow while in use
• Visible grease buildup or clogging of the filter screens

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.