Kmart String Trimmer Parts

24.932" boom assembly for gas line trimmers. Includes internal drive shaft. Replace if boom tube is bent, cracked, or damaged from impact or wear.

Carburetor assembly for edgers and gas trimmers. Mixes fuel and air for combustion. Replace if cracked, damaged, or leaking to restore proper operation.

This short block assembly is a genuine MTD part, sold individually. This short block assembly can be used as a replacement part for a string trimmer, a tiller, or an edger. The short block includes the crankshaft, piston, rod, camshaft, valves, and governor. A short block assembly might be necessary if there is damage to a wide range of parts in the equipment's engine. Check for frequent stalling, misfires, or an inability to power on. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This short block assembly is compatible with the following brands: MTD, Craftsman, and Cub Cadet.

Replacement fuel cap for lawn tractors, trimmers, blowers, and tillers. Prevents fuel leaks and evaporation. Replace if cracked, broken, or missing.

Replacement throttle trigger spring for gas line trimmers. Installs inside the throttle trigger assembly. Needed when original spring is broken or missing.

Protective shield that mounts over the edger blade to block flying debris and stones. Replace if cracked, broken, or missing for safe operation.

Replacement fuel tank assembly for tillers, edgers, and trimmers. Includes attached fuel line. Replace your cracked, leaking, or damaged tank reservoir.

Carriage screw that secures various components on lawn mowers and snowblowers. Replace if your screw is stripped, loose, missing, or damaged during use.

Carburetor gaskets ensure that the space between the carburetor itself and the insulator is properly sealed. This prevents air from seeping into the engine. As time passes, gaskets begin to become worn and crack, which can lead to small air leaks. If the gasket deterioration becomes severe the leaks will worsen. An air leak on an engine can cause vibrations and misfires. Gaskets should be regularly replaced to prevent engine trouble. This carburetor gasket is a genuine OEM part that has been sourced directly from the manufacturer. This carburetor gasket is manufactured from a top-quality composite material. This replacement gasket fits a number of different models of Troy-Bilt and Craftsman lawn and garden equipment. Please note these gaskets are sold individually.

This clutch assembly engages and disengages the drive system on a tiller, allowing the tines to spin when the clutch lever is activated. It transfers power from the engine to the tine shaft. Replace this assembly if the tines won't engage, slip during operation, or if the clutch lever no longer controls tine rotation properly.

Replacement oil drain plug for outdoor power equipment engines. Installs in the oil pan to seal the drain opening. Replace if stripped, cracked, or leaking.

Throttle trigger handle for gas line trimmers. Mounts to the control handle shaft to control engine speed. Replace if broken, cracked, or stuck in position.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

Air cleaner assembly for string trimmers prevents dirt and debris from entering the engine. Replace when clogged or damaged to maintain performance.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.