Parts for Kenmore 721.62253200 (72162253200, 721 62253200): Latch Board Parts

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

Mounting screw for ovens, ranges, and microwaves. Secures panels, brackets, and internal components. Replace if stripped, missing, or damaged.

Mounting screw for microwave installation and panel assembly. Replace if stripped, missing, or damaged during maintenance. Essential hardware component.

Truss head tapping screw secures panels, brackets, and covers in appliances. Replaces missing or damaged fasteners to restore snug fit and alignment.

Replacement mounting screw for microwave installation and assembly. Use when original screws are lost, stripped, or damaged during service or relocation.

Mounting screw for microwave assembly. Secures internal or external components. Replace if stripped, missing, or damaged during repair or installation.

Microwave won't start or stops mid-cycle? This door latch assembly engages door hooks and activates interlock switches to restore proper operation.

This control panel user interface assembly replaces a damaged or unresponsive front control module so you can operate the appliance normally. It houses the touchpad/buttons and display used to set cycles, temperatures, and functions. What it does:

• Replaces the front user interface so the appliance accepts inputs from buttons or a touchpad
• Restores visible status and cycle information when the display is dim, garbled, or blank
• Prevents intermittent or no-response behavior caused by a cracked keypad or damaged panel electronics
• Works as the primary interface between the user and the appliance control board

• Disconnect power (unplug or breaker) before starting any repair to avoid shock or damage.
• Remove any trim, bezel, or mounting screws to access the panel; handle the display and glass carefully to avoid scratches.
• Disconnect ribbon cables and wiring harnesses gently; note connector orientation for reinstallation.
• After installation, reconnect power and test all buttons/functions before reassembling trim.

Glass turntable tray for microwaves. Provides a stable, food-safe rotating surface for even heating. Replace your cracked, chipped, or missing tray.

This is a wire holder clip used inside a microwave to secure and route internal wiring. It keeps wires organized and safely positioned away from heat sources and moving components. Replace this holder if it is broken or missing, which can allow wires to hang loose and potentially contact hot surfaces or interfere with other parts.

This circular support ring holds and rotates the glass turntable inside your microwave. It rolls on small wheels to ensure even heating by rotating food during cooking cycles. Replace if the turntable doesn't rotate, makes grinding noises, or the ring is cracked or warped.

Turntable stopped turning or making noise? This microwave motor rotates the glass tray for even heating. Easy DIY fix with basic tools in under an hour.

A protective plastic or resin shield that covers the microwave's waveguide or other internal components from food splatter and damage. Located on the interior ceiling or side wall of the microwave, it should be replaced if cracked, burned, melted, or shows signs of arcing damage.

Fix a microwave that won't start or runs with the door open. This door interlock switch ensures safe operation by detecting when the door is fully closed.

Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.

This thermostat controls refrigerator temperature to help maintain proper cooling and prevent spoilage. It replaces a failed or inaccurate temperature control to restore consistent operation. What it does:

• Senses internal temperature and signals the compressor to cycle on/off
• Helps keep food at steady, safe temperatures when functioning correctly
• Commonly replaces thermostats that cause warm temperatures or inconsistent cooling
• Works as a direct replacement when matching the OEM part number

• Always disconnect power to the appliance before servicing to avoid shock or injury
• Handle the sensor and terminals carefully; avoid bending or damaging components
• Basic hand tools are typically required; follow your model's service manual for exact instructions

Replace your microwave door seal cushion to restore proper door closure and prevent heat loss. Essential when the seal is worn, cracked, or loose. Verify fit with your model number before ordering.